EN 1516:1999
(Main)Surfaces for sports areas - Determination of resistance to indentation
- BACK
- 17-Aug-1999
- 91.060.30
- 97.220.10
- CEN/TC 217
Surfaces for sports areas - Determination of resistance to indentation
This European Standard specifies a method of test for the determination of resistance to indentation of artificial sports surfaces, other than synthetic turf.
Sportböden - Bestimmung des Eindruckverhaltens
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Eindruckfestigkeit von einigen Sportflächen fest.
Sols sportifs - Détermination de la résistance à l'identation
La présente norme européenne spécifie une méthode d'essai permettant de déterminer la résistance à l'indentation de certains sols sportifs.
Podloge za športne dejavnosti – Ugotavljanje odpornosti proti vtiskovanju
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podloge za športne dejavnosti – Ugotavljanje odpornosti proti vtiskovanjuSportböden - Bestimmung des EindruckverhaltensSols sportifs - Détermination de la résistance a l'identationSurfaces for sports areas - Determin
...
This May Also Interest You
This document specifies the requirements and test methods for durability and strength of hardware for vertical and horizontal pivot windows and door height windows (including pivot hinges and central locking systems).
If the hardware manufacturer would like to classify an integrated restrictor function, the pivot hinges can be tested in accordance with EN 13126-5.
This document does not apply to manoeuvring devices which are covered in EN 13126-2, EN 13126-3, and EN 13126-14.
- Draft25 pagesEnglish languagesale 10% offe-Library read for×1 day
This document covers hinged/pivoted and sliding doorsets with engaging fasteners (e.g. latches, deadbolts) for pedestrian use. It defines the test methods to determine the forces to open/close doors and to engage/release and lock/unlock the building hardware using a key or handle. It is only applicable to the manual operation of doorsets.
These doorsets can include:
— emergency or panic exit devices;
— door closing devices.
NOTE The use of some windows involves engaging fasteners (e.g. latches, deadbolts) and can be tested in accordance with this document. Throughout the text where “door leaf”/”door leaves” is written this can also be read as “casements”/”sashes”.
- Draft14 pagesEnglish languagesale 10% offe-Library read for×1 day
This document provides requirements and guidelines for comparing the life cycles of bio-based products with their fossil-based equivalents.
NOTE The term "equivalents" generally refers to the "functional equivalence".
This document builds on existing LCA methodology and provides requirements and guidance on specific topics relevant for making well-balanced comparisons.
- Draft55 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 13.020.55
- 13.020.60
- CEN/TC 411
This document specifies a method for the sampling of NO2 in ambient air using diffusive sampling followed by extraction and analysis by colourimetry or ion chromatography (IC). It can be used for the NO2 measurement in a concentration range of approximately 3 µg/m3 to 130 µg/m3 [12]. A sample is typically collected for a period of 1 to 4 weeks [14], with exposure periods depending on the design of the samplers and the concentration levels of NO2.
Several sorbents can be used for trapping NO2 in ambient air using a diffusive sampler [15]. This document specifies the application of triethanolamine as the reagent.
This document describes the application of a tube-type sampler (with either a cylindrical or a slightly conical tube), a badge-type sampler and a radial-type sampler.
The relative expanded uncertainty of NO2 measurements performed using these tube-type diffusive samplers can potentially be lower than 25 % for individual measurements. When aggregating results to form annual average values, the relative expanded uncertainty can be further reduced to levels below 15 % due to the reduction of random effects on uncertainty [9].
NOTE NO2 passive samplers are also employed to measure NOx with the addition of an oxidant to convert ambient NO into NO2. A second NO2 sampler is also deployed without the oxidant and the concentration of NO is determined from the difference of the two samplers [16].
- Draft57 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 13.040.20
- 2008/50/EC
- CEN/TC 264
This document is applicable to the heavy rail system.
This document defines the requirements for the provision, visibility, readability, maintenance and testing of a specific set of ERTMS trackside boards associated with the following DMI and ETCS track conditions:
— ETCS stop marker
— ETCS location marker
— level transition, corresponding to transitions between ETCS levels
— lower pantograph
— pantograph lowered
— raise pantograph
— neutral section announcement
— neutral section
— end of neutral section
— GSM-R network border marker
— no traction system fitted announcement
— no traction system fitted indication
— traction system AC 25 kV 50 Hz announcement
— traction system AC 25 kV 50 Hz indication
— traction system AC 15 kV 16,7 Hz announcement
— traction system AC 15 kV 16,7 Hz indication
— traction system DC 3 kV announcement
— traction system DC 3 kV indication
— traction system DC 1,5 kV announcement
— traction system DC 1,5 kV indication
— traction system DC 600/750 V announcement
— traction system DC 600/750 V indication
— activate the audible warning device (horn) indication
— safe stopping area announcement
— safe stopping area indication for start
— safe stopping area indication for end
— inhibition of brake announcement/indication for start/indication for revocation
— level crossing marker
NOTE 1 the brake MBs apply for any of the three brake types (eddy current, magnetic shoe, regenerative), whereas the exact type concerned would be known by the driver via existing Route knowledge.
The following ETCS track conditions are outside the scope of this Standard:
— Safe stopping area semi-continuous indication for in-between
— Non-stopping area announcement
— Non-stopping area announcement
— Non stopping area indication for start
— Non stopping area indication for end
— Non stopping area semi-continuous indication for in-between
— Close air conditioning intake announcement
— Close air conditioning intake indication
— Open air conditioning intake announcement
— Open air conditioning intake indication
This document includes the arrangement of the boards and their interface with existing systems (track, cab design including cab sight lines, visibility by the driver and train head lamps).
Mobile, backlit and temporary signs are not within the scope of this document.
The application of ERTMS trackside boards is not within the scope of this document.
Sighting requirements are not within the scope of this document. The sighting process needs to be implemented in accordance with national rules.
- Draft30 pagesEnglish languagesale 10% offe-Library read for×1 day
The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using ‘Public Land Mobile Networks’(PLMN), which supports the European pre-assigned emergency destination address (see normative references) and to provide a means of manually triggering the notification of an incident.
This document specifies the general operating requirements and intrinsic procedures for in-vehicle emergency call (eCall) services in order to transfer an emergency message from a vehicle to a Public Safety Answering Point (PSAP) in the event of a crash or emergency, via an eCall communication session and to establish a voice channel between the in-vehicle equipment and the PSAP.
Private third party in-vehicle emergency supporting services can also provide a similar eCall function by other means. The provision of such services are defined in EN 16102, and are outside the scope of this document.
The communications protocols and methods for the transmission of the MSD are not specified in this document.
This document specifies the operating requirements for an eCall service. An important part of the eCall service is a Minimum Set of Data (MSD). The operating requirements for the MSD are determined in this document, but the form and data content of the MSD is not defined herein. A common European MSD is determined in EN 15722.
This document does not specify whether eCall is provided using embedded equipment or other means (for example in the case of aftermarket equipment).
- Draft30 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 03.220.20
- 35.240.60
- 2010/40/EU
- CEN/TC 278
This document specifies requirements and test methods for spray pattern sprinklers with a k-factor of at least K160, extended coverage (EC) sprinklers of at least K80, extended coverage storage sprinklers of at least K200 and control mode special application (CMSA) sprinklers. This document only covers sprinkler types up to K360.
This document does not apply to concealed, conventional, flat spray, flush and recessed sprinklers.
- Draft52 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 13.220.20
- CEN/TC 191
This document provides guidelines for the characterization of waterlogged archaeological wood to support decision-making processes for its preservation.
This document can be applied for the management of wood discovered in waterlogged environments, including terrestrial and aquatic (marine and freshwater) sites, as a basis for designing conservation strategies (e.g. reburial, in situ preservation, post-excavation storage). In the case of composite artefacts made of wood and other materials, this document is applicable only for the wooden components. Methods for conservation, site protection and monitoring for reburial as well as in situ preservation are beyond the scope of this document.
- Draft15 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 97.195
- CEN/TC 346
This document specifies the requirements and describes the test methods for check valves for water mist firefighting systems.
Check valves allow the passage in the direction of flow and they prevent flow in the reverse direction.
This document is applicable to check valves installed in the pipework of water mist firefighting systems.
- Draft9 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Apr-2025
- 13.220.20
- CEN/TC 191
This document specifies application services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies application protocols, especially the M-Bus application protocol.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard120 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.