EN ISO 17663:2009
(Main)Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009)
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009)
ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels, but can be used for other materials, as appropriate.
ISO 17663:2009 provides guidance for manufacturers that perform heat treatment or produce heat-treated products or components. ISO 17663:2009 can also be used as a basis for assessing the manufacturer in respect to its heat treatment capability.
ISO 17663:2009 is intended to be a flexible framework for the control of heat treatment processes. The fulfilment of a requirement can be waived where justification can be provided that a specific requirement is not applicable to a specific process.
Schweißen - Qualitätsanforderungen zur Wärmebehandlung beim Schweißen und bei verwandten Prozessen (ISO 17663:2009)
Diese Internationale Norm bestimmt Qualitätsanforderungen für die Wärmebehandlungen an Luft oder in überwachter Atmosphäre, die in den Werkstätten oder auf den Baustellen in Verbindung mit dem Schweißen oder Umformen ausgeführt werden. Sie gilt hauptsächlich für ferritische Stähle, darf jedoch für andere Werkstoffe eingesetzt werden, so weit anwendbar.
Diese Internationale Norm stellt den Herstellern, die Wärmebehandlungen durchführen oder wärmebehandelte Erzeugnisse oder Teile fertigen, einen Leitfaden zur Verfügung. Diese Internationale Norm kann auch als Grundlage für die Beurteilung des Herstellers für seine Eignung zur Wärmebehandlung verwendet werden.
Auf das Erfüllen einer Anforderung kann verzichtet werden, wenn ein spezieller Prozess nicht für diese besondere Anforderung anwendbar ist. Diese Internationale Norm liefert einen flexiblen Rahmen für:
- besondere Anforderungen bei einer Wärmebehandlung durch den Hersteller, der ein Qualitätssystem nach ISO 9001 besitzt;
- besondere Anforderungen bei einer Wärmebehandlung durch den Hersteller, der ein anderes Qualitätssystem als das nach ISO 9001 besitzt;
- einen besonderen Leitfaden für einen Hersteller, der ein Qualitätskontrollsystem für die Wärme-behandlung entwickelt;
- einen besonderen Leitfaden zur Wärmenachbehandlung von Schweißungen durch Hersteller, die nach ISO 3834 2 oder ISO 3834 3 arbeiten;
- genaue Anforderungen für Spezifikationen, Regeln oder Produktnormen, die eine Kontrolle der Wärme-behandlungsaktivitäten fordern.
Soudage - Exigences de qualité relatives au traitement thermique associé au soudage et aux techniques connexes (ISO 17663:2009)
L'ISO 17663:2009 spécifie des exigences de qualité relatives au traitement thermique à l'air libre ou en atmosphères contrôlées, appliqué en atelier ou sur chantier en soudage et en formage. Ce traitement s'applique principalement aux aciers ferritiques, mais peut être utilisé pour d'autres matériaux, le cas échéant.
L'ISO 17663:2009 fournit des directives aux constructeurs et aux fabricants qui réalisent un traitement thermique ou qui fabriquent des produits ou des pièces traités thermiquement. La présente Norme internationale peut également servir de base pour évaluer la compétence d'un constructeur ou d'un fabricant dans le domaine du traitement thermique.
L'ISO 17663:2009 est censée être un cadre souple pour la maîtrise des traitements thermiques. La réalisation d'une exigence peut être écartée si la justification peut être fournie qu'une exigence spécifique ne s'applique pas à un traitement spécifique.
Varjenje - Kakovostne zahteve za toplotno obdelavo v povezavi z varjenjem in sorodnimi postopki (ISO 17663:2009)
Ta mednarodni standard zagotavlja kakovostne zahteve za toplotno obdelavo v zračni ali nadzorovani atmosferi, ki se izvaja v delavnicah in na mestu v povezavi z varjenjem in oblikovanjem. V glavnem velja za feritna jekla, po potrebi pa se lahko uporabi tudi za druge materiale. Ta mednarodni standard zagotavlja vodilo za proizvajalce, ki izvajajo toplotno obdelavo ali proizvajajo toplotno obdelane proizvode ali komponente. Ta mednarodni standard se lahko uporabi tudi kot osnova za ocenjevanje proizvajalcev v zvezi z njihovo zmogljivostjo toplotne obdelave. Izpolnitvi zahtev se lahko odreče pod pogojem, da posebna zahteva ne velja za določen postopek. Ta mednarodni standard predstavlja fleksibilni okvir, ki zagotavlja – posebne zahteve za toplotno obdelavo, ki proizvajalcu omogočajo sistem kakovosti v skladu z ISO 9001; - posebne zahteve za toplotno obdelavo v specifikacijah, ki zahtevajo od proizvajalca sistem obvladovanja kakovosti za toplotno obdelavo; - posebno vodilo za toplotno obdelavo po varjenju za proizvajalce, ki želijo sprejeti ISO 3834-2 ali ISO 3834-3; - podrobne zahteve za specifikacije, pravila ali standarde za proizvode, ki zahtevajo nadzor toplotne obdelave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2010
1DGRPHãþD
SIST CR ISO 17663:2001
Varjenje - Kakovostne zahteve za toplotno obdelavo v povezavi z varjenjem in
sorodnimi postopki (ISO 17663:2009)
Welding - Quality requirements for heat treatment in connection with welding and allied
processes (ISO 17663:2009)
Schweißen - Qualitätsanforderungen zur Wärmebehandlung beim Schweißen und bei
verwandten Prozessen (ISO 17663:2009)
Soudage - Exigences de qualité relatives au traitement thermique associé au soudage et
aux techniques connexes (ISO 17663:2009)
Ta slovenski standard je istoveten z: EN ISO 17663:2009
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17663
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 25.160.01 Supersedes CR ISO 17663:2001
English Version
Welding - Quality requirements for heat treatment in connection
with welding and allied processes (ISO 17663:2009)
Soudage - Exigences de qualité relatives au traitement Schweißen - Qualitätsanforderungen zur
thermique associé au soudage et aux techniques connexes Wärmebehandlung beim Schweißen und bei verwandten
(ISO 17663:2009) Prozessen (ISO 17663:2009)
This European Standard was approved by CEN on 27 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17663:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 17663:2009) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding”, the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn
at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CR ISO 17663:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17663:2009 has been approved by CEN as a EN ISO 17663:2009 without any modification.
INTERNATIONAL ISO
STANDARD 17663
First edition
2009-06-01
Welding — Quality requirements for heat
treatment in connection with welding and
allied processes
Soudage — Exigences de qualité relatives au traitement thermique
associé au soudage et aux techniques connexes
Reference number
ISO 17663:2009(E)
©
ISO 2009
ISO 17663:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 17663:2009(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Review of requirements and technical review. 2
4.1 General. 2
4.2 Review of requirements . 3
4.3 Technical review . 3
5 Subcontracting. 4
6 Personnel. 4
7 Inspection and testing. 4
7.1 General. 4
7.2 Non-destructive testing. 4
7.3 Destructive testing. 4
8 Equipment for heat treatment. 5
8.1 Production and testing equipment . 5
8.2 Description of facilities . 5
8.3 Suitability of equipment . 5
8.4 Verification of heat treatment equipment. 5
8.5 New equipment . 7
8.6 Maintenance . 7
9 Heat treatment activities . 7
9.1 General. 7
9.2 Heat treatment parameters . 7
9.3 Heat-treatment-procedure specification. 8
9.4 Work instructions . 8
9.5 Number of measuring points. 8
9.6 General rules for local post weld heat treatment of pipe work. 9
10 Heat treatment record. 10
11 Non-conformance and corrective actions. 10
12 Quality records. 11
Annex A (informative) Example of local heat treatment. 12
Bibliography . 13
ISO 17663:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17663 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 10, Unification of requirements in the field of metal welding.
This first edition cancels and replaces ISO/TR 17663:2001, which has been technically revised.
Requests for official interpretations of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 10 via your national standards body. A listing of these bodies can be found at
http://www.iso.org.
iv © ISO 2009 – All rights reserved
INTERNATIONAL STANDARD ISO 17663:2009(E)
Welding — Quality requirements for heat treatment in
connection with welding and allied processes
1 Scope
This International Standard provides quality requirements for heat treatment in air or controlled atmospheres
carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels,
but can be used for other materials, as appropriate.
This International Standard provides guidance for manufacturers that perform heat treatment or produce heat-
treated products or components. This International Standard can also be used as a basis for assessing the
manufacturer in respect to its heat treatment capability.
The fulfilment of a requirement can be waived where justification can be provided that a specific requirement
is not applicable to a specific process. This International Standard is intended to be a flexible framework to
provide
⎯ specific requirements for heat treatment by manufacturer in order to have a quality system in accordance
with ISO 9001;
⎯ specific requirements for heat treatment in specifications which require the manufacturer to have a quality
system other than ISO 9001;
⎯
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.