prEN 10379
(Main)Steel sheet piles - Test methods
Steel sheet piles - Test methods
This document specifies the requirement for testing of special properties of hot-rolled steel sheet piles.
Spundbohlen aus Stahl - Prüfverfahren
Dieses Dokument legt die Anforderungen an spezielle Prüfverfahren für warmgewalzte Spundbohlen fest.
Palplanches en acier - Méthodes d’essais
Le présent document spécifie les prescriptions relatives aux essais des propriétés spéciales des palplanches en acier laminées à chaud.
Jeklena obešala - Preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 10379:2024
01-maj-2024
Jeklena obešala - Preskusne metode
Steel sheet piles - Test methods
Spundbohlen aus Stahl - Prüfverfahren
Palplanches en acier - Méthodes d’essais
Ta slovenski standard je istoveten z: prEN 10379
ICS:
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10379:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10379:2024
---------------------- Page: 2 ----------------------
oSIST prEN 10379:2024
DRAFT
EUROPEAN STANDARD
prEN 10379
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2024
ICS 77.140.50
English Version
Steel sheet piles - Test methods
Spundbohlen aus Stahl - Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 3.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10379:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10379:2024
prEN 10379:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 4
5 Test of the resistance of crimped points of U-shaped sheet piles . 4
5.1 General. 4
5.2 Test specimen . 5
5.3 Testing and evaluation. 7
6 Test of the interlock resistance of straight web sheet piles . 8
6.1 General. 8
6.2 Test specimen . 8
6.3 Testing and evaluation. 9
7 Test of interlock performance of U-shaped and Z-shaped sheet piles . 10
7.1 General.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.