EN ISO 14692-4:2017
(Main)Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017)
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017)
ISO 14692-4:2017 gives requirements and recommendations for the fabrication, installation, inspection and maintenance of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing, maintenance and repair.
It is intended to be read in conjunction with ISO 14692‑1.
Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunststoffrohrleitungen (GFK) - Teil 4: Fertigung, Installation und Betrieb (ISO 14692-4:2017)
Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre (PRV) - Partie 4: Construction, installation et mise en oeuvre (ISO 14692-4:2017)
ISO 14692-4:2017 spécifie les exigences et recommandations relatives à la fabrication, à l'installation, à l'inspection et à la maintenance des systèmes de tuyauteries en PRV destinés à être utilisés pour les applications de traitement et de fourniture de services généraux des industries du pétrole et du gaz. Les recommandations s'appliquent à la livraison, au contrôle, à la manutention, au stockage, à l'installation, aux essais de pression effectués sur le système, à la maintenance et à la réparation.
Le présent document est destiné à être lu de pair avec l'ISO 14692‑1.
Industrija za predelavo nafte in zemeljskega plina - S steklenimi vlakni ojačeni polimerni cevovodi (GRP) - 4. del: Izdelava, vgradnja in delovanje (ISO 14692-4:2017)
Ta dokument podaja zahteve in priporočila za izdelavo, vgradnjo, pregled in vzdrževanje s steklenimi vlakni ojačenih polimernih cevovodnih sistemov za uporabo v industriji za predelavo nafte in zemeljskega plina ter v okviru podpornih storitev. Priporočila se uporabljajo za dobavo, pregled, ravnanje, shranjevanje, vgradnjo, preskušanje tlaka sistema, vzdrževanje in popravilo.
Standard je treba uporabljati v povezavi s standardom ISO 14692-1.
General Information
Relations
Related Packages
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
1DGRPHãþD
SIST EN ISO 14692-4:2004
SIST EN ISO 14692-4:2004/AC:2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD6VWHNOHQLPLYODNQLRMDþHQL
SROLPHUQLFHYRYRGL *53 GHO ,]GHODYDYJUDGQMDLQGHORYDQMH ,62
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4:
Fabrication, installation and operation (ISO 14692-4:2017)
Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunststoffrohrleitungen (GFK) - Teil 4:
Fertigung, Installation und Betrieb (ISO 14692-4:2017)
Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre
(PRV) - Partie 4: Construction, installation et mise en œuvre (ISO 14692-4:2017)
Ta slovenski standard je istoveten z: EN ISO 14692-4:2017
ICS:
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
83.140.30 3ROLPHUQHFHYLLQILWLQJL]D Plastics pipes and fittings for
VQRYLNLQLVRWHNRþLQH non fluid use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 14692-4
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 75.200; 83.140.30 Supersedes EN ISO 14692-4:2002
English Version
Petroleum and natural gas industries - Glass-reinforced
plastics (GRP) piping - Part 4: Fabrication, installation and
operation (ISO 14692-4:2017)
Industries du pétrole et du gaz naturel - Canalisations Erdöl- und Erdgasindustrie - Glasfaserverstärkte
en plastique renforcé de verre (PRV) - Partie 4: Kunststoffrohrleitungen (GFK) - Teil 4: Fertigung,
Construction, installation, inspection et maintenance Installation und Betrieb (ISO 14692-4:2017)
(ISO 14692-4:2017)
This European Standard was approved by CEN on 22 June 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14692-4:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 14692-4:2017) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018 and conflicting national standards shall be
withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14692-4:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14692-4:2017 has been approved by CEN as EN ISO 14692-4:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 14692-4
Second edition
2017-08
Petroleum and natural gas
industries — Glass-reinforced plastics
(GRP) piping —
Part 4:
Fabrication, installation and operation
Industries du pétrole et du gaz naturel — Canalisations en plastique
renforcé de verre (PRV) —
Partie 4: Construction, installation et mise en œuvre
Reference number
ISO 14692-4:2017(E)
©
ISO 2017
ISO 14692-4:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 14692-4:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviated terms . 1
4 Fabrication and installation . 2
4.1 Delivery, inspection and documentation of GRP piping . 2
4.2 Handling and storage. 2
4.3 System design documentation. 2
4.4 Installer requirements . 3
4.4.1 Personnel qualification . 3
4.4.2 Health and safety . 3
4.5 Installation . 3
4.5.1 General requirements . 3
4.5.2 Components fabricated on-site . 4
4.5.3 Cutting . 4
4.5.4 Above ground application — Supports . 4
4.5.5 Buried piping . 5
4.5.6 Tolerances . 5
4.5.7 Jointing . 7
4.5.8 Application of fire-protective coating . 8
4.5.9 Electrical conductivity and electrostatic dissipative properties . 9
4.5.10 Earthing . 9
4.5.11 Quality programme for installation . 9
4.6 System testing .10
4.6.1 Flushing .10
4.6.2 Pressure testing .10
4.7 Certification and documentation .13
4.7.1 Flushing certificate .13
4.7.2 Pressure test certificate .13
4.8 Inspection .13
4.9 Repair after installation .13
4.9.1 General.13
4.9.2 Repair methods .13
5 Maintenance and repair .14
5.1 Maintenance .14
5.1.1 General.14
5.1.2 Removal of scale and blockages .14
5.1.3 Earthing requirements .14
5.1.4 Surface and mechanical damage .14
5.1.5 Fitter and inspector qualification .14
5.2 Repair .14
5.2.1 General.14
5.2.2 Replacement .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.