EN ISO 18750:2018

Intelligent transport systems - Co-operative ITS - Local dynamic map (ISO 18750:2018)

This document:
—    describes the functionality of a "Local Dynamic Map" (LDM) in the context of the "Bounded Secured Managed Domain" (BSMD);
—    specifies:
—    general characteristics of LDM Data Objects (LDM-DOs) that may be stored in an LDM, i.e. information on real objects such as vehicles, road works sections, slow traffic sections, special weather condition sections, etc. which are as a minimum requirement location-referenced and time-referenced;
—    service access point functions providing interfaces in an ITS station (ITS-S) to access an LDM for:
—    secure add, update and delete access for ITS-S application processes;
—    secure read access (query) for ITS-S application processes;
—    secure notifications (upon subscription) to ITS-S application processes;
—    management access:
—    secure registration, de-registration and revocation of ITS-S application processes at LDM;
—    secure subscription and cancellation of subscriptions of ITS-S application processes;
—    procedures in an LDM considering:
—    means to maintain the content and integrity of the data store;
—    mechanisms supporting several LDMs in a single ITS station unit.

Intelligente Verkehrssysteme - Kooperative ITS - Lokale dynamische Karten (ISO 18750:2018)

Système de transports intelligents - Systèmes coopératifs - Carte locale dynamique (ISO 18750:2018)

Ce document
—    décrit la fonctionnalité d’une «Carte dynamique locale» (LDM) dans le contexte du «Domaine délimité géré de manière sécurisée» (BSMD).
—    spécifie
—    les caractéristiques générales des objets de données de la LDM (LDM-DO) pouvant être stockés dans une LDM, notamment les informations sur les objets réels tels que les véhicules, les zones de travaux, les zones de ralentissement du trafic, les zones caractérisées par des conditions météorologiques particulières, etc. qui doivent, au minimum, posséder une référence spatiale (localisation) et une référence temporelle.
—    les fonctions des points d’accès au service fournissant des interfaces d’accès à une LDM dans une station ITS (ITS-S) pour,
—    les accès sécurisés d’ajout, de mise à jour et de suppression, pour les processus d’application ITS-S,
—    les accès sécurisés en lecture (requête), pour les processus d’application ITS-S,
—    les notifications sécurisées (lors de l’abonnement) aux processus d’application ITS-S.
—    la gestion des accès,
—    enregistrement, désenregistrement et révocation de manière sécurisée des processus d’application ITS-S au niveau de la LDM
—    abonnement et annulation des abonnements des processus d’application ITS-S de manière sécurisée,
—    les procédures d’une LDM tenant compte
—    des modalités de maintien du contenu et de l’intégrité du magasin de données,
—    les mécanismes soutenant plusieurs LDM dans une unité de station ITS unique.

Inteligentni transportni sistemi - Kooperativni sistem - Lokalni dinamični zemljevidi (ISO 18750:2018)

Ta dokument:
– opisuje funkcionalnost »lokalnega dinamičnega zemljevida« (LDM) v okviru »omejene varovane
upravljane domene« (BSMD);
– določa:
– splošne značilnosti podatkovnih objektov lokalnega dinamičnega zemljevida (LDM-DO), ki so lahko shranjene v lokalnem dinamičnem zemljevidu, tj. informacije o resničnih objektih, kot so vozila, odseki z deli na cesti, odseki s posebnimi vremenskimi pogoji itd., pri čemer je minimalna zahteva lokacijska referenca in časovna referenca;
– funkcije vstopne točke storitve, ki v postaji ITS (ITS-S) zagotavljajo vmesnik za dostop do lokalnega dinamičnega zemljevida za:
– varno dodajanje, posodobitev in izbris dostopa za postopke aplikacije ITS-S;
– varen dostop za branje (poizvedba) za postopke aplikacije ITS-S;
– varna obvestila (po naročnini) za postopke aplikacije ITS-S;
– dostop za upravljanje:
– varna registracija, izbris registracije in ukinitev postopkov aplikacije ITS-S v lokalnem dinamičnem zemljevidu;
– varna naročnina in preklic naročnin za postopke aplikacije ITS-S;
– postopki v lokalnem dinamičnem zemljevidu, ki obravnavajo:
– sredstva za ohranjanje vsebine in integritete shrambe podatkov;
– mehanizme, ki podpirajo več lokalnih dinamičnih zemljevidov v eni enoti postaje ITS.

General Information

• Status: Published
• Publication Date: 12-Jun-2018
• Withdrawal Date: 30-Dec-2018
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 16 - Co-operative systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Jun-2018
• Completion Date: 13-Jun-2018
• Directive: 2010/40/EU - Directive 2010/40/EU of the European Parliament and of the Council of 7 July 2010 on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport Text with EEA relevance
• Mandate: M/453 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of information and communication technologies to support the interoperability of co-operative for intelligent transport in the european community
• Ref Project: SIST EN ISO 18750:2018 - Intelligent transport systems - Cooperative ITS - Local dynamic maps (ISO 18750:2018)

Relations

• Replaces: CEN ISO/TS 18750:2015 - Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015)
• Effective Date: 20-Jun-2018
• Revised: prEN ISO 18750 - Intelligent transport systems - Local dynamic map (ISO/DIS 18750:2024)
• Effective Date: 15-Nov-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 18750:2015
,QWHOLJHQWQLWUDQVSRUWQLVLVWHPL.RRSHUDWLYQLVLVWHP/RNDOQLGLQDPLþQL
]HPOMHYLGL,62
Intelligent transport systems - Cooperative ITS - Local dynamic maps (ISO 18750:2018)
Intelligente Transportsysteme - Kooperative Systeme - Festlegung eines globalen
Konzeptes für lokale dynamische Karten (ISO 18750:2018)
Systèmes intelligents de transport - Systèmes ITS - Cartes dynamiques locales (ISO
18750:2018)
Ta slovenski standard je istoveten z: EN ISO 18750:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18750
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2018
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 18750:2015
English Version
Intelligent transport systems - Co-operative ITS - Local
dynamic map (ISO 18750:2018)
Systèmes de transport intelligents - Systèmes Intelligente Transportsysteme - Kooperative Systeme -
intelligents de transport coopératifs - État des Festlegung eines globalen Konzeptes für lokale
connaissances des cartes (ISO 18750:2018) dynamische Karten (ISO 18750:2018)
This European Standard was approved by CEN on 12 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18750:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18750:2018) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by December 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 18750:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18750:2018 has been approved by CEN as EN ISO 18750:2018 without any modification.

INTERNATIONAL ISO
STANDARD 18750
First edition
2018-05
Intelligent transport systems —
Co-operative ITS — Local dynamic
map
Systèmes de transport intelligents — Systèmes intelligents de
transport coopératifs — État des connaissances des cartes
Reference number
ISO 18750:2018(E)
©
ISO 2018
ISO 18750:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 18750:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Architectural environment . 4
5.1 Local Dynamic Map . 4
5.2 LDM in an ITS-S . 4
5.3 LDM in an ITS-SU . 5
5.4 LDM related processes . 7
5.4.1 Synchronization of LDMs . 7
5.4.2 Archiving of LDM Data Objects . 7
5.5 LDM for road safety and vehicle-to-vehicle applications . 7
5.6 Security perspective . 8
5.6.1 Authorised access to LDM . 8
5.6.2 Initialisation and installation of applications to the BSMD . 8
5.6.3 Privacy . 9
5.7 An LDM versus other similar functionalities in an ITS-SU . 9
6 Functionality . 9
6.1 Terms and conventions . 9
6.2 Structure of an LDM .11
6.3 LDM Data Storage .12
6.4 LDM services .14
6.4.1 Registration, deregistration, and revocation of ITS-S application processes .14
6.4.2 Security checking in access requests .14
6.4.3 Access request management .15
6.5 LDM maintenance . .17
6.5.1 LDM Area of Maintenance .17
6.5.2 Outdated data management .17
6.6 LDM knowledge base .17
6.6.1 Metadata .17
6.6.2 Utility functions .18
6.7 Interfaces .18
6.7.1 Types of interfaces .18
6.7.2 Parameters of interface functions .19
6.7.3 LDM application management interface .20
6.7.4 LDM data interface .22
6.7.5 Security interface .25
6.7.6 LDM management interface .26
6.7.7 Service access points .27
7 Procedures .30
7.1 LDM services .30
7.1.1 Registration, deregistration, and revocation of ITS-S application processes .30
7.1.2 Security checking in access requests .30
7.1.3 Access request management .30
7.1.4 Second level filtering .32
7.2 LDM maintenance . .
...