EN ISO 11393-2:2019
(Main)Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
This document specifies the performance requirements, test methods, design requirements, identification and marking information for leg protectors that offer protection against cutting by hand-held chainsaws.
Schutzkleidung für die Benutzer von handgeführten Kettensägen - Teil 2: Leistungsanforderungen und Prüfverfahren für Beinschützer (ISO 11393-2:2018)
Dieses Dokument legt die Leistungsanforderungen, Prüfverfahren, Gestaltungsanforderungen sowie Anforderungen zu Identifikation und Kennzeichnungsangaben für Beinschützer fest, die Schutz gegen Schnitte von handgeführten Kettensägen bieten.
Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main - Partie 2: Exigences de performance et méthodes d'essai pour protège-jambes (ISO 11393-2:2018)
Le présent document spécifie les exigences de performance, les méthodes d'essai, les exigences de conception, l'identification et les informations de marquage relatives aux protège-jambes qui offrent une protection contre les coupures dues aux scies à chaîne tenues à la main.
Varovalna obleka za uporabnike ročnih verižnih žag - 2. del: Zahtevane lastnosti in preskusne metode za ščitnike nog (ISO 11393-2:2018)
Ta del standarda ISO 11393 opredeljuje zasnovo ter določa zahteve in preskusne metode za ščitnike nog, ki zagotavljajo zaščito pred urezom z ročno verižno žago, vključno z zahtevami za opredelitev, označevanje in informiranje uporabnika.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN 381-2:1996
SIST EN 381-5:1996
Varovalna obleka za uporabnike ročnih verižnih žag - 2. del: Zahtevane lastnosti in
preskusne metode za ščitnike nog (ISO 11393-2:2018)
Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements
and test methods for leg protectors (ISO 11393-2:2018)
Schutzkleidung für die Benutzer von handgeführten Kettensägen - Teil 2:
Leistungsanforderungen und Prüfmethoden für Beinschützer (ISO 11393-2:2018)
Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main - Partie 2:
Exigences de performance et méthodes d'essai pour protège-jambes (ISO 11393-
2:2018)
Ta slovenski standard je istoveten z: EN ISO 11393-2:2019
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11393-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 13.340.10 Supersedes EN 381-2:1995, EN 381-5:1995
English Version
Protective clothing for users of hand-held chainsaws - Part
2: Performance requirements and test methods for leg
protectors (ISO 11393-2:2018)
Vêtements de protection pour utilisateurs de scies à Schutzkleidung für die Benutzer von handgeführten
chaîne tenues à la main - Partie 2: Exigences de Kettensägen - Teil 2: Leistungsanforderungen und
performance et méthodes d'essai pour protège-jambes Prüfmethoden für Beinschützer (ISO 11393-2:2018)
(ISO 11393-2:2018)
This European Standard was approved by CEN on 24 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11393-2:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of REGULATION (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 4
European foreword
This document (EN ISO 11393-2:2019) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 381-2:1995 and EN 381-5:1995.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11393-2:2018 has been approved by CEN as EN ISO 11393-2:2019 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of REGULATION (EU) 2016/425 of the European Parliament
and of the Council of 9 March 2016 on personal protective equipment aimed
to be covered
This European Standard has been prepared under a Commission’s standardization request to provide
one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the
European Parliament and of the Council of 9 March 2016 on personal protective equipment.
Once this standard is cited in the Official Journal of the European Union under that Regulation (EU)
2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers, within
the limits of the scope of this standard, a presumption of conformity with the corresponding essential
requirements of that Regulation (EU) 2016/425 and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425
Essential Requirements of Clause(s)/sub-
Remarks/Notes
Regulation (EU) 2016/425 clause(s) of this EN
1.1.1. Ergonomics 4.4; 4.8.2
1.1.2.1. Optimum level of protection 4.4; 4.8.2
1.1.2.2. Classes of protection
4.7.1
appropriate to different levels of risk
1.2.1. Absence of inherent risks and
4.4; 4.5; 4.6; 4.8.2
other nuisance factors
1.2.1.1. Suitable constituent
4.2
materials
1.2.1.2 Satisfactory surface condition
of all PPE parts in contact with the 4.4
user
1.2.1.3 Maximum permissible user
4.4
impediment
1.3.1. Adaptation of PPE to user
4.4; 4.8.2
morphology
1.3.2. Lightness and strength 4.8.
1.4. Manufacturer’s instructions and
9; 7.
information
2.1 PPE incorporating adjustment
4.4; 4.8.2
systems
2.4. PPE subject to ageing 9
2.12. PPE bearing one or more
identification markings or indicators
8.
directly or indirectly relating to
health and safety
3.3. Protection against mechanical
4.7.2
injuries
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 11393-2
Second edition
2018-09
Protective clothing for users of hand-
held chainsaws —
Part 2:
Performance requirements and test
methods for leg protectors
Vêtements de protection pour utilisateurs de scies à chaîne tenues à
la main —
Partie 2: Exigences de performance et méthodes d'essai pour
protège-jambes
Reference number
ISO 11393-2:2018(E)
©
ISO 2018
ISO 11393-2:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 11393-2:2018(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 3
4.1 General . 3
4.2 Innocuousness . 3
4.3 Sizing . 3
4.4 Ergonomics . 3
4.5 Dimensional and other changes . 4
4.5.1 Dimensional change . 4
4.5.2 Other changes as a consequence of cleaning . 4
4.6 Protective coverage . 4
4.6.1 General designs of leg protectors . 4
4.6.2 Design A . 5
4.6.3 Design B (chaps) . 7
4.6.4 Design C . 9
4.7 Resistance to cutting by a chainsaw .10
4.7.1 Classification according to chain speed .10
4.7.2 Requirements for cut resistance .10
4.8 Requirements for strength of attachment of protective insert of trousers, chaps
and strap attachment for chaps .10
4.8.1 Trousers and leggings .10
4.8.2 Chaps .11
5 Test specimens for cut testing .11
6 Test methods .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.