CEN/TS 14418:2005

Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers

This Technical Specification specifies an index test to determine the influence ratio of freezing-thawing cycles on the flux through saturated clay geosynthetic barriers.
This test is applicable to clay geosynthetic barrier products with a geotextile backing. It is not necessarily applicable to clay geosynthetic barrier products with a geomembrane backing.

Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von Frost-Tau-Wechselbeanspruchungen auf die Durchlässigkeit von geosynthetischen Tondichtungsbahnen

Dieses Dokument legt ein Indexprüfverfahren zur Bestimmung des Einflussverhältnisses von Frost-Tau-Wechselbeanspruchungen auf den Durchfluss durch gesättigte geosynthetische Tondichtungsbahnen fest.
Diese Prüfung ist auf Produkte geosynthetischer Tondichtungsbahnen mit geotextiler Trägerschicht anwendbar. Sie notwendigerweise nicht anwendbar auf Produkte geosynthetischer Tondichtungsbahnen mit einer Geomembranträgerschicht.

Barrières géosynthétiques - Méthode d'essai pour la détermination de l'influence de cycles de gelée-dégel sur la perméabilité à l'eau des barrières géosynthétiques bentonitiques

Geosintetične ovire – Preskusna metoda za ugotavljanje vpliva ciklusov zamrzovanja-odtajanja na prepustnost geosintetičnih bentonitnih ovir

General Information

• Status: Withdrawn
• Publication Date: 20-Dec-2005
• Withdrawal Date: 14-Oct-2014
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 5 - Durability
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Oct-2014
• Ref Project: SIST-TS CEN/TS 14418:2006 - Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers

Relations

• Replaced By: CEN/TS 14418:2014 - Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14418:2006
01-marec-2006
*HRVLQWHWLþQHRYLUH±3UHVNXVQDPHWRGD]DXJRWDYOMDQMHYSOLYDFLNOXVRY
]DPU]RYDQMDRGWDMDQMDQDSUHSXVWQRVWJHRVLQWHWLþQLKEHQWRQLWQLKRYLU
Geosynthetic barriers - Test method for the determination of the influence of freezing-
thawing cycles on the permeability of clay geosynthetic barriers
Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von
Frost-Tau-Wechselbeanspruchungen auf die Durchlässigkeit von geosynthetischen
Tondichtungsbahnen
Barrieres géosynthétiques - Méthode d'essai pour la détermination de l'influence de
cycles de gelée-dégel sur la perméabilité a l'eau des barrieres géosynthétiques
bentonitiques
Ta slovenski standard je istoveten z: CEN/TS 14418:2005
ICS:
59.080.70 Geotekstilije Geotextiles
SIST-TS CEN/TS 14418:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14418:2006

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14418:2006
TECHNICAL SPECIFICATION
CEN/TS 14418
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2005
ICS 59.080.70

English Version
Geosynthetic barriers - Test method for the determination of the
influence of freezing-thawing cycles on the permeability of clay
geosynthetic barriers
Barrières géosynthétiques - Méthode d'essai pour la Geosynthetische Dichtungsbahnen - Prüfverfahren zur
détermination de l'influence de cycles de gelée-dégel sur la Bestimmung des Einflusses von Frost-Tau-
perméabilité à l'eau des barrières géosynthétiques Wechselbeanspruchungen auf die Durchlässigkeit von
bentonitiques geosynthetischen Tondichtungsbahnen
This Technical Specification (CEN/TS) was approved by CEN on 3 April 2005 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 14418:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14418:2006
CEN/TS 14418:2005 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Principle.5
5 Reagent.5
6 Apparatus .6
7 Procedure .8
8 Calculation and expression of results.10
9 Test report .11
Bibliography.
...