EN ISO 10088:2013
(Main)Small craft - Permanently installed fuel systems (ISO 10088:2013)
Small craft - Permanently installed fuel systems (ISO 10088:2013)
ISO 10088:2013 specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems as installed for internal combustion engines.
It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and outboard-powered small craft of up to 24 m hull length.
Requirements for the design, materials, construction and testing of permanently installed fixed fuel tanks are given in ISO 21487.
Kleine Wasserfahrzeuge - Dauerhaft installierte Kraftstoffsysteme (ISO 10088:2013)
Diese Internationale Norm legt die Anforderungen an Gestaltung, Werkstoffe, Konstruktion, Installation und Prüfungen für dauerhaft installierte Kraftstoffsysteme für Hubkolben-Verbrennungsmotoren fest.
Sie findet Anwendung auf alle dauerhaft installierten Kraftstoffsysteme für Dieselkraftstoff und Ottokraftstoff und zwar von der Kraftstofffüllöffnung bis zu der Verbindungsstelle mit dem Antriebs- oder Hilfsmotor für durch Einbau- und Außenbordmotoren angetriebene kleine Wasserfahrzeuge bis 24 m Rumpflänge.
Anforderungen an die Ausführung, Werkstoffe, Konstruktion und Prüfung für fest eingebaute Kraftstofftanks liegen in ISO 21487 vor.
Petits navires - Systèmes à carburant installés à demeure (ISO 10088:2013)
L'ISO 10088:2013 spécifie les exigences concernant la conception, les matériaux, la construction, l'installation et les essais des systèmes à carburant installés à demeure et destinés à l'alimentation des moteurs à combustion interne.
Elle s'applique à tous les éléments des systèmes à carburant diesel et essence installés à demeure, depuis le nable de remplissage jusqu'au point de raccordement au(x) moteur(s) de propulsion ou au(x) moteur(s) auxiliaire(s) des petits navires propulsés par un ou des moteurs intérieurs ou hors-bord, et de longueur de coque inférieure ou égale à 24 m.
Les exigences concernant la conception, les matériaux, la construction et les essais des réservoirs fixes à carburant installés à demeure sont données dans l'ISO 21487.
Mala plovila - Trajno vgrajeni sistemi za gorivo (ISO 10088:2013)
Ta mednarodni standard določa zahteve za zasnovo, materiale, izdelavo, vgradnjo in preskušanje trajno vgrajenih sistemov za gorivo, vgrajenih v motorje z notranjim izgorevanjem. Uporablja se za vse dele trajno vgrajenih sistemov za bencinsko in dizelsko gorivo, od odprtine za dovod goriva do točke povezave z vgrajenim ali izvenkrmnim pogonskim ali pomožnim motorjem malih plovil z dolžino trupa do 24 m. Zahteve za zasnovo, materiale, izdelavo in preskušanje trajno vgrajenih stacionarnih rezervoarjev za gorivo so podane v standardu ISO 21487.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2013
1DGRPHãþD
SIST EN ISO 10088:2009
Mala plovila - Trajno vgrajeni sistemi za gorivo (ISO 10088:2013)
Small craft - Permanently installed fuel systems (ISO 10088:2013)
Kleine Wasserfahrzeuge - Dauerhaft installierte Kraftstoffsysteme und fest eingebaute
Kraftstofftanks (ISO 10088:2013)
Petits navires - Systèmes à carburant installés à demeure (ISO 10088:2013)
Ta slovenski standard je istoveten z: EN ISO 10088:2013
ICS:
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10088
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2013
ICS 47.080 Supersedes EN ISO 10088:2009
English Version
Small craft - Permanently installed fuel systems (ISO
10088:2013)
Petits navires - Systèmes à carburant installés à demeure Kleine Wasserfahrzeuge - Dauerhaft installierte
(ISO 10088:2013) Kraftstoffsysteme (ISO 10088:2013)
This European Standard was approved by CEN on 8 June 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10088:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this Standard and the Essential Requirements of
EU Directive 94/25/EC as amended by Directive 2003/44/EC .4
Foreword
This document (EN ISO 10088:2013) has been prepared by Technical Committee ISO/TC 188 "Small craft".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10088:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10088:2013 has been approved by CEN as EN ISO 10088:2013 without any modification.
Annex ZA
(informative)
Relationship between this Standard and the Essential Requirements of
EU Directive 94/25/EC as amended by Directive 2003/44/EC
This standard has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association to provide a means of conforming to Essential Requirements of the New
Approach Directive 94/25/EC as amended by Directive 2003/44/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this standard and EU Directive 94/25/EC as amended by
Directive 2003/44/EC
Clause(s)/sub-clause(s) Essential Requirements (ERs) of Qualifying remarks/Notes
of this standard EU Directive 94/25/EC as amended
by Directive 2003/44/EC
All clauses Annex 1 A, Clause 5.1.1 inboard The clauses in this standard are
engine. limited to the installation of the fuel
system to minimise the risk of fire.
All clauses Annex 1 A, Clause 5.2.1, Fuel system For compliance with Directive
-General 94/25/EC as amended by Directive
2003/44/EC, installations intended
for any fuel with a flash point
below 55 °C shall comply with this
standard’s requirements for petrol
tank compartments.
All clauses Annex 1 A, Clause 5.2.2 Fuel tanks The design and construction of
fuel tanks are covered by
ISO 21487:2012. The clauses in
this standard address the fuel lines
and ventilation of petrol tank
compartments
All clauses Annex 1, Clause 5.6.1 Fire protection The scope of this standard is for
- General permanently installed propulsion or
auxiliary internal combustion
engines. It does not cover the fuel
supply for other types of diesel or
petrol burning appliances but may
be used as a guide for this type of
equipment.
4.1.7, 4.1.8, 4.2.3, 5.2.8 Annex 1 A, Clause 5.8 Discharge
prevention
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 10088
Fourth edition
2013-08-15
Small craft — Permanently installed
fuel systems
Petits navires — Systèmes à carburant installés à demeure
Reference number
ISO 10088:2013(E)
©
ISO 2013
ISO 10088:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 10088:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 3
4.1 Materials and design . 3
4.2 Testing . 4
4.3 Installation . 4
5 Fuel pipes, hoses, connections and accessories . 4
5.1 Fuel filling lines . 4
5.2 Vent lines and components . 5
5.3 Fuel distribution, return and balancing lines . 5
5.4 Hose fittings and hose clamping . 6
5.5 Valves and fittings. 7
5.6 Fuel filters . 7
5.7 Labelling . 7
Annex A (normative) Pressure testing . 8
Bibliography . 9
ISO 10088:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 188, Small craft.
This fourth edition cancels and replaces the third edition (ISO 10088:2009), which has been technically
revised. The major changes concern 4.1.6, 4.3.2, and 5.5.4.
iv © ISO 2013 – All rights reserved
INTERNATIONAL STANDARD ISO 10088:2013(E)
Small craft — Permanently installed fuel systems
1 Scope
This International Standard specifies the requirements for the design, materials, construction, installation
and testing of permanently installed fuel systems as installed for internal combustion engines.
It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the
fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and
outboard-powered small craft of up to 24 m hull length.
Requirements for the design, materials, construction and testing of permanently installed fixed fuel
tanks are given in ISO 21487.
2 Normative references
The following referenced documents are indispensable for the application of this document. For da
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.