Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip

This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting (Cobalt, Nickel and iron based alloys) alloy plate, sheet and strip. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 001: Platten, Bleche und Bänder

Diese Europäische Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Kontrolle und
Lieferung von Platten, Blechen und Bändern aus Stahl und hochwarmfesten Legierungen (Kobalt-,
Nickel- und Eisenlegierungen) fest. Sie ist anzuwenden, wenn sie bei Verweisung auf oder in Verbindung mit
der EN-Werkstoffnorm erwähnt wird, sofern in der Zeichnung, Bestellung oder der Prüfanweisung nichts
anderes angegeben ist.

Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 001: Plaques, tôles et bandes

Cette Norme Européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et
livraison de plaques, tôles et bandes en acier et alliages (cobalt, nickel et alliages ferreux) résistant à chaud.
La présente norme est applicable lorsqu'elle est citée et conjointement avec la norme de matériaux EN sauf
instruction contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična specifikacija - 001. del: Plošče, pločevina in trakovi

Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo plošč, pločevin in trakov iz jekla in zlitin (kobalt, nikelj in na železu zasnovane zlitine), odpornih proti vročini. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

Status
Published
Publication Date
31-Aug-2010
Withdrawal Date
30-Mar-2011
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Sep-2010
Completion Date
01-Sep-2010

Relations

Buy Standard

Standard
EN 4700-001:2011
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 001: Platten, Bleche und BänderSérie aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 001: Plaques, tôles et bandesAerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip77.140.50SROL]GHONLFlat steel products and semi-products49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4700-001:2010SIST EN 4700-001:2011en,de01-maj-2011SIST EN 4700-001:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4700-001
September 2010 ICS 49.025.10 English Version
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 001: Plaques, tôles et bandes
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 001: Platten, Bleche und BänderThis European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4700-001:2010: ESIST EN 4700-001:2011

(ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) EN 2002-001, Aerospace series — Metallic materials — Test methods — Part 001: Tensile testing at ambient temperature EN 2002-002, Aerospace series — Metallic materials — Test methods — Part 002: Tensile testing at elevated temperature
EN 10079, Definition of steel products TR 2410, Aerospace series — Metallic materials — Relationship between dimensional standards and material standards 2) AMS 2315, Determination of Delta Ferrite Content 3) AMS 2750, Pyrometry 3)
ASTM A604, Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets 4)
1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 3) Published by: Society of Automotive Engineers (SAE), (www.sae.org). SIST EN 4700-001:2011

4) Published by: American Society for Testing and Materials http://www.astm.org/. SIST EN 4700-001:2011
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.