EN 4655:2010

Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 400 MPa

This standard specifies the requirements relating to:
Steel FE-PM1506 (X1CrNiMoAlTi12-10-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bars
a or D <= 200 mm
Rm >= 1 400 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgehärtet - Stangen - a oder D ≤ 200 mm - Rm ≥ 1 400 MPa

Série aérospatiale - Acier FE-PM1506 (X1CrNiMoAlTi12-10-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres - a ou D ≤ 200 mm - Rm ≥ 1 400 MPa

Aeronavtika - Jeklo FE-PM1506 (X1CrNiMoAlTi12-10-2) - Palice a ali D < 200 mm - Rm > 1400 MPa, taljene z vakuumsko indukcijo in pretaljene s talilno elektrodo, žarjene v topilu in utrjene

Ta evropski standard določa zahteve, ki se nanašajo na: jeklo FE-PM1506 (X1CrNiMoAlTi12-10-2), taljeno z vakuumsko indukcijo in pretaljeno s talilno elektrodo, žarjeno v topilu in utrjeno, palice a ali D < 200 mm Rm > 1400 MPa, za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 31-Aug-2010
• Withdrawal Date: 30-Mar-2011
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2010
• Completion Date: 01-Sep-2010
• Ref Project: SIST EN 4655:2010 - Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D < 200 mm - Rm > 1400 MPa

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Jeklo FE-PM1506 (X1CrNiMoAlTi12-10-2) - Palice a ali D < 200 mm - Rm > 1400 MPa, taljene z vakuumsko indukcijo in pretaljene s talilno elektrodo, žarjene v topilu in utrjeneLuft- und Raumfahrt - Stahl FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgehärtet - Stangen - a oder D < 200 mm - Rm > 1400 MPaSérie aérospatiale - Acier FE-PM1506 (X1CrNiMoAlTi12-10-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres - a ou D < 200 mm - Rm > 1400 MPaAerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D < 200 mm - Rm > 1400 MPa49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4655:2010SIST EN 4655:2010en01-december-2010SIST EN 4655:2010SLOVENSKI
STANDARD



SIST EN 4655:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4655
September 2010 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 400 MPa
Série aérospatiale - Acier FE-PM1506 (X1CrNiMoAlTi12-10-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres - a ou D ≤ 200 mm - Rm ≥ 1 400 MPa
Luft- und Raumfahrt - Stahl FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgehärtet - Stangen - a oder D ≤ 200 mm - Rm ≥ 1 400 MPa This European Standard was approved by CEN on 19 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4655:2010: ESIST EN 4655:2010



EN 4655:2010 (E) 2 Contents Page Foreword . 3Introduction . 41 Scope . 42 Normative references . 4 SIST EN 4655:2010



EN 4655:2010 (E) 3 Foreword This document (EN 4655:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
...