prEN ISO 18393-1

Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose-fill insulation for ventilated attics, humidity and temperature cycling

ISO 18393-1:2012 specifies a test method for the determination of settlement of blown loose-fill insulation applied horizontally in ventilated attics.

Wärmedämmprodukte ¿ Bestimmung der Alterung durch Setzung ¿ Teil 1: Eingeblasene lose Wärmedämmstoffe für belüftete Dachgeschosse, zyklische Luftfeuchte- und Temperaturbeanspruchungen

Produits isolants thermiques - Détermination du tassement après vieillissement - Partie 1: Isolant en vrac soufflé pour combles ventilés après simulation de cycles de température et d’humidité (ISO/DIS 18393-1:2022)

L'ISO 18393-1 :2012 spécifie une méthode d'essai pour déterminer le tassement des fibres en vrac soufflées, en pose horizontale dans les combles ventilés.

Toplotnoizolacijski proizvodi - Določanje staranja s posedanjem - 1. del: Vpihana nevezana izolacija za prezračevana podstrešja, ki simulira nihanje vlažnosti in temperature (ISO/DIS 18393-1:2022)

General Information

• Status: Not Published
• Publication Date: 08-Jul-2024
• ICS: 91.120.10 - Thermal insulation of buildings
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 1 - Common general test methods
• Current Stage: 3098 - Decision to reject - Consensus building
• Completion Date: 04-Jun-2021
• Ref Project: oSIST prEN ISO 18393-1:2022 - Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 18393-1:2022
01-julij-2022
Toplotnoizolacijski proizvodi - Določanje staranja s posedanjem - 1. del: Vpihana
nevezana izolacija za prezračevana podstrešja, ki simulira nihanje vlažnosti in
temperature (ISO/DIS 18393-1:2022)
Thermal insulation products - Determination of ageing by settlement - Part 1: Blown
loose fill insulation for ventilated attics simulating humidity and temperature cycling
(ISO/DIS 18393-1:2022)
Wärmedämmprodukte - Bestimmung der Alterung durch Setzung - Teil 1: Eingeblasene
lose Wärmedämmstoffe für belüftete Dachgeschosse, zyklische Luftfeuchte- und
Temperaturbeanspruchungen (ISO/DIS 18393‑1:2022)
Produits isolants thermiques - Détermination du tassement après vieillissement - Partie
1: Isolant en vrac soufflé pour combles ventilés après simulation de cycles de
température et d’humidité (ISO/DIS 18393-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 18393-1
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
oSIST prEN ISO 18393-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18393-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18393-1:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18393-1
ISO/TC 163/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-06-09 2022-09-01
Thermal insulation products — Determination of ageing by
settlement —
Part 1:
Blown loose fill insulation for ventilated attics simulating
humidity and temperature cycling
ICS: 91.120.10; 91.120.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18393-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18393-1:2022
ISO/DIS 18393-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18393-1:2022
ISO/DIS 18393-1:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test equipment .2
5.1 Specimen container . 2
5.2 Climate chamber . 2
6 Test specimens . 2
6.1 Preparations of test specimens . 2
6.2 Number of test specimens . 2
6.3 Conditioning of test specimens . 2
7 Test procedure .3
8 Calculations and expression of results . 3
9 Accuracy of measurement.4
10 Test report . 4
Bibliography . 5
iii
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 18393-1:2022
ISO/DIS 18393-1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
EN ISO 18393-1 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy
use in the built environment, Subcommittee SC 1, Test and measurement methods.
EN ISO 18393 consists of the following parts, under the general title Thermal insulation products —
Determination of ageing by settlement:
Part 1: Blown loose-fill insulation for ventilated attics simulating humidity and temperature cycling
Part 2: Blown loose fill and injected insulation for cavity walls and timber and steel framed walls,
simulating vibration
Part 3: Blown or injected insulation for closed cavities, simulating humidity and temperature cycling
Part 4: Blown loose-fill insulation for ventilated attics and ceilings simulating vibration
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 18393-1:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 18393-1:2022(E)
Thermal insulation products — Determination of agei
...