EN 1849-2:2019

Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing

This document specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Dieses Dokument legt Verfahren für die Bestimmung der Dicke und der flächenbezogenen Masse von Kunststoff- und Elastomerbahnen für Dachabdichtungen fest.

Feuilles souples d’étanchéité - Détermination de l’épaisseur et de la masse surfacique - Partie 2 : Feuilles d’étanchéité de toiture plastiques et élastomères

a présente Norme européenne spécifie des méthodes permettant de déterminer l’épaisseur et la masse surfacique de feuilles d’étanchéité de toiture plastiques et élastomères.

Hidroizolacijski trakovi - Določevanje debeline in mase na enoto površine - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metode za določevanje debeline in mase na enoto površine polimernih in elastomernih trakov za tesnjenje streh.

General Information

• Status: Published
• Publication Date: 09-Jul-2019
• Withdrawal Date: 30-Jan-2020
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/SC 2 - Synthetic sheets
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jul-2019
• Due Date: 22-Dec-2019
• Completion Date: 10-Jul-2019
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 1849-2:2019 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing

Relations

• Replaces: EN 1849-2:2009 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
• Effective Date: 15-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 1849-2:2010
Hidroizolacijski trakovi - Določevanje debeline in mase na enoto površine - 2. del:
Polimerni in elastomerni trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of thickness and mass per unit area -
Part 2: Plastics and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2:
Kunststof- und Elastomerbahnen für Dachabdichtungen
Feuilles souples d’étanchéité - Détermination de l’épaisseur et de la masse surfacique -
Partie 2 : Feuilles d’étanchéité de toiture plastiques et élastomères
Ta slovenski standard je istoveten z: EN 1849-2:2019
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1849-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 1849-2:2009
English Version
Flexible sheets for waterproofing - Determination of
thickness and mass per unit area - Part 2: Plastics and
rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de Abdichtungsbahnen - Bestimmung der Dicke und der
l'épaisseur et de la masse surfacique - Partie 2 : flächenbezogenen Masse - Teil 2: Kunststoff- und
Feuilles d'étanchéité de toiture plastiques et Elastomerbahnen für Dachabdichtungen
élastomères
This European Standard was approved by CEN on 22 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1849-2:2019 E
worldwide for CEN national Members.

Contents Page
European foreword. 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling . 7
5 Determination of thickness . 8
5.1 Principle . 8
5.2 Apparatus . 8
5.2.1 Mechanical measuring device . 8
5.2.2 Optical measuring device . 8
5.3 Test specimens . 8
5.4 Procedure . 9
5.4.1 Mechanical measurement . 9
5.4.2 Optical measurement . 10
5.5 Expression of results . 10
6 Determination of mass per unit area . 10
6.1 Principle . 10
6.2 Apparatus . 10
6.3 Test specimens . 10
6.4 Procedure . 10
6.5 Expression of results . 10
7 Test report . 10
Annex A (informative) Example of the cut cross-section of a fleece backed membrane . 12

European foreword
This document (EN 1849-2:2019) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1849-2:2009.
Compared with EN 1849-2:2009 the following changes have been made in EN 1849-2:2019:
— the "overall thickness" and "effective thickness" has been replaced by:
— mechanical effective thickness (d );
effm
— optical effective thickness (d );
effo
— mechanical overall thickness (d );
m
— optical overall thickness (d );
o
— Figure 1 and Figure 2 have been replaced by new Figure 1 a-d;
— Table 1 in 5.3 has been removed;
— Figure 3 has been updated;
— a new Figure 2 has been introduced in 5.2.1;
— Figure A.1 has been replaced by a new one.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

Introduction
This European Standard is intended for characterisation of plastic and rubber sheets as manufactured
or supplied before use. This test method relates exclusively to products or to their components where
appropriate, and not to waterproofing membrane systems composed of such products and installed in
the works.
This test is intended to be used in conjunction with European Standard "Definition and Characteristics"
for plastic and rubber sheets for roof waterproofing (EN 13956).
EN 18
...