EN 3645-001:2007

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification

This standard specifies the general characteristics, the conditions for qualification, acceptance and quality as-surance, as well as the test programs and groups for threaded ring coupling circular connectors, fire-resistant, intended for use in a temperature range from  65 °C to 175 °C continuous or 200 °C continuous according to the classes and models.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 001: Technische Lieferbedingungen

Diese Norm legt die allgemeinen Eigenschaften, die Bedingungen für Qualifikation, Abnahme und Qualitäts¬sicherung, sowie die Prüfprogramme und -gruppen für Rundsteckverbinder mit Gewinde-Schnellkupplung, feuerbeständig, die für einen Temperaturbereich von  -65 °C bis 175 °C konstant oder 200 °C konstant, entsprechend der Klassen und Bauformen, vorgesehen sind.

Série aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 001 : Spécification technique

Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z navojem, stalna delovna temperatura 175 °C ali 200 °C - 001. del: Tehnična specifikacija

General Information

• Status: Withdrawn
• Publication Date: 27-Mar-2007
• Withdrawal Date: 29-Jan-2013
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Jan-2013
• Completion Date: 30-Jan-2013
• Ref Project: SIST EN 3645-001:2009 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification

Relations

• Replaced By: EN 3645-001:2013 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
• Effective Date: 06-Feb-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 001 : Spécification techniqueAerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3645-001:2007SIST EN 3645-001:2009en,de01-maj-2009SIST EN 3645-001:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3645-001
March 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
Série aérospatiale - Connecteurs électriques circulaires à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 001 : Spécification technique
Luft- und Raumfahrt - Elektrische Rundsteckverbinder,kontaktgeschützt, Drai-gängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 001: Technische LieferbedingungenThis European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-001:2007: ESIST EN 3645-001:2009

1) In preparation at the date of publication of this standard. SIST EN 3645-001:2009

For arrangements comprising the letter G, all contacts are grounded to the receptacle housingThe receptacles and plugs contain either male contacts or female contacts. The contacts fitted in the model Y receptacles are exclusively of the male solder type.
2) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. 3) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. 4) Published as ASD Technical Report at the date of publication of this standard. SIST EN 3645-001:2009

5 Design 5.1 Housings The connector housings shall be one-piece. They shall contain teeth at the rear over their entire periphery and shall accommodate the rear accessories. The receptacle shall be fitted with a seal for sealing the coupled housings. Jam nut receptacles shall contain an O-ring seal. The nut shall have holes for the passage of locking wire. During coupling the grounding spring shall be engaged a minimum of 1,02 mm in the receptacle before the contacts engage. Except for the triple start threads, which shall conform to standard MIL-STD-1373, threads shall conform to standards ISO 68-1, ISO 261, ISO 262 and ISO 965-2. The coupling ring shall be designed so that the male and female contacts engage when it is turned in a clock-wise direction and disengage when turned anticlockwise. The coupling threads may have a lubricant applied during manufacture. Full locking of the connectors shall occur at about 360°. On completion of tightening of the coupling ring, me-chanical contact shall exist between the receptacle and plug housings. Masking of a red colour band on the receptacle by the coupling nut shall show that the connectors are correctly coupled. The receptacle has five keyways which engage with corresponding keys on the plug. The m
...