FprEN ISO 4064-2
(Main)Water meters for cold potable water and hot water - Part 2: Test methods (ISO/FDIS 4064-2:2024)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO/FDIS 4064-2:2024)
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser- Teil2: Prüfverfahren (ISO/FDIS 4064-2:2024)
Dieses Dokument gilt für die Baumusterprüfung und die Ersteichung von Wasserzählern für kaltes Trinkwasser und heißes Wasser, die in ISO4064-1:||OIMLR49-1:- definiert sind. Die OIML-Kon formitätszertifikate können für Wasserzähler ausgestellt werden, die in den Anwendungsbereich des OIML-Zertifizierungssystems fallen, vorausgesetzt, dass dieses Dokument, ISO4064-1:||OIMLR49-1:2024 und ISO4064-3:||OIMLR49-3:- in Übereinstimmung mit den Regeln des Systems angewendet werden.
Dieses Dokument legt die Einzelheiten des Prüfprogramms, Grundsätze, Ausrüstung und Verfahren fest, die für die Baumusterprüfung und die Ersteichung einer Zählerart zum Einsatz kommen.
Die Bestimmungen dieses Dokuments gelten ebenfalls für Zusatzeinrichtungen, sofern diese aufgrund natio naler Regelungen erforderlich sind.
Die Bestimmungen enthalten Anforderungen an die Prüfung des vollständigen Wasserzählers sowie an die Prü fung des Messwertgebers (einschließlich Durchfluss- und Volumensensor) und des Rechners (einschließlich Anzeigeeinrichtung) von Wasserzählern als eigenständige Einheiten.
Compteurs d'eau potable froide et d'eau chaude - Partie 2: Méthodes d'essai (ISO/FDIS 4064-2:2024)
Vodomeri za merjenje hladne pitne vode in vroče vode - 2. del: Preskusne metode (ISO/FDIS 4064-2:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 4064-2:2023
01-december-2023
Vodomeri za merjenje hladne pitne vode in vroče vode - 2. del: Preskusne metode
(ISO/DIS 4064-2:2023)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO/DIS 4064
-2:2023)
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 2:
Prüfverfahren (ISO/DIS 4064-2:2023)
Compteurs d'eau potable froide et d'eau chaude - Partie 2: Méthodes d'essai (ISO/DIS
4064-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 4064-2
ICS:
17.120.10 Pretok v zaprtih vodih Flow in closed conduits
91.140.60 Sistemi za oskrbo z vodo Water supply systems
oSIST prEN ISO 4064-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 4064-2:2023
oSIST prEN ISO 4064-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-2
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-10-09 2024-01-01
Water meters for cold potable water and hot water —
Part 2:
Test methods
Compteurs d'eau potable froide et d'eau chaude —
Partie 2: Méthodes d'essai
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4064-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 4064-2:2023
ISO/DIS 4064-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-2
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
Water meters for cold potable water and hot water —
Part 2:
Test methods
Compteurs d'eau potable froide et d'eau chaude —
Partie 2: Méthodes d'essai
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4064-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 4064-2:2023
ISO/DIS 4064-2:2023(E)
Contents Page
Foreword .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Reference conditions .3
5 Symbols, units and equations . 3
6 External examination . 3
6.1 General . 3
6.2 Object of the examination . 4
6.3 Preparation . 4
6.4 Examination procedures . 4
6.4.1 General . 4
6.4.2 Marks and inscriptions ( ISO 4064-1:xxx|OIML R 49-1:xxx, 6.6) . 4
6.4.3 Indicating device ( ISO 4064-1:xxx|OIML R 49-1:xxx, 6.7) . 4
6.4.4 Protection devices ( ISO 4064-1:xxx|OIML R 49-1:xxx, 6.8) . 8
7 Performance tests for all water meters . 8
7.1 General . 8
7.2 Required conditions for all tests . 8
7.2.1 Water quality . 8
7.2.2 General rules concerning test installation and location . 9
7.3 Static pressure test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 4.2.10). 9
7.3.1 Object of the test . 9
7.3.2 Preparation . 9
7.3.3 Test procedure. 9
7.3.4 Acceptance criteria . 10
7.4 Determination of intrinsic errors (of indication) ( ISO 4064-1:xxx|OIML R 49-1:xxx,
7.2.3) . 10
7.4.1 Object of the test . 10
7.4.2 Preparation . 10
7.4.3 Combination meters . 16
7.4.4 Test procedure. 16
7.4.5 Acceptance criteria . 17
7.4.6 Interchange test on all types of cartridge meters and meters with
exchangeable metrological modules ( ISO 4064-1:xxx|OIML R 49-1:xxx,
7.2.7) . 17
7.5 Water temperature test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 4.2.8) . 18
7.5.1 Object of the test . 18
7.5.2 Preparation . 18
7.5.3 Test procedure. 18
7.5.4 Acceptance criteria . 19
7.6 Overload water temperature test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 7.2.5) . 19
7.6.1 Object of the test . 19
7.6.2 Preparation . 19
7.6.3 Test procedure. 19
7.6.4 Acceptance criteria . 19
7.7 Water pressure test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 4.2.8) . 19
7.7.1 Object of the test . 19
7.7.2 Preparation . 19
7.7.3 Test procedure. 19
7.7.4 Acceptance criteria . 20
7.8 Reverse flow test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 4.2.7) . 20
7.8.1 Object of the test . 20
iii
oSIST prEN ISO 4064-2:2023
ISO/DIS 4064-2:2023(E)
7.8.2 Preparation . 20
7.8.3 Test procedure.20
7.8.4 Acceptance criteria . 21
7.9 Pressure loss test ( ISO 4064-1:xxx|OIML R 49-1:xxx, 6.5) . 21
7.9.1 Object of the test . 21
7.9.2 Equipment for pressure loss test . 21
7.9.3 Test procedure.23
7.9.4 Calculation of the actual Δp of a water meter. 25
7.9.5 Acceptability criteria .25
7.10 Flow disturbance tests ( ISO 4064-1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.