EN 1627:2011/FprA1
(Amendment)Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
This European Standard specifies requirements and classification systems for burglar resistant characteristics of complete pedestrian doorsets, windows, curtain walling, grilles and shutters. Hardware is a component on the products and cannot be classified as such according to this standard.
It is applicable to the following means of opening: turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted and rolling as well as fixed constructions. It also covers products that include items such as letter plates or ventilation grilles. It specifies requirements for the burglar resistance of a construction product (as defined in 3.1 of this standard).
This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241 1.
This European Standard does not directly cover the resistance of locks and cylinders to attack with picking tools. It also does not cover precast concrete elements.
It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant construction products using attack methods that might defeat these characteristics.
NOTE 1 The mechanical parts of electric, electronic and electromagnetic operated burglar resistant construction products can be tested in electrical powerless condition.
NOTE 2 It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung - Anforderungen und Klassifizierung
Die vorliegende Europäische Norm legt die Anforderungen und die Klassifizierung der einbruchhem¬menden Eigenschaften von Türelementen, Fenstern, Vorhangfassaden, Gitterelementen und Abschlüssen fest. Sie gilt für die folgenden Öffnungsarten: Drehen, Kippen, Falten, Drehkippen, Schwingen, Schieben (horizontal und vertikal) und Rollen sowie für nicht öffenbare Konstruktionen. Sie behandelt außerdem auch Produkte, die Elemente wie beispielsweise Briefklappen oder Lüftungsgitter enthalten. Die Norm legt Anfor¬derungen an die Einbruchhemmung eines Bauproduktes fest (entsprechend 3.1 der vorliegenden Norm).
Diese Europäische Norm behandelt nicht direkt die Widerstandsfähigkeit von Schlössern und Schließzylindern gegen Angriffe mit Sperrwerkzeugen (Picking). Außerdem behandelt sie keine Betonfertigteile.
Ebenfalls nicht behandelt wird der Angriff auf elektrisch, elektronisch und elektromagnetisch betätigte ein-bruchhemmende Bauprodukte mit Hilfe von Angriffsmethoden, die diese Eigenschaften ausschalten könnten.
ANMERKUNG 1 Die mechanischen Teile von elektrisch, elektronisch und elektromagnetisch betätigten einbruchhem¬menden Bauprodukten können im spannungslosen Zustand jedoch geprüft werden.
Diese Europäische Norm gilt nicht für Türen, Tore und Schranken, die für den Einbau in Bereichen für den Zugang von Personen dienen und die hauptsächlich für einen sicheren Zugang für Güter und von Personen geführten Fahrzeugen in industriellen, gewerblichen und Wohnbereichen gedacht sind, welche in den Anwendungsbereich von EN 13241-1 fallen.
ANMERKUNG 2 Bauprodukte, die durch Kraftfahrzeuge erreicht oder durchfahren werden können, sollten durch geeig¬nete Maßnahmen, wie Sperren, ausfahrbare Rampen usw. geschützt werden.
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à l'effraction - Prescriptions et classification
La présente Norme européenne fixe les exigences et les systèmes de classification relatifs aux
caractéristiques de résistance à l’effraction des blocs-portes pour piétons, fenêtres, façades rideaux, grilles et
fermetures. Elle s’applique aux constructions fixes et aux systèmes ouvrants suivants : battant, oscillant,
pliant, oscillo-battant, à gonds haut ou bas, coulissant (horizontalement et verticalement) et à enroulement.
Elle couvre également les produits comportant des éléments tels que des fentes à lettres ou des grilles de
ventilation. Elle spécifie les exigences relatives à la résistance à l’effraction d’un produit de construction (telle
que définie en 3.1 dans la présente norme).
La présente Norme européenne ne traite pas directement de la résistance aux ouvertures fines des serrures
et des cylindres. Elle ne s’applique pas non plus aux éléments préfabriqués en béton.
Elle ne couvre pas non plus l’attaque des produits de construction résistants à l’effraction actionnés de façon
électrique, électronique et électromagnétique, à l’aide de méthodes susceptibles de neutraliser ces
caractéristiques.
NOTE 1 Les parties mécaniques des produits de construction électriques, électroniques et électromagnétiques
résistants à l’effraction peuvent être soumises à l’essai hors tension.
La présente Norme européenne ne s’applique pas aux portes, portails et barrières, destinés à être installés
dans des zones accessibles aux personnes et dont l’utilisation principale prévue est de permettre l’accès
sécurisé de marchandises et de véhicules accompagnés ou conduits par des personnes, dans des locaux
industriels et commerciaux ou des garages dans les zones d’habitation, tel que traité par l’EN 13241-1.
NOTE 2 Il convient que les produits de construction qui sont accessibles ou peuvent être empruntés par des véhicules,
soient protégés par des moyens appropriés tels que des barrières, rampes déployables, etc.
Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Zahteve in klasifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2015
Vrata, okna, obešene fasade, mreže in polkna - Protivlomna odpornost - Zahteve in
klasifikacija
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance -
Requirements and classification
Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung -
Anforderungen und Klassifizierung
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à
l'effraction - Prescriptions et classification
Ta slovenski standard je istoveten z: EN 1627:2011/FprA1
ICS:
13.310 Varstvo pred kriminalom Protection against crime
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 1627:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2015
ICS 13.310; 91.060.50
English Version
Pedestrian doorsets, windows, curtain walling, grilles and
shutters - Burglar resistance - Requirements and classification
Blocs-portes pour piétons, fenêtres, façades rideaux, grilles Türen, Fenster, Vorhangfassaden, Gitterelemente und
et fermetures - Résistance à l'effraction - Prescriptions et Abschlüsse - Einbruchhemmung - Anforderungen und
classification Klassifizierung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 1627:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1627:2011/FprA1:2015 E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to Clause 1, Scope .4
2 Modifications to Clause 2, Normative references .4
3 Modifications to Clause 3, Terms and definitions .5
4 Modifications to Clause 4, Resistance classification .5
5 Modifications to Clause 6, Hardware .5
6 Modifications to Clause 7, Mechanical strength .9
7 Modification to Clause 8, Manual burglary attempts . 12
8 Modifications to Clause 9, Classification report . 13
9 Modification to Clause 10, Installation . 13
10 Modifications to Clause 11, Test specimens . 13
11 Modifications to Annex B (normative), Requirements for locks and hardware outside the
scope of the standards listed in Table 2 . 13
12 Modifications to D.1, Dimensions . 14
13 Modifications to D.2, Exchange of hardware elements . 14
14 Modifications to D.3, Other modifications . 14
Foreword
This document (EN 1627:2011/FprA1:2015) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
1 Modification to Clause 1, Scope
Replace the Scope with:
"This European Standard specifies requirements and classification systems for burglar resistant
characteristics of complete pedestrian doorsets, windows, curtain walling, grilles and shutters. Hardware is a
component on the products and cannot be classified as such according to this standard.
It is applicable to the following means of opening: turning, tilting, folding, turn-tilting, top or bottom hung,
sliding (horizontally and vertically), pivoted and rolling as well as fixed constructions. It also covers products
that include items such as letter plates or ventilation grilles. It specifies requirements for the burglar resistance
of a construction product (as defined in 3.1 of this standard).
This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the
reach of persons, and for which the main intended uses are giving safe access for goods and vehicles
accompanied or driven by persons in industrial, commercial or residential premises, as covered by
EN 13241-1.
This European Standard does not directly cover the resistance of locks and cylinders to attack with picking
tools. It also does not cover precast concrete elements.
It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant
construction products using attack methods that might defeat these characteristics.
NOTE 1 The mechanical parts of electric, electronic and electromagnetic operated burglar resistant construction
products can be tested in electrical powerless condition.
NOTE 2 It is important that construction products that can be reached or driven through by vehicles are protected by
appropriate measures such as barriers, extensible ramps, etc.".
2 Modifications to Clause 2, Normative references
Replace:
“EN 1303:2005, Building hardware — Cylinders for locks — Requirements and test methods”
with:
“EN 1303:2015, Building hardware — Cylinders for locks — Requirements and test methods”.
Replace:
“EN 1906:2010, Building hardware — Lever handles and knob furniture — Requirements and test methods
EN 12209:2003, Building hardware — Locks and latches — Mechanically operated locks, latches and locking
plates — Requirements and test methods”
with:
“EN 1906:2012, Building hardware — Lever handles and knob furniture — Requirements and test methods
FprEN 12209:2015, Building hardware — Mechanically operated locks and locking plates — Requirements
and test methods”.
Add:
“EN 13126-3:2011, Building hardware — Hardware for windows and door-height windows — Requirements
and test methods — Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware
EN 14846:2008, Building hardware — Locks and latches — Electromechanically operated locks and striking
plates — Requirements and test methods
EN 15684:2012, Building hardware — Mechatronic cylinders — Requirements and test methods”.
3 Modifications to Clause 3, Terms and definitions
In 3.3, at the end of the definition, add:
", or there is no opening element".
In 3.3, at the end of the NOTE, add
", or fixed windows. Fixed constructions are also defined as a Group 1 product.".
4 Modifications to Clause 4, Resistance classification
In the third paragraph, replace "A product offering burglar resistance at more than one closing condition shall
be tested, assessed and classified at each closing condition."
with
"During testing the test specimen shall be closed and locked at the declared closing condition in accordance
with the manufacturer's instructions.".
In the fifth paragraph, replace "Annex F" with "Annex E".
5 Modifications to Clause 6, Hardware
Replace the text in Clause 6 with:
"6.1 General
Performance evaluation of hardware fitted on pedestrian doorsets, windows, curtain walling, grilles and
shutters subject to this standard will be as described below:
The requirements of Tables 2A and 2B are valid for those parts of the hardware components that are
accessible from the attack side of the pedestrian doorsets, windows, curtain walling, grilles and shutters
defined by the applicant.
6.2 Key related security
All mechanically or electrically operated cylinders or lever locks shall meet the requirements of Table 2A.
Table 2A — Key related security
RC 2N/
European Standard Class RC 1 RC 3 RC 4 RC 5 RC 6
RC 2
EN 1303:2015
Digit 7 Mechanical keys 4 4 4 6 6 6
Cylinders for locks
Digit 5 Mechanical keys E E E F F F
EN 15684:2012
Mechatronic cylinders
Digit 6 Electrical keys B C D D E F
FprEN 12209:2015
Digit 8 Mechanical keys B B B D F G
Mechanically operated locks
and locking plates
prEN 15685:2011
Digit 8 Mechanical keys B B B D F G
Multipoint locks, latches and
locking plates
EN 14846:2008
Digit 7 Security
Electromechanically
B B B D F G
Digit 11 Mechanical keys
operated locks and striking
(EN 12209:2003)
plates
NOTE 1 The relation between the published version of the standard and the draft revisions (prEN: dated version) is as
follows:
RC 2N/
European Standard Class RC 1 RC 3 RC 4 RC 5 RC 6
RC 2
EN 1303:2005
Digit 7 Mechanical keys 4 4 4 6 6 6
Cylinders for locks
EN 12209:2003 Digit 11 Key
a a a a a a
Mechanically operated
identification
locks and locking plates
requiremens
a
No reference in EN 1627:2011.
NOTE 2 Some building elements may include hardware without any key related security.
6.3 Hardware evaluation
6.3.1 General
Verification of compliance of hardware components will be implemented according to two alternatives:
6.3.2 Alternative 1
The hardware components shall meet the requirements of Table 2B according to the standard applicable to
them.
Table 2B — Attack resistance by product standard
European
Class RC 1N RC 2N RC2 RC 3 RC 4 RC 5 RC 6
Standard
EN 1303:2015 b b
Digit 8 Attack resistance C C C C D
Cylinders for locks
EN 15684:2012 b b
Digit 8 Attack resistance 1 1 1 1 2
Mechatronic cylinders
FprEN 12209:2015
Digit 7 Security and drill
a b b
Mechanically operated 3 3 3 4 7
resistance
locks and locking plates
Digit 7 Security for a b b
3 3 3 4 7
locking points
prEN 15685:2011
Multipoint locks, latches
and locking plates Digit 9 Security for anti-
a b b
3 3 3 4 7
separation point
Digit 7 Security
EN 14846:2008
a b b
Digit 7 Security and drill
Electromechanically
3 3 3 4 7
resistance
operated locks and striking
plates
(EN 12209: 2003)
EN 1906:2012
*) b b
Digit 7 Security 1 2 2 3 4
Lever handles and knob
furniture
EN 13126-3:2011
c c c
Digit 7 Security
(1 ) (1 ) (1 )
Handles primary for tilt and
2 2 2 2
First digit (Twisting and
turn, Tilt-first and Turn-only
2 2 2
forcing)
hardware
a
A lock with security class 6 (digit 7) may be used if the drill resistance required in class 7 is provided by the door
construction.
b
Test according to 6.3.2.
c
Only if two or more handles are used on a single sash.
NOTE The relation between the published version of the standard and the draft revisions (prEN: dated version) is as
follows:
European
Class RC 1N RC 2N RC 2 RC 3 RC 4 RC 5 RC 6
Standard
EN 1303:2005 b b
Digit 8 Attack resistance 1 1 1 1 2
Cylinders for locks
EN 12209:2003
Digit 7 Security and drill
a b b
3 3 3 4 7
Mechanically operated
resistance
locks and locking plates
a
A lock with security class 6 (digit 7) may be used if the drill resistance required in class 7 is provided by the door construction.
b
Test according to 6.3.2.
Hardware outside of the scope of the standards listed in Table 2B shall comply with requirements of 6.3.2
(Alternative 2) and Table 2C.
6.3.3 Alternative 2
For RC1N, the performances of the building hardware are assessed during static and dynamic test according
to EN 1628 and EN 1629 with the requirements of Table 2B.
For class products RC2 to RC6 when at least one of hardware elements do not meet the requirements of
Table 2B or if the hardware components are not covered by the standards listed in Table 2B they are
assessed according to the requirements following the resistance classes in Table 2C requirements and test
methods as in Annex B.
Table 2C — Attack requirement
Hardware pe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.