EN 13445-3:2014/A8:2019

Unfired pressure vessels - Part 3: Design

Revision of clause 16, 22 and annex W

Unbefeuerte Druckbehälter - Teil 3: Konstruktion

Récipients sous pression non soumis à la flamme - Partie 3 : Conception

Neogrevane (nekurjene) tlačne posode - 3. del: Konstruiranje - Dopolnilo A8

General Information

• Status: Withdrawn
• Publication Date: 02-Apr-2019
• Withdrawal Date: 11-May-2021
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 53 - C - Design methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-May-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-3:2014/A8:2019 - Unfired pressure vessels - Part 3: Design

Relations

• Replaced By: EN 13445-3:2021 - Unfired pressure vessels - Part 3: Design
• Effective Date: 08-Jun-2022
• Amends: EN 13445-3:2014 - Unfired pressure vessels - Part 3: Design
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-3:2014/A8:2019
01-maj-2019
1HRJUHYDQHQHNXUMHQHWODþQHSRVRGHGHO.RQVWUXLUDQMH'RSROQLOR$
Unfired pressure vessels - Part 3: Design
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Récipients sous pression non soumis à la flamme - Partie 3 : Conception
Ta slovenski standard je istoveten z: EN 13445-3:2014/A8:2019
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
SIST EN 13445-3:2014/A8:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-3:2014/A8:2019

---------------------- Page: 2 ----------------------

SIST EN 13445-3:2014/A8:2019


EN 13445-3:2014/A8
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 23.020.30
English Version

Unfired pressure vessels - Part 3: Design
Récipients sous pression non soumis à la flamme - Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Partie 3 : Conception
This amendment A8 modifies the European Standard EN 13445-3:2014; it was approved by CEN on 19 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-3:2014/A8:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-3:2014/A8:2019
EN 13445-3:2014/A8:2019 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 2, Normative references . 4
2 Modification to 5.3.1, Actions . 4
3 Addition of a new Subclause 5.3.2.4, Load combinations . 4
4 Addition of a new Subclause 6.7, Nominal design stress of anchor bolting . 8
5 Modifications to 8.4, General . 8
6 Modification to Subclause 16.4, Local loads on nozzles in spherical shells . 8
7 Modification to 16.5, Local loads on nozzles in cylindrical shells . 18
8 Modification to 16.6.6, Bending Limit Stress . 27
9 Modification to 16.7.2, Specific symbols and abbreviations . 28
10 Modification to 16.7.4, Applied force . 29
11 Modification to 16.7.5, Load limits for shell . 29
12 Modification to 16.8.6.2, Vessel under external pressure . 29
13 Modification to 16.8.7, Load limit at the saddle (without a reinforcing plate) . 29
14 Modification to 16.12.4.1, Specific symbols and abbreviations . 29
15 Modification to 16.12.4.3, Check of the skirt in regions with openings . 29
16 Modification to 16.12.5.1, Specific symbols and abbreviations . 30
17 Modifications to 16.12.5.2, Anchor bolt and concrete forces .
...