iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TS 17892-10:2004/AC:2005

(Corrigendum)

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

AFNOR - Modification to French title

Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 10: Direkte Scherversuche (ISO/TS 17892-10:2004)

Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 10: Essais de cisaillement direct (ISO/TS 17892-10:2004)

Geotehnično preiskovanje in preskušanje - Laboratorijsko preskušanje zemljin - 10. del: Neposredni strižni preskus (ISO/TS 17892-10:2004)

Ta dokument določa laboratorijske preskusne metode za ugotavljanje parametra efektivne strižne trdnosti za zemljine v okviru geotehničnih preiskav v skladu s prEN 1997-1 in -2. Preskusna metoda je sestavljena iz namestitve preskusnega vzorca v neposredni strižni pripomoček, vnosa vnaprej določene normalne napetosti, zagotavljanja drenaže (in po potrebi močenja) preskusnega vzorca ali obojega, utrditve vzorca pod normalno napetostjo, odklepanja okvira, ki drži vzorec, in premikanja enega okvira v vodoravni smeri glede na drugega s stalno hitrostjo strižne deformacije ter merjenja strižne sile in vodoravne premestitve ob striženju vzorca.  Striženje poteka dovolj počasi, da odvečni porni tlak izginja z drenažo in da so efektivne napetosti enake skupnim napetostim. Neposredni strižni preskusi se uporabljajo pri zemeljskih delih in temeljenju za določevanje efektivne strižne trdnosti zemljin.

General Information

Status
Withdrawn
Publication Date
20-Dec-2005
Withdrawal Date
18-Dec-2018
ICS
13.080.20 - Physical properties of soils
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
CEN/TC 341 - Geotechnical Investigation and Testing
Drafting Committee
CEN/TC 341 - Geotechnical Investigation and Testing
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
19-Dec-2018
Ref Project
SIST-TS CEN ISO/TS 17892-10:2004/AC:2010 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

Relations

Replaced By
EN ISO 17892-10:2018 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
Effective Date
26-Dec-2018
Corrects
CEN ISO/TS 17892-10:2004 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)
Effective Date
08-Jun-2022

Buy Standard

TS CEN ISO/TS 17892-10:2004/AC:2010TS CEN ISO/TS 17892-10:2004/AC:2010
PreviousNext
Corrigendum
TS CEN ISO/TS 17892-10:2004/AC:2010
French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 10: Direkte Scherversuche (ISO/TS 17892-10:2004)Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 10: Essais de cisaillement direct (ISO/TS 17892-10:2004)Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works13.080.20Fizikalne lastnosti talPhysical properties of soilsICS:Ta slovenski standard je istoveten z:CEN ISO/TS 17892-10:2004/AC:2005SIST-TS CEN ISO/TS 17892-10:2004/AC:2010fr01-april-2010SIST-TS CEN ISO/TS 17892-10:2004/AC:2010SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMCEN ISO/TS 17892-10:2004/ACDecember 2005Décembre 2005Dezember 2005ICS 13.080.20; 93.020English versionVersion FrançaiseDeutsche FassungGeotechnical investigation and testing - Laboratory testing of soil - Part 10:Direct shear tests (ISO/TS 17892-10:2004)Reconnaissance et essais géotechniques -Essais de laboratoire sur les sols - Partie10: Essais de cisaillement direct (ISO/TS17892-10:2004)Geotec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 17892-1:2014/A1:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)
SIST EN ISO 17892-1:2015/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018/A2:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2 (ISO 17892-12:2018/Amd 2:2022)
SIST EN ISO 17892-12:2018/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018/A1:2021(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 1 (ISO 17892-12:2018/Amd 1:2021)
SIST EN ISO 17892-12:2018/A1:2021

This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE The fall cone method in this document should not be confused with that of ISO 17892‑6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-4:2020(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers (ISO 18674-4:2020)
SIST EN ISO 18674-4:2020

This document specifies the measurement of pore water pressures and piezometric levels in saturated ground by means of piezometers installed for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674‑1.
If applied in conjunction with ISO 18674-5, the procedures described in this document allow the determination of effective stresses acting in the ground.
This document is applicable to:
—     monitoring of water pressures acting on and in geotechnical structures (e.g. quay walls, dikes, excavation walls, foundations, dams, tunnels, slopes, embankments, etc.);
—     monitoring of consolidation processes of soil and fill (e.g. beneath foundations and in embankments);
—     evaluating stability and serviceability of geotechnical structures;
—     checking geotechnical designs in connection with the Observational Design procedure.
NOTE    This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of piezometers, installed as part of the geotechnical investigation and testing in accordance with References [4] and [5] This document relates to measuring devices, which are installed in the ground. For pore water pressure measurements carried out in connection with cone penetration tests, see ISO 22476-1.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-3:2017/A1:2020(Amendment)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1 (ISO 18674-3:2017/Amd 1:2020)
SIST EN ISO 18674-3:2018/A1:2020
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-5:2019(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) (ISO 18674-5:2019)
SIST EN ISO 18674-5:2019

This document specifies the measurement of stress changes by means of total pressure cells (TPC). General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674‑1.
If applied in conjunction with ISO 18674‑4, this document allows the determination of effective stress acting in the ground.
This document is applicable to:
—          monitoring changes of the state of stress in the ground and in geo-engineered structures (e.g. in earth fill dams or tunnel lining);
—          monitoring contact pressures at the interface between two media (e.g. earth pressure on retaining wall; contact pressure at the base of a foundation);
—          checking geotechnical designs and adjustment of construction in connection with the Observational Design procedure;
—          evaluating stability during or after construction.
Guidelines for the application of TPC in geotechnical engineering are presented in Annex B.
NOTE       This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of total pressure cells as part of the geotechnical investigation and testing according to EN 1997-1[1] and EN 1997-2[2].

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-11:2019(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
SIST EN ISO 17892-11:2019

This document specifies methods for the laboratory determination of the water flow characteristics in soil.
This document is applicable to the laboratory determination of the coefficient of permeability of soil within the scope of geotechnical investigations.
NOTE       This document fulfils the requirements of the determination of the coefficient of permeability of soils in the laboratory for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-10:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
SIST EN ISO 17892-10:2019

This document specifies two laboratory test methods for the determination of the effective shear strength of soils under consolidated drained conditions using either a shearbox or a ring shear device.
This document is applicable to the laboratory determination of effective shear strength parameters for soils in direct shear within the scope of geotechnical investigations.
The tests included in this document are for undisturbed, remoulded, re-compacted or reconstituted soils. The procedure describes the requirements of a determination of the shear resistance of a specimen under a single vertical (normal) stress. Generally three or more similar specimens from one soil are prepared for shearing under three or more different vertical pressures to allow the shear strength parameters to be determined in accordance with Annex B.
Special procedures for preparation and testing the specimen, such as staged loading and pre-shearing or for interface tests between soils and other materials, are not covered in the procedure of this document.
NOTE       This document fulfils the requirements of the determination of the drained shear strength of soils in direct shear for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018)
SIST EN ISO 17892-12:2018

This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE       The fall cone method in this document should not be confused with that of ISO 17892‑6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-9:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO 17892-9:2018)
SIST EN ISO 17892-9:2018

ISO 17892-9:2018 specifies a method for consolidated triaxial compression tests on water-saturated soils.
ISO 17892-9:2018 is applicable to the laboratory determination of triaxial shear strength under compression loading within the scope of geotechnical investigations.
The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted soil, is subjected to an isotropic or an anisotropic stress under drained conditions and thereafter is sheared under undrained or drained conditions. The test allows the determination of shear strength, stress-strain relationships and effective stress paths. All stresses and strains are denoted as positive numerical values in compression.
NOTE 1    This document provides a test for a single specimen. A set of at least three relatable tests are required to determine the shear strength parameters from these tests. Procedures for evaluating the results are included in Annex B and, where required, the shear strength parameters are to be included in the report.
Special procedures such as:
a)    tests with lubricated ends;
b)    multi-stage tests;
c)    tests with zero lateral strain (K0) consolidation;
d)    tests with local measurement of strain or local measurement of pore pressure;
e)    tests without rubber membranes;
f)     extension tests;
g)    shearing where cell pressure varies,
are not fully covered in this procedure. However, these specific tests can refer to general procedures described in this document.
NOTE 2    This document fulfils the requirements of consolidated triaxial compression tests for geotechnical investigation and testing in accordance with EN 1997‑1 and EN 1997‑2.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day