EN ISO 11990-2:2010
(Main)Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010)
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010)
ISO 11990‑2:2010 specifies a method of testing the continuous wave (cw) resistance of the cuff regions of tracheal tubes designed to resist ignition by a laser. Other components of the system, such as the inflation system and shaft are outside the scope of ISO 11990‑2:2010.
Laser und Laseranlagen - Bestimmung der Laserresistenz von Trachealtuben - Teil 2: Trachealtubusmanschetten (ISO 11990-2:2010)
Dieser Teil von ISO 11990 legt ein Verfahren zur Prüfung der Dauerstrichlaserresistenz (cw-Laser) des
Manschettenbereichs (Cuffbereichs) eines Trachealtubus fest, der dafür ausgelegt ist, der Entzündung durch
einen Laser standzuhalten. Andere Komponenten des Systems, wie das Aufblassystem und der Schaft (wie in
ISO 11990-1 festgelegt), gehören nicht zum Anwendungsbereich dieses Teils von ISO 11990.
ANMERKUNG 1 Das Verfahren zur Prüfung der Laserresistenz des Trachealtubusschaftes gehört zum
Anwendungsbereich der ISO 11990-1.
Das festgelegte Prüfverfahren kann angewendet werden, um die Eigenschaften von Materialien, Produkten
oder Montageeinheiten als Reaktion auf die Einwirkung von Hitze und Flammen unter kontrollierten Laborbedingungen
zu beschreiben. Es beschreibt oder beurteilt nicht die Feuergefahr oder das Brandrisiko von
Materialien, Produkten und Montageeinheiten unter realen klinischen Einsatzbedingungen. Die Ergebnisse
dieser Prüfung dürfen jedoch im Rahmen einer Beurteilung des Brandrisikos berücksichtigt werden, die all
jene Faktoren einbezieht, die zur Bestimmung der Gefährdung einer besonderen Endnutzung gehören.
ANMERKUNG 2 Die Interpretation dieser Ergebnisse sollte mit Umsicht erfolgen, weil die direkte Übertragbarkeit von
Ergebnissen dieses Prüfverfahrens auf die klinische Situation nicht immer gegeben ist.
ANMERKUNG 3 Dieses Prüfverfahren kann die Anwendung von gefährlichen Materialien, Handhabungen und
Ausrüstungsgegenständen umfassen. Dieser Teil von ISO 11990 gibt Hinweise zur Minimierung von Risiken, erhebt aber
nicht den Anspruch, alle Sicherheitsprobleme, die sich mit deren Anwendung ergeben, anzusprechen. Es liegt in der
Verantwortung des Anwenders dieses Prüfverfahrens, die geeigneten praktischen Maßnahmen bezüglich Gesundheitsund
Arbeitsschutz festzulegen und die Anwendbarkeit von behördlichen Beschränkungen zu bestimmen.
Lasers et équipements associés aux lasers - Détermination de la résistance au laser des tubes trachéaux - Partie 2: Ballonnet de tubes trachéaux (ISO 11990-2:2010)
L'ISO 11990-2:2010 spécifie une méthode d'essai de la résistance à un laser fonctionnant en régime continu des régions du ballonnet de tubes trachéaux conçus pour résister à l'ignition par un laser. Les autres composants du système, comme le système de gonflage et le tube proprement dit, n'entrent pas dans le domaine d'application de l'ISO 11990-2:2010.
Laserji in laserska oprema - Ugotavljanje odpornosti sapničnih (endotrahealnih) tubusov proti laserskemu žarku - 2. del: Sapnični (endotrahealni) tubusi (ISO 11990-2:2010)
Ta del ISO 11990 določa metodo preskušanja odpornosti proti trajnemu valovanju manšentnih predelov sapničnih tubusov, odpornih proti vžigu z laserjem. Drugi sestavni deli sistema, kot sta sistem za napihovanje in os (kot opredeljuje ISO 11990-1), so zunaj področja uporabe tega dela ISO 11990. Določene preskusne metode se lahko uporabljajo za merjenje in opis lastnosti materialov, proizvodov ali sklopov kot odziv na vročino in ogenj pod nadzorovanimi laboratorijskimi pogoji. Ne opisuje in ne ocenjuje požarne nevarnosti ali tveganja materialov, proizvodov ali sklopov v dejanskih okoliščinah klinične uporabe. Rezultati te preskusne metode pa se lahko uporabijo kot element ocene požarnega tveganja, ki upošteva vse dejavnike, kateri se nanašajo na oceno nevarnosti pri določeni končni uporabi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11990-2:2010
01-oktober-2010
/DVHUMLLQODVHUVNDRSUHPD8JRWDYOMDQMHRGSRUQRVWLVDSQLþQLK HQGRWUDKHDOQLK
WXEXVRYSURWLODVHUVNHPXåDUNXGHO 6DSQLþQL HQGRWUDKHDOQL WXEXVL ,62
Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes
- Part 2: Tracheal tube cuffs (ISO 11990-2:2010)
Laser und Laseranlagen - Bestimmung der Laserresistenz von Trachealtuben - Teil 2:
Trachealtubusmanschetten (ISO 11990-2:2010)
Lasers et équipements associés aux lasers - Détermination de la résistance au laser des
tubes trachéaux - Partie 2: Ballonnet de tubes trachéaux (ISO 11990-2:2010)
Ta slovenski standard je istoveten z: EN ISO 11990-2:2010
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11990-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11990-2:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 11990-2:2010
EUROPEAN STANDARD
EN ISO 11990-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 11.040.10; 31.260
English Version
Lasers and laser-related equipment - Determination of laser
resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO
11990-2:2010)
Lasers et équipements associés aux lasers - Détermination Laser und Laseranlagen - Bestimmung der Laserresistenz
de la résistance au laser des tubes trachéaux - Partie 2: von Trachealtuben - Teil 2: Trachealtubusmanschetten
Ballonnet de tubes trachéaux (ISO 11990-2:2010) (ISO 11990-2:2010)
This European Standard was approved by CEN on 23 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11990-2:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11990-2:2010
EN ISO 11990-2:2010 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC .4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11990-2:2010
EN ISO 11990-2:2010 (E)
Foreword
This document (EN ISO 11990-2:2010) has been prepared by Technical Committee ISO/TC 172 "Optics and
photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria,
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QGRWUDKHDOQLKLaser und Laseranlagen - Bestimmung der Laserresistenz von Trachealtuben - Teil 2: Trachealtubusmanschetten (ISO/DIS 11990-2:2008)Lasers et équipements associés aux lasers - Détermination de la résistance au laser des tubes trachéaux - Partie 2: Ballonnet de tubes trachéaux (ISO/DIS 11990-2:2008)Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO/DIS 11990-2:2008)31.260Optoelektronika, laserska opremaOptoelectronics. Laser equipment11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:prEN ISO 11990-2oSIST prEN ISO 11990-2:2009en01-marec-2009oSIST prEN ISO 11990-2:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMDRAFTprEN ISO 11990-2October 2008ICS 11.040.10; 31.260 English VersionLasers and laser-related equipment - Determination of laserresistance of tracheal tubes - Part 2: Tracheal tube cuffs(ISO/DIS 11990-2:2008)Lasers et équipements associés aux lasers - Déterminationde la résistance au laser des tubes trachéaux - Partie 2:Ballonnet de tubes trachéaux (ISO/DIS 11990-2:2008)Laser und Laseranlagen - Bestimmung der Laserresistenzvon Trachealtuben - Teil 2: Trachealtubusmanschetten(ISO/DIS 11990-2:2008)This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical CommitteeCEN/TC 123.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and toprovide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN ISO 11990-2:2008: E
prEN ISO 11990-2:2008 (E) 2 Contents Page Foreword.3
prEN ISO 11990-2:2008 (E) 3 Foreword This document (prEN ISO 11990-2:2008) has been prepared by Technical Committee ISO/TC 172 "Optics and optical instruments" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by DIN. This document is currently submitted to the parallel Enquiry. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). Endorsement notice The text of ISO/DIS 11990-2:2008 has been approved by CEN as a prEN ISO 11990-2:2008 without any modification.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BEREFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFTINTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TOWHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICHTHEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.DRAFT INTERNATIONAL STANDARDISO/DIS11990-2© International Organization for Standardization,2008INTERNATIONALORGANIZATIONFORSTANDARDIZATION••ORGANISATIONINTERNATIONALEDENORMALISATIONISO/TC172/SC9Voting begins on:2008-10-02Secretariat: DINVoting terminates on:2009-03-02Lasers and laser-related equipment— Determination of laser resistance of tracheal tubes—Part2:Tracheal
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.