EN 12374:2009
(Main)Packaging - Flexible tubes - Terminology
Packaging - Flexible tubes - Terminology
This standard defines the technical vocabulary in German, French and English, widely in use for flexible tubes.
It is applicable to metal, plastic, multilayer or laminated tubes that are used for packing pharmaceutical, cosmetic,
hygiene, food and other domestic or industrial products.
Packmittel - Tuben - Terminologie
Diese Norm definiert die Fachbegriffe in Deutsch, Französisch und Englisch, die für Tuben allgemein benutzt
werden.
Sie gilt für Metall- und Kunststofftuben sowie für mehrschichtige Tuben oder Laminattuben zum Verpacken
von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie von Lebensmitteln und anderen Haushaltsund
Industrieprodukten.
Emballage - Tubes souples - Terminologie
La présente norme définit le vocabulaire technique en allemand, français et anglais, couramment utilisé dans le domaine des tubes souples.
Elle s’applique aux tubes métalliques, plastiques, multicouches ou laminés, qui sont utilisés pour l’emballage de produits pharmaceutiques, cosmétiques, hygiéniques, alimentaires et autres produits industriels ou domestiques.
Embalaža - Prožne tube - Terminologija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Prožne tube - TerminologijaPackmittel - Tuben - TerminologieEmballage - Tubes souples - TerminologiePackaging - Flexible tubes - Terminology55.120Cans. Tins. Tubes01.040.55Pakiranje in distribucija blaga (Slovarji)Packaging and distribution of goods (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 12374:2009SIST EN 12374:2009en,fr,de01-november-2009SIST EN 12374:2009SLOVENSKI
STANDARDSIST EN 12374:20001DGRPHãþD
SIST EN 12374:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12374June 2009ICS 01.040.55; 55.120Supersedes EN 12374:1998
English VersionPackaging - Flexible tubes - TerminologyEmballage - Tubes souples - TerminologiePackmittel - Tuben - TerminologieThis European Standard was approved by CEN on 20 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12374:2009: ESIST EN 12374:2009
EN 12374:2009 (E) 2 Contents Page Foreword . 31Scope . 42Terms and definitions . 43Specific terms for metallic tubes . 44Specific terms for plastics tubes . 115Specific terms for laminated tubes . 16 SIST EN 12374:2009
EN 12374:2009 (E) 3
Foreword This document (EN 12374:2009) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12374:1998. It is based on the professional recommendation of the European tube manufacturers association (etma). It consists of a series of simplified drawings with number codes which identify the various parts and which in turn refer to their definition in the three official languages of CEN. This document includes the following clauses: 2 General definitions; 3 Specific terms for metallic tubes (aluminium, tin); 4 Specific terms for plastics tubes; 5 Specific terms for laminated tubes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12374:2009
EN 12374:2009 (E) 4 1 Scope This standard defines the technical vocabulary in German, French and English, widely in use for flexible tubes. It is applicable to metal, plastic, multilayer or laminated tubes that are used for packin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.