prEN ISO 16701
(Main)Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO/DIS 16701:2023)
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO/DIS 16701:2023)
ISO 16071:2015 specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h exposure to a slightly acidified solution of 1 % NaCl twice weekly, followed by a condition of controlled humidity cycling between 95 % RH and 50 % RH at a constant temperature of 35 °C.
It does not specify the dimensions of the tests specimens, the exposure period to be used for a particular product, or the interpretation of the results. Such details are provided in the appropriate product specifications.
The accelerated laboratory corrosion test applies to metals and their alloys, metallic coatings (anodic or cathodic), chemical conversion coatings, and organic coatings on metallic materials.
Korrosion von Metallen und Legierungen - Korrosion in künstlicher Atmosphäre - Beschleunigte Korrosionsprüfungen unter zyklischer Einwirkung von Luftfeuchte und intermittierendem Versprühen einer Salzlösung unter kontrollierten Bedingungen (ISO/DIS 16701:2023)
Corrosion des métaux et alliages - Corrosion en atmosphère artificielle - Essai de corrosion accélérée comprenant des expositions sous conditions contrôlées à des cycles d'humidité et à des vaporisations intermittentes de solution saline (ISO/DIS 16701:2023)
L'ISO 16701 :2015 spécifie la méthode d'essai, les réactifs et le mode opératoire à utiliser dans un essai de corrosion atmosphérique accélérée consistant en une exposition de 6 h, deux fois par semaine, à une solution légèrement acidifiée de 1 % de NaCl, suivie de cycles d'humidité contrôlés entre 95 % HR et 50 % de HR à une température constante de 35 °C.
La présente Norme internationale ne spécifie pas les dimensions des éprouvettes, la durée d'exposition à utiliser pour un produit donné, ni l'interprétation des résultats. De tels détails sont fournis dans les spécifications de produit appropriées.
L'essai de corrosion accélérée en laboratoire s'applique aux métaux et à leurs alliages, aux revêtements métalliques (anodiques ou cathodiques), aux revêtements de conversion chimique, et aux revêtements organiques sur des matériaux métalliques.
Korozija kovin in zlitin - Korozija v umetni atmosferi - Preskus pospešene korozije z izpostavljanjem nadzorovanim pogojem izmeničnega vlaženja in vmesnim pršenjem slanice (ISO/DIS 16701:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 16701:2023
01-december-2023
Korozija kovin in zlitin - Korozija v umetni atmosferi - Preskus pospešene korozije
z izpostavljanjem nadzorovanim pogojem izmeničnega vlaženja in vmesnim
pršenjem slanice (ISO/DIS 16701:2023)
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated
corrosion test involving exposure under controlled conditions of humidity cycling and
intermittent spraying of a salt solution (ISO/DIS 16701:2023)
Korrosion von Metallen und Legierungen - Korrosion in künstlicher Atmosphäre -
Beschleunigte Korrosionsprüfungen unter zyklischer Einwirkung von Luftfeuchte und
intermittierendem Versprühen einer Salzlösung unter kontrollierten Bedingungen
(ISO/DIS 16701:2023)
Corrosion des métaux et alliages - Corrosion en atmosphère artificielle - Essai de
corrosion accélérée comprenant des expositions sous conditions contrôlées à des cycles
d'humidité et à des vaporisations intermittentes de solution saline (ISO/DIS 16701:2023)
Ta slovenski standard je istoveten z: prEN ISO 16701
ICS:
77.060 Korozija kovin Corrosion of metals
oSIST prEN ISO 16701:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 16701:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 16701:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16701
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
2023-09-04 2023-11-27
Corrosion of metals and alloys — Corrosion in artificial
atmosphere — Accelerated corrosion test involving
exposure under controlled conditions of humidity cycling
and intermittent spraying of a salt solution
Corrosion des métaux et alliages — Corrosion en atmosphère artificielle — Essai de corrosion accélérée
comprenant des expositions sous conditions contrôlées à des cycles d'humidité et à des vaporisations
intermittentes de solution saline
ICS: 77.060
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16701:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 16701:2023
ISO/DIS 16701:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16701
ISO/TC 156 Secretariat: SAC
Voting begins on: Voting terminates on:
Corrosion of metals and alloys — Corrosion in artificial
atmosphere — Accelerated corrosion test involving
exposure under controlled conditions of humidity cycling
and intermittent spraying of a salt solution
Corrosion des métaux et alliages — Corrosion en atmosphère artificielle — Essai de corrosion accélérée
comprenant des expositions sous conditions contrôlées à des cycles d'humidité et à des vaporisations
intermittentes de solution saline
ICS: 77.060
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16701:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.