EN 1604:2013
(Main)Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
This European Standard specifies the equipment and procedures for evaluating dimensional changes of test specimens under specified conditions of temperature, relative humidity and duration of exposure. This European Standard proposes a range of conditions from which one or more desirable test conditions can be selected. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität bei definierten Temperatur- und Feuchtebedingungen
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Dimensionsänderungen von Probekörpern bei definierten Temperatur und Feuchtebedingungen und Dauer der Beanspruchung fest. Diese Norm gibt einen Bereich von Bedingungen an, aus denen eine oder mehrere zweckmäßige Prüfbedingungen ausgewählt werden können. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiées
La présente Norme Européenne prescrit l'équipement et les modes opératoires permettant d'évaluer les variations dimensionnelles d'éprouvettes dans des conditions spécifiées de température, d'humidité relative et de durée d'exposition. Elle propose une gamme de conditions parmi lesquelles une ou plusieurs conditions d'essais désirées peuvent être choisies. Elle s’applique aux produits isolants thermiques.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri predpisani temperaturi in relativni vlažnosti zraka
Ta evropski standard določa opremo in postopke za ocenjevanje dimenzijskih sprememb testnih vzorcev pri določenih pogojih, kot je temperatura, relativna vlažnost in trajanje izpostavljenosti. Ta evropski standard predlaga vrsto pogojev, od katerih lahko izberete enega ali več želenih testnih pogojev. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri predpisani temperaturi in relativni vlažnosti zrakaWärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität bei definierten Temperatur- und FeuchtebedingungenProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiéesThermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 1604:2013SIST EN 1604:2013en,fr,de01-julij-2013SIST EN 1604:2013SLOVENSKI
STANDARDSIST EN 1604:1997/AC:1999SIST EN 1604:1997/A1:2007SIST EN 1604:19971DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1604
March 2013 ICS 91.100.60 Supersedes EN 1604:1996English Version
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiées
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität bei definierten Temperatur- und Feuchtebedingungen This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1604:2013: ESIST EN 1604:2013
The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings, but it may also be used in other areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 1604:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.