EN 12413:1999
(Main)Safety requirements for bonded abrasive products
Safety requirements for bonded abrasive products
This standard is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the grinding tools. This standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer. The hazards taken into consideration are listed in clause 4 of this standard.
Sicherheitsanforderungen für Schleifkörper aus gebundenem Schleifmittel
Diese Norm gilt für rotierende Schleifkörper aus gebundenem Schleifmittel. Sie legt Anforderungen und/oder Maßnahmen zur Beseitigung oder Verringerung von Gefährdungen fest, die von der Gestaltung und Anwendung der Schleifwerkzeuge herrühren. Diese Norm umfaßt auch Verfahren und Prüfungen zur Festellung der Übereinstimmung mit den Anforderungen sowie Benutzerinformationen, die der Hersteller dem Anwender zur Verfügung zu stellen hat. Die berücksichtigten Gefährdungen sind in Abschnitt 4 dieser Norm aufgeführt.
Exigences de sécurité pour les produits abrasifs agglomérés
Cette norme s'applique aux produits abrasifs agglomérés rotatifs. Elle spécifie les exigences et/ou moyens pour la suppression ou la réduction des risques résultants de la conception et de l'application des outils abrasifs. Cette norme contient également les procédures et essais pour la vérification de la conformité avec les exigences ainsi que des informations de sécurité pour l' utilisation. Les phénomènes dangereux à prendre en considération sont listés à l'article 4 de la présente norme.
Safety requirements for bonded abrasive products
General Information
Relations
Frequently Asked Questions
EN 12413:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety requirements for bonded abrasive products". This standard covers: This standard is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the grinding tools. This standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer. The hazards taken into consideration are listed in clause 4 of this standard.
This standard is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the grinding tools. This standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer. The hazards taken into consideration are listed in clause 4 of this standard.
EN 12413:1999 is classified under the following ICS (International Classification for Standards) categories: 25.100.70 - Abrasives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12413:1999 has the following relationships with other standards: It is inter standard links to EN 12413:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12413:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12413:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
Safety requirements for bonded abrasive products
Safety requirements for bonded abrasive products
Sicherheitsanforderungen für Schleifkörper aus gebundenem Schleifmittel
Exigences de sécurité pour les produits abrasifs aggl
...
記事タイトル：EN 12413：1999 - 結合研削製品の安全要件 記事内容：この規格は回転する結合研削製品に適用されます。研削ツールの設計と使用に起因する危険性の除去または軽減のための要件と/または対策を明示しています。また、この規格には要件の遵守を検証するための手順やテスト、製造業者がユーザーに提供する利用のための安全情報も含まれています。考慮される危険は、この規格の4項にリストされています。
The article discusses the EN 12413:1999 standard, which focuses on safety requirements for bonded abrasive products that rotate. It outlines measures to address hazards associated with the design and use of grinding tools. The standard includes procedures and tests to ensure compliance with these requirements, as well as safety information that manufacturers should provide to users. The hazards considered are detailed in clause 4 of the standard.
기사 제목: EN 12413:1999 - 접착제 연마제품에 대한 안전 요구 사항 기사 내용: 이 표준은 회전하는 접착제 연마 제품에 적용됩니다. 그는 연마 도구의 설계 및 적용으로 인한 위험을 제거하거나 줄이기 위한 요구 사항과/또는 조치를 명시합니다. 또한, 이 표준에는 요구 사항을 준수하는 검증 절차와 시험, 제조업자가 사용자에게 제공해야 하는 사용에 대한 안전 정보도 포함되어 있습니다. 고려되는 위험은 이 표준의 4조에 명시되어 있습니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...