iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14653-1:2005

(Main)

Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications

Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications

This document specifies constructional and structural requirements for manually operated hydraulic shoring systems made from steel and aluminium for groundwork support.
It specifies characteristic resistances for the equipment.

Manuell gesteuerte hydraulische Grabenverbaugeräte - Teil 1: Produktfestlegungen

Dieses Dokument legt konstruktionstechnische und bautechnische Anforderungen an manuell gesteuerte
hydraulische Grabenverbaugeräte aus Stahl und Aluminium fest.
Sie legt die charakteristischen Festigkeiten der Konstruktionen fest.

Composants des blindages de tranchées - Partie 1: Spécifications du produit

Ročno upravljane hidravlične naprave za razpiranje izkopov – 1. del: Specifikacija proizvodov

General Information

Status
Published
Publication Date
12-Apr-2005
ICS
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
CEN/TC 53 - Temporary works equipment
Drafting Committee
CEN/TC 53/WG 9 - Trench lining systems
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Mar-2021
Ref Project
SIST EN 14653-1:2005 - Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications

Buy Standard

EN 14653-1:2005EN 14653-1:2005
PreviousNext
Standard
EN 14653-1:2005
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14653-1:2005
01-julij-2005
5RþQRXSUDYOMDQHKLGUDYOLþQHQDSUDYH]DUD]SLUDQMHL]NRSRY±GHO6SHFLILNDFLMD
SURL]YRGRY
Manually operated hydraulic shoring systems for groundwork support - Part 1: Product
specifications
Manuell gesteuerte hydraulische Grabenverbaugeräte - Teil 1: Produktfestlegungen
Composants des blindages de tranchées - Partie 1: Spécifications du produit
Ta slovenski standard je istoveten z: EN 14653-1:2005
ICS:
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN 14653-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14653-1:2005

---------------------- Page: 2 ----------------------

SIST EN 14653-1:2005
EUROPEAN STANDARD
EN 14653-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 93.020
English version
Manually operated hydraulic shoring systems for groundwork
support - Part 1: Product specifications
Composants des blindages de tranchées - Partie 1: Manuell gesteuerte hydraulische Grabenverbaugeräte - Teil
Spécifications du produit 1: Produktfestlegungen
This European Standard was approved by CEN on 28 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14653-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14653-1:2005
EN 14653-1:2005 (E)
Contents Page
Foreword. 3
Introduction . 4
1 Scope. 5
2 Normative references . 5
3 Terms and definitions. 6
4 Symbols . 22
5 General requirements. 23
6 Materials. 23
7 Requirements . 25
8 Special requirements for hydraulic components . 35
9 Assessment . 39
10 Instruction manual. 39
11 Marking . 42
12 Conformity . 42
Annex A (normative) Partial safety factors .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14653-2:2005(Main)
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
SIST EN 14653-2:2005

This document specifies methods of calculation and test to assess the conformity of manually operated hydraulic systems for groundwork support whose performance is specified in prEN 14653-1.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13331-1:2002(Main)
Trench lining systems - Part 1: Product specifications
SIST EN 13331-1:2002

This European Standard specifies the requirements for metallic trench lining systems assembled completely from prefabricated components which are all purpose made. It includes material requirements, constructional and structural requirements and quality assurance.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13331-2:2002(Main)
Trench lining systems - Part 2: Assessment by calculation or test
SIST EN 13331-2:2002

This second part of European Standard prEN 13331 specifies methods of calculation and test to assess conformity with Part 1. It is limited to steel, cast iron and aluminium for the principal components.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-8:2023(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 8: Measurement of loads: Load cells (ISO 18674-8:2023)
SIST EN ISO 18674-8:2024

This document specifies the measurement of forces by means of load cells carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674-1.
This document is applicable to:
—     performance monitoring of geotechnical structures such as anchors, tiebacks, piles, struts, props and steel linings;
—     checking geotechnical designs and adjustment of construction in connection with the observational method;
—     evaluating stability during or after construction.
This document is not applicable to devices where the load is purposely applied to geotechnical structures in the wake of geotechnical field tests such as calibrated hydraulic jacks for pull-out tests of anchors or load tests of piles.
NOTE 1       This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of load cells as part of the geotechnical investigation and testing in accordance with References [2] and [3].
NOTE 2       ISO 18674-7 is intended to define the measurement of forces by means of strain or displacement gauges.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22477-2:2023(Main)
Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO 22477-2:2023)
SIST EN ISO 22477-2:2023

This document establishes the specifications for the execution of static pile load tests in which a single pile is subjected to an axial static load in tension in order to define its load-displacement behaviour.
This document is applicable to vertical piles as well as raking piles.
All types of piles are covered by this document. The tests considered in this document are limited to maintained load tests. Cyclic load tests are not covered by this document.
NOTE            ISO 22477-2 is intended to be used in conjunction with EN 1997-1. Numerical values of partial factors for limit states and of correlation factors to derive characteristic values from static pile load tests to be taken into account in design are provided in EN 1997-1.
This document provides specifications for the execution of static axial pile load tests:
a)       checking that a pile behaves as designed,
b)       measuring the resistance of a pile.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-5:2023(Main)
Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
SIST EN ISO 22476-5:2023

This document is applicable to pressuremeter tests using cylindrical flexible probes placed in pre-existent boreholes using testing procedures other than the Menard procedure.
Pressuremeter tests following the Menard procedure are provided in ISO 22476-4.
NOTE          A high-pressure flexible pressuremeter probe which contains transducers for the measurement of radial displacements is also known as flexible dilatometer probe or high-pressure dilatometer probe.
This document applies to tests performed in any kind of grounds, starting from soils, treated or untreated fills, hard soils and soft rocks, up to hard and very hard rocks, either on land or offshore.
The parameters derived from this test can include stiffness, strength, initial in-situ stress state and consolidation properties.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17685-1:2023(Main)
Earthworks - Chemical tests - Part 1: Determination of loss on ignition
SIST EN 17685-1:2023

This document specifies a method for the determination of the loss on ignition (wLOI) of fine, intermediate, composite and coarse soils, organic soils and anthropogenic materials (according to
EN 16907 2) after ignition under air at 550°C.
NOTE   The loss of mass suffered by these materials at 550 °C is usually due to the release of volatile compounds, water (absorbed, crystalized or structural) and gases from decomposition of organic matter and inorganic substances such as sulfur, sulfides or hydroxides (e.g. H2O, CO2, SO2).
A method is given in Annex B in order to estimate the organic matter content (COM) from the value of wLOI for clayey soils.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-1:2023(Main)
Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test (ISO 22476-1:2022)
SIST EN ISO 22476-1:2023

This document establishes equipment, procedural and reporting requirements and recommendations on cone and piezocone penetration tests.
NOTE       This document fulfils the requirements for cone and piezocone penetration tests as part of geotechnical investigation and testing according to the EN 1997 series.
This document specifies the following features:
a)    type of cone penetration test;
b)    cone penetrometer class according to Table 2;
c)    test categories according to Table 3;
d)    penetration length or penetration depth;
e)    elevation of the ground surface or the underwater ground surface at the location of the cone penetration test with reference to a datum;
f)     location of the cone penetration test relative to a reproducible fixed location reference point;
g)    pore pressure dissipation tests.
This document covers onshore and nearshore cone penetration test (CPT). For requirements for offshore CPT, see ISO 19901-8.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17542-1:2022(Main)
Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard
SIST EN 17542-1:2022

This document defines the principle and the methods for the determination of the "degradability coefficient" of rocky material.
The degradability coefficient IDG distinguishes the behaviour of certain rocky material and is used to show the change in the geotechnical characteristics (particle size, clay content, plasticity, etc.) in relation to the characteristics seen immediately following excavation.
Changes in the particle size occur due to the combined action of climatic or geohydrological elements (frost, soaking-drying cycles) and mechanical stress to which it is subjected. In the case of degradable rocky material, this leads to a fairly significant and continuous reduction in the mechanical and geometric characteristics of the works in which they are used.
The two methods developed in this document for the determination of IDG are not equivalent, so any result obtained by this document can refer to the method used.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17542-2:2022(Main)
Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
SIST EN 17542-2:2022

This document defines the principle and the methods for the determination of the "fragmentability coefficient" of rocky material.
The fragmentability coefficient IFR distinguishes the behaviour of certain rocky material and is used to show the change in particle size from the moment than the material is excavated through to its subsequent implementation and in certain cases during its whole service life. Changes in the particle size occur due to the structural resistance of the rock being unable to support the mechanical stress to which it is subjected during its implementation and use.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day