Dimensions and tolerances of bright steel products of stainless and other special steels

This document applies to bright steel products in the drawn, turned or ground condition delivered in straight lengths. This document is mainly applied to stainless steels of EN 10088-3 and other product standards, e.g. tool steels, roller bearing steels. This document can also be used for cold heading steels both in the form of bars and wire.
The non-alloy and alloy steels of EN 10277 are no longer included.
This document does not cover cold rolled products and cut lengths produced from strip or sheet by cutting.

Maße und Grenzabmaße von Blankstahlerzeugnissen aus nichtrostenden und anderen besonderen Stählen

Dieses Dokument gilt für Blankstahlerzeugnisse in Form gerader Stäbe im gezogenen, geschälten oder geschliffenen Zustand. Dieses Dokument ist hauptsächlich anwendbar auf die nichtrostenden Stähle nach EN 10088-3 und andere Erzeugnisnormen, z. B.: Werkzeugstähle und Wälzlagerstähle. Dieses Dokument kann auch für Kaltstauchstähle sowohl in der Form von Stäben als auch in der Form von Draht verwendet werden.
Die unlegierten und legierten Stähle der EN 10277 sind nicht länger Bestandteil dieser Norm.
Dieses Dokument gilt nicht für kaltgewalzte Erzeugnisse und für aus Band oder Blech geschnittene Stäbe.

Dimensions et tolérances des produits en acier transformés à froid à partir d’acier inoxydable et d’autres aciers spéciaux

Le présent document s'applique aux aciers transformés à froid, à l'état tiré, galeté ou rectifié, livrés sous formes de barres droites. Le présent document est principalement applicable aux aciers inoxydables de l'EN 10088-3 et à d'autres norme de produits, par exemple, les aciers à outils, les aciers à roulement, etc. Le présent document peut être également utilisé pour les aciers obtenus par frappe à froid, à la fois sous forme de barre et de fil.
Les aciers non alliés et alliés de l'EN 10277 sont à présent exclus.
Le présent document ne couvre pas les produits laminés à froid et les longueurs produites à partir de bandes ou de tôles par découpe.

Mere in tolerance svetlih nerjavnih in drugih hladno vlečenih jeklenih izdelkov

General Information

Status
Not Published
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
04-Jan-2023
Due Date
11-Jan-2023
Completion Date
04-Jan-2023

Relations

Buy Standard

Draft
prEN 10278:2022
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 10278:2022
01-april-2022
Mere in tolerance svetlih nerjavnih in drugih hladno vlečenih jeklenih izdelkov

Dimensions and tolerances of bright stainless and other cold drawn steel products

Maße und Grenzabmaße von nichtrostenden Blankstahlerzeugnissen und anderen
kaltgezogenen Stahlerzeugnissen

Dimensions et tolérances des produits en acier inoxydable et autre produits en acier

transformé à froid
Ta slovenski standard je istoveten z: prEN 10278
ICS:
77.140.01 Železni in jekleni izdelki na Iron and steel products in
splošno general
oSIST prEN 10278:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10278:2022
---------------------- Page: 2 ----------------------
oSIST prEN 10278:2022
DRAFT
EUROPEAN STANDARD
prEN 10278
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2022
ICS 77.140.60 Will supersede EN 10278:1999
English Version
Dimensions and tolerances of bright stainless and other
cold drawn steel products

Dimensions et tolérances des produits en acier Maße und Grenzabmaße von nichtrostenden

inoxydable et autre produits en acier transformé à Blankstahlerzeugnissen und anderen kaltgezogenen

froid Stahlerzeugnissen

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 459/SC 5.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10278:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10278:2022
prEN 10278:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Information to be supplied by the purchaser ....................................................................................... 5

4.1 Mandatory information ................................................................................................................................ 5

4.2 Options ................................................................................................................................................................ 5

4.3 Examples ............................................................................................................................................................ 5

5 Requirements ................................................................................................................................................... 6

5.1 Shape, dimensions and tolerances ........................................................................................................... 6

5.2 Surface quality ................................................................................................................................................. 6

5.3 Straightness tolerance .................................................................................................................................. 7

5.4 Condition of bar ends .................................................................................................................................... 7

5.5 Disposition of tolerances ............................................................................................................................. 7

6 Visual and dimensional inspection .......................................................................................................... 7

Annex A (normative) Methods for evaluating straightness ........................................................................ 13

---------------------- Page: 4 ----------------------
oSIST prEN 10278:2022
prEN 10278:2022 (E)
European foreword

This document (prEN 10278:2022) has been prepared by Technical Committee CEN/TC 459 "ECISS –

European Committee for Iron and Steel Standardization" , the secretariat of which is held by AFNOR.

This document is currently submitted to the CEN Enquiry.
This document will supersede EN 10278:1999.

In comparison with the previous edition, the following technical modifications have been made:

— bright steels of EN 10277 are excluded from the scope of this document and its application is

restricted to stainless steels and special steels which can be delivered as bright products, e.g. tool

steels, roller bearing steels, etc.;
— surface condition and tolerance classes revised;

— this document can now also be used for cold heading steels both in form of bars and wire;

— deviation from straightness revised;
— editorially revised.

Through its sub-committee SC 5 “Steels for heat treatment, alloy steels, free-cutting steels and stainless steels” (secretariat:

DIN).
---------------------- Page: 5 ----------------------
oSIST prEN 10278:2022
prEN 10278:2022 (E)
1 Scope

This document applies to bright steel products in the drawn, turned or ground condition delivered in

straight lengths. This document is mainly applied to stainless steels of EN 10088-3 and other product

standards, e.g. tool steels, roller bearing steels. This document can also be used for cold heading steels

both in the form of bars and wire.
The non-alloy and alloy steels of EN 10277 are no longer included.

This document does not cover cold rolled products and cut lengths produced from strip or sheet by

cutting.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 10079, Definition of steel products

EN 10088-3:2014, Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars,

rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10204, Metallic products - Types of inspection documents
EN ISO 9443, Surface quality classes for hot-rolled bars and wire rod (ISO 9443)

ISO 286-2, Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part

2: Tables of standard tolerance classes and limit deviations for holes and shafts

ISO 10474, Steel and steel products - Inspection documents
3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 10079 (for drawn products)

and the following apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
thickness
nominal dimension of the product
Note 1 to entry: That means:
a) the diameter in the case of rounds;
b) the lateral length in the case of squares;
c) the width over flats in the case of hexagons;

d) the shorter lateral length in the case of flats (rectangular bars) and wide-flats.

For special sections, 'thickness' has to be defined at the time of enquiry and order.

---------------------- Page: 6 ----------------------
oSIST prEN 10278:2022
prEN 10278:2022 (E)
3.2
ovality

difference between the smallest and largest dimension measured across the pairs of opposing points at a

common cross-section
3.3
out-of shape
any deviation for the nominal section profile
4 Information to be supplied by the purchaser
4.1 Mandatory information

The following information shall be supplied by the purchaser at the time of enquiry and order:

a) quantity (mass, number of bars) to be delivered;
b) shape of the product (e.g. round, hexagon, square, flat);
c) reference to this document, i.e. EN 10278;
d) the nominal dimensions and tolerances on dimensions and shape;

e) reference to the material standard including the number of the part (e.g. EN 10088-3);

f) steel name or steel number;
g) the finished condition (see 5.1);

h) the class of surface quality (see EN ISO 9443) where appropriate (not for EN 10088-3).

4.2 Options

Several options are specified in this document and listed below. If the purchaser does not indicate any of

these options, the products will be supplied in accordance with the basic specifications (see 4.1).

1. Straightness (see 5.3);
2. Condition of bar ends (see 5.4);
3. Disposition of tolerances (see 5.5);
4. The type of inspection document in accordance with EN 10204 or ISO 10474.
4.3 Examples
EXAMPLE 1
10t rounds EN 10278 – 50 h8 x stock 3000
EN 10088-3-X5CrNi18-10+2P
EN 10204 – 3.1
10t rounds EN 10278 – 50 h8 x stock 3000
EN 10088-3-1.4301+2P
EN 10204 – 3.1
---------------------- Page: 7 ----------------------
oSIST prEN 10278:2022
prEN 10278:2022 (E)
EXAMPLE 2
2 t rounds EN 10278 – 20 h9 x stock 6000
EN ISO 4957-32CrMoV12-28 –
EN ISO 9443 - class B
ISO 10474 – 3.1
2t rounds EN 10278 – 20 h9 x stock 6000
EN ISO 4957-1.2365+C
EN ISO 9443 – class B
ISO 10474 – 3.1
5 Requirements
5.1 Shape, dimensions and tolerances
The tolerance class on thickness (and width for f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.