Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

This document specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of liquid waste disposal sites, transfer stations and secondary containment, and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of fluids through the construction.
This document is not applicable to geotextiles or geotextile-related products.
This document provides for the evaluation of conformity of the product to this document.
This document defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.

Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe erforderlich sind

Dieses Dokument legt die relevanten Eigenschaften von geosynthetischen Dichtungsbahnen, einschließlich geosynthetischer Kunststoffdichtungsbahnen, geosynthetischer Tondichtungsbahnen und geosynthetischer Bitumendichtungsbahnen, die als Abdichtung beim Bau von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe verwendet werden, und die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Die bestimmungsgemäße Anwendung dieser Produkte besteht im Abdichten gegen das Durchsickern von Wasser durch das Bauwerk.
Dieses Dokument ist nicht anwendbar auf Geotextilien oder geotextilverwandte Produkte.
Dieses Dokument ermöglicht die Konformitätsbewertung des Produktes hinsichtlich dieses Dokuments.
Dieses Dokument legt die Anforderungen fest, die von Herstellern und Händlern in Bezug auf die Darstellung der Produkteigenschaften eingehalten werden müssen.

Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation dans la construction des sites d'évacuation de résidus liquides, des stations de transfert ou enceintes de confinement secondaire

Le présent document spécifie les caractéristiques requises pour les géomembranes polymériques, et bitumineuses et les géosynthétiques bentonitiques destinées à éviter la pénétration de fluides dans la structure des sites d'évacuation de résidus liquides ou des stations de transfert; elle décrit par ailleurs les méthodes d'essai permettant de déterminer ces caractéristiques.
Ces produits ont pour objet d'empêcher les fuites de liquides dans la construction.
Le présent document ne s'applique pas aux géotextiles ou produits apparentés.
Le présent document donne les informations permettant d'évaluer la conformité du produit à ce document.
Le présent document définit les exigences auxquelles les fabricants et distributeurs doivent satisfaire pour la présentation des propriétés du produit.

Geosintetične zapore - Zahtevane lastnosti za uporabo pri konstrukciji odlagališč za tekoče odpadke, prenosnih postaj in drugih zabojnikov

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
16-Jul-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jul-2013
Completion Date
17-Jul-2013

Relations

Buy Standard

Standard
EN 13492:2005
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern und Auffangbecken für flüssige Abfallstoffe erforderlich sindGéomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation dans la construction des sites d'évacuation de résidus liquides, des stations de transfert ou enceintes de confinement secondaireGeosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment59.080.70GeotekstilijeGeotextiles13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 13492:2004SIST EN 13492:2005en01-marec-2005SIST EN 13492:2005SLOVENSKI
STANDARD



SIST EN 13492:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13492September 2004ICS 59.080.70; 91.100.50 English versionGeosynthetic barriers - Characteristics required for use in theconstruction of liquid waste disposal sites, transfer stations orsecondary containmentBarrières géosynthétiques - Caractéristiques requises pourl'utilisation dans la construction des ouvrages de stockageet d'enfouissement de déchets liquides, des stations detransfert ou de stockage secondaireGeosynthetische Dichtungsbahnen - Eigenschaften, die fürdie Anwendung beim Bau von Deponien für flüssigeAbfälle, Zwischenlagern und Auffangbecken für flüssigeAbfallstoffe erforderlich sindThis European Standard was approved by CEN on 17 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13492:2004: ESIST EN 13492:2005



EN 13492:2004 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Definitions and abbreviations.8 3.1 Definitions.8 3.2 Abbreviations.9 4 Required characteristics and corresponding methods of test.9 4.1 General.9 4.2 Relevant characteristics.9 4.3 Characteristics relevant to specific conditions of use.12 4.3.1 Tear strength.12 4.3.2 Bursting strength.12 4.3.3 Friction characteristics (direct shear and incline
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.