EN ISO 16925:2014
(Main)Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
ISO 16925:2014 specifies a test method for the assessment of the resistance of coatings to pressure water-jetting. The test method simulates the effects pressure water-jetting has on a coating.
Beschichtungsstoffe - Prüfung der Beständigkeit von Beschichtungen gegen Druckwasserstrahl (ISO 16925:2014)
Diese Internationale Norm legt ein Prüfverfahren zum Beurteilen der Beständigkeit von Beschichtungen gegen die Einwirkung eines Druckwasserstrahls fest. Das Prüfverfahren simuliert die Auswirkungen eines Druckwasserstrahls auf eine Beschichtung.
Peintures et vernis - Détermination de la résistance des revêtements à un jet d'eau sous pression (ISO 16925:2014)
L'ISO 16925:2014 spécifie une méthode d'essai pour l'évaluation de la résistance des revêtements à un jet d'eau sous pression. La méthode d'essai simule les effets d'un jet d'eau sous pression sur un produit de peinture.
Barve in laki - Ugotavljanje odpornosti premazov proti curkom vode pod tlakom (ISO 16925:2014)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16925:2014
01-april-2014
Barve in laki - Ugotavljanje odpornosti premazov proti curkom vode pod tlakom
(ISO 16925:2014)
Paints and varnishes - Determination of the resistance of coatings to pressure water-
jetting (ISO 16925:2014)
Beschichtungsstoffe - Prüfung der Beständigkeit von Beschichtungen gegen
Druckwasserstrahl (ISO 16925:2014)
Peintures et vernis - Détermination de la résistance des revêtements à un jet d'eau sous
pression (ISO 16925:2014)
Ta slovenski standard je istoveten z: EN ISO 16925:2014
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 16925:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16925:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 16925:2014
EUROPEAN STANDARD
EN ISO 16925
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2014
ICS 87.040
English Version
Paints and varnishes - Determination of the resistance of
coatings to pressure water-jetting (ISO 16925:2014)
Peintures et vernis - Détermination de la résistance des Beschichtungsstoffe - Prüfung der Beständigkeit von
revêtements à un jet d'eau sous pression (ISO 16925:2014) Beschichtungen gegen Druckwasserstrahl (ISO
16925:2014)
This European Standard was approved by CEN on 20 December 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16925:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16925:2014
EN ISO 16925:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16925:2014
EN ISO 16925:2014 (E)
Foreword
This document (EN ISO 16925:2014) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2014, and conflicting national standards shall be withdrawn at
the latest by August 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16925:2014 has been approved by CEN as EN ISO 16925:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16925:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 16925:2014
INTERNATIONAL ISO
STANDARD 16925
First edition
2014-02-01
Paints and varnishes — Determination
of the resistance of coatings to
pressure water-jetting
Peintures et vernis — Détermination de la résistance des revêtements
à un jet d’eau sous pressio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.