prEN ISO 10256-5

Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for use in ice hockey (ISO/DIS 10256-5:2025)

ISO 10256-5:2017 specifies performance requirements and test methods for neck laceration protectors for use in ice hockey and is intended to be used in conjunction with ISO 10256-1:2024. The 2017 version needs revisions to align with the other parts of the 10256 series, currently awaiting publication.

Schutzausrüstung zum Gebrauch beim Eishockey - Teil 5: Nackenschützer gegen Verletzungen zum Gebrauch beim Eishockey (ISO/DIS 10256-5:2025)

Dieses Dokument legt Leistungsanforderungen und Prüfverfahren für schnittfeste Halsschutze zur Verwendung beim Eishockey fest.
Dieses Dokument ist für schnittfeste Halsschutze vorgesehen, die von:
   Eishockeyspielern und
   Schiedsrichtern getragen werden.
Dieses Dokument behandelt nicht den Schutz des Halses vor Schlägen oder Stößen durch Pucks, Schläger oder andere Gegenstände.

Équipements de protection destinés à être utilisés en hockey sur glace - Partie 5: Protections contre les lacérations du cou pour le hockey sur glace (ISO/DIS 10256-5:2025)

Varovalna oprema za uporabo pri hokeju na ledu - 5. del: Ščitniki vratu pred poškodbami za uporabo pri hokeju na ledu (ISO/DIS 10256-5:2025)

General Information

• Status: Not Published
• Publication Date: 11-Jan-2027
• ICS: 13.340.20 - Head protective equipment
• ICS: 97.220.20 - Winter sports equipment
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 17-Jul-2025
• Due Date: 11-Apr-2026
• Completion Date: 17-Jul-2025
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Mandate: M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
• Mandate: M/571 AMD 1 - Personal Protective Equipement
• Ref Project: oSIST prEN ISO 10256-5:2025 - Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for use in ice hockey (ISO/DIS 10256-5:2025)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2025
Varovalna oprema za uporabo pri hokeju na ledu - 5. del: Ščitniki vratu pred
poškodbami za uporabo pri hokeju na ledu (ISO/DIS 10256-5:2025)
Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for use in
ice hockey (ISO/DIS 10256-5:2025)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 5: Nackenschützer gegen
Verletzungen zum Gebrauch beim Eishockey (ISO/DIS 10256-5:2025)
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 5:
Protections contre les lacérations du cou pour le hockey sur glace (ISO/DIS 10256-
5:2025)
Ta slovenski standard je istoveten z: prEN ISO 10256-5
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
97.220.20 Oprema za zimske športe Winter sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 10256-5.2
ISO/TC 83/SC 5
Protective equipment for use in ice
Secretariat: SCC
hockey —
Voting begins on:
Part 5: 2025-07-17
Neck laceration protectors for use
Voting terminates on:
2025-09-11
in ice hockey
ICS: 97.220.20; 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10256-5.2:2025(en)
DRAFT
ISO/DIS 10256-5.2:2025(en)
International
Standard
ISO/DIS 10256-5.2
ISO/TC 83/SC 5
Protective equipment for use in ice
Secretariat: SCC
hockey —
Voting begins on:
Part 5:
Neck laceration protectors for use
Voting terminates on:
in ice hockey
ICS: 97.220.20; 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10256-5.2:2025(en)
ii
ISO/DIS 10256-5.2:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Types of neck laceration protectors .2
4.2 Ergonomics .2
4.3 Innocuousness .2
4.3.1 Materials .2
4.3.2 Design . .2
4.4 Markings and information .2
4.5 Coverage of the protected area .3
4.6 Protector stability and recovery .3
4.7 Cut resistance .3
5 Test methods . 3
5.1 General .3
5.1.1 Tolerances .3
5.1.2 Sampling .3
5.1.3 Sample conditioning .3
5.2 Ergonomics .3
5.3 Innocuousness .4
5.3.1 Materials .4
5.3.2 Design .4
5.4 Protected area .4
5.4.1 Test apparatus .4
5.4.2 Procedure .4
5.5 Protector stability and recovery .5
5.5.1 Test apparatus .5
5.5.2 Procedure .5
5.6 Cut resistance verification .5
6 Test report . 5
7 Markings . 5
8 Information for users . 5
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered . 9

iii
ISO/DIS 10256-5.2:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 83, Sports and other recreational facilities and
equipment, Subcommittee SC 5, Ice hockey equipment and facilities.
This second edition cancels and replaces the first edition (ISO 10256-5:2017), which has been technically
revised.
The main changes are as follows:
— Clause 3.2 definitions have been modified for clarification;
— Clause 4.1 has been added to describe the two types of neck laceration protectors;
— Clause 4.3.2 has been modified;
— Clause 4.6 a new requirement and test procedure for protector stability and recovery have been added;
— Clause 4.7 has been modified to clarify cut resistance;
— Clause 5.1.2.3 has been modified to clarify sample preparation;
— Clause 5.5 has been modified to clarify protector stability and recovery;
— Clause 5.6 has been modified to clarify cut resist
...