EN 15613:2008

Knee and elbow protectors for indoor sports - Safety requirements and test methods

This European Standard specifies the requirements and test methods for ergonomics, sizing, adjust/restraint performance and impact performance of knee and elbow protectors used for indoor sports, e.g. volleyball and handball.
It applies for knee and elbow protectors to be used on smooth and level floors without mats.

Knie- und Ellbogenschützer für den Hallensport - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Ergonomie,
Größenangaben, Verstell-/Befestigungssysteme und Stoßdämpfung für Knie- und Ellbogenschützer fest, die
bei der Ausübung von Ballsportarten in Sporthallen, wie z. B. Volleyball und Handball, verwendet werden.
Die Norm gilt für Knie- und Ellbogenschützer zur Benutzung auf glatten, ebenen Böden ohne Matten.

Protecteurs de genoux et de coudes pour les sports de salle - Exigences de sécurité et méthodes d'essai

La présente Norme européenne spécifie les exigences et méthodes d’essai relatives à l’ergonomie, à la taille,
à la performance du réglage et de la retenue ainsi qu’à la performance au choc des protecteurs de genoux et
de coudes utilisés pour les sports de salle, par exemple le volley-ball et le handball.
Elle s’applique aux protecteurs de genoux et de coudes destinés à être utilisés sur des sols lisses, sans tapis.

Ščitniki kolen in komolcev za dvoranske športne dejavnosti - Varnostne zahteve in preskusne metode

General Information

• Status: Published
• Publication Date: 14-Oct-2008
• ICS: 13.340.40 - Hand and arm protection
• ICS: 13.340.50 - Leg and foot protection
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162/WG 11 - Body protection for sports
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jul-2024
• Completion Date: 15-Jul-2024
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 15613:2008 - Knee and elbow protectors for indoor sports - Safety requirements and test methods

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Knie- und Ellbogenschützer für den Hallensport - Sicherheitstechnische Anforderungen und PrüfverfahrenProtecteurs de genoux et de coudes pour les sports de salle - Exigences de sécurité et méthodes d'essaiKnee and elbow protectors for indoor sports - Safety requirements and test methods97.220.30Oprema za dvoranske športeIndoor sports equipment13.340.50Varovanje nog in stopalLeg and foot protection13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 15613:2008SIST EN 15613:2008en,fr,de01-december-2008SIST EN 15613:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15613October 2008ICS 13.340.40; 13.340.50 English VersionKnee and elbow protectors for indoor sports - Safetyrequirements and test methodsProtecteurs de genoux et de coudes pour les sports desalle - Exigences de sécurité et méthodes d'essaiKnie- und Ellbogenschützer für den Hallensport -Sicherheitstechnische Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15613:2008: ESIST EN 15613:2008

Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC.11 Bibliography.12
5.5 Impact performance When tested according to 6.6, all test results shall not exceed the values specified in Table 2. SIST EN 15613:2008

Protector mm J Mm J kN Elbow protector 12,5
1 17,5
1,5 4 Knee protector 25,0
2,5 35,0
4 6 r is the radius of curvature of the anvil E is the impact energy
See test method in 6.6. 6 Test methods 6.1 General If no specific methods are specified compliance with the requirements of this European Standard shall be exam-ined by measurement, visual inspection and tactile examination. For the tests new protectors shall be used. Measuring instruments unless otherwise specified shall be accurate to ± 2 % of the pass/fail level of the charac-teristic being measured. For each of the required sequences of measurements performed in accordance with this European Standard a corresponding estimate of the uncertainty of the final result shall be determined. The uncertainty of measure-ment shall be expressed in the form ± X. It shall be used in determining whether a "Pass" performance has been achieved. If the final result minus X is below the pass level when the requirement, that a certain value shall be exceeded, the sample shall be deemed to have failed. NOTE It is anticipated that values of uncertainty of measurement will be usually between 2 % and 5 % of the measured value for force and length measurements. 6.2 Sampling and conditioning of the test samples Two pairs of protectors of each size manufactured shall be provided for testing. Where only one size of a protector is manufactured 4 pairs of that protector shall be provided for testing. The test samples shall be supplied to the test house with the information regarding the body dimensions of the intended user. Before testing, all protectors shall be cleaned 3 times according to the information supplied by the manufacturer. This shall be recorded in the test report. The test samples shall be conditioned for at least 24 h at an atmosphere with a temperature of (20 ± 2) °C and a relative humidity of (65 ± 5) %. Testing shall be carried out in the conditioning environment or within 10 min of removal from the environment. SIST EN 15613:2008
...