EN ISO 14544:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013)

ISO 14544:2013 specifies the conditions for determination of compression properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C.
ISO 14544:2013 applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D), and tridirectional (xD, with 2 < x ≤ 3), loaded along one principal axis of reinforcement.

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur - Bestimmung der Eigenschaften unter Druck (ISO 14544:2013)

Céramiques techniques - Propriétés mécaniques des céramiques composites à haute température - Détermination des caractéristiques en compression (ISO 14544:2013)

L'ISO 14544:2013 spécifie les conditions de détermination des caractéristiques en compression des matériaux composites à matrice céramique et à renfort continu pour des températures allant jusqu'à 2 000 °C.
L'ISO 14544:2013 s'applique à tous les composites à matrice céramique à renfort continu, unidirectionnel (1D), bidirectionnel (2D), et tridirectionnel (xD, avec 2 < x ≤ 3) sollicités suivant un axe principal de renfort.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Mehanske lastnosti keramičnih kompozitov pri visoki temperaturi - Ugotavljanje lastnosti pri stiskanju (ISO 14544:2013)

Ta mednarodni standard opredeljuje pogoje za določanje lastnosti keramičnih matričnih kompozitnih materialov pri stiskanju pri temperaturah do 2000 °C. Ta mednarodni standard se uporablja za vse keramične matrične kompozitne materiale z neprekinjeno ojačitvijo vlaken, enosmerno (1D), dvosmerno (2D) in trismerno (xD, kjer je 2 < x ≤ 3), naloženih vzdolž ene glavne osi ojačitve.
Razlikuje se med dvema vrstama stiskanja:
a) stiskanje med stiskalnimi valji;
b) stiskanje z ročaji.

General Information

• Status: Published
• Publication Date: 26-Apr-2016
• Withdrawal Date: 30-Oct-2016
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/SC 1 - Ceramic composites
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Apr-2016
• Due Date: 22-Nov-2016
• Completion Date: 27-Apr-2016
• Ref Project: SIST EN ISO 14544:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013)

Relations

• Replaces: EN 12290:2005 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
• Effective Date: 04-May-2016
• Replaces: EN 12291:2003 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
• Effective Date: 17-Dec-2014
• Revised: prEN ISO 14544 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compressive properties (ISO/DIS 14544:2024)
• Effective Date: 15-Dec-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2016
1DGRPHãþD
SIST EN 12290:2005
SIST EN 12291:2004
)LQDNHUDPLNDVRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND0HKDQVNH
ODVWQRVWLNHUDPLþQLKNRPSR]LWRYSULYLVRNLWHPSHUDWXUL8JRWDYOMDQMHODVWQRVWLSUL
VWLVNDQMX,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical
properties of ceramic composites at high temperature - Determination of compression
properties (ISO 14544:2013)
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei hoher Temperatur - Bestimmung der Eigenschaften unter Druck
(ISO 14544:2013)
Céramiques techniques - Propriétés mécaniques des céramiques composites à haute
température - Détermination des caractéristiques en compression (ISO 14544:2013)
Ta slovenski standard je istoveten z: EN ISO 14544:2016
ICS:
81.060.30 Sodobna keramika Advanced ceramics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 14544
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 12290:2005, EN 12291:2003
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Mechanical properties of ceramic composites
at high temperature - Determination of compression
properties (ISO 14544:2013)
Céramiques techniques - Propriétés mécaniques des Hochleistungskeramik - Mechanische Eigenschaften
céramiques composites à haute température - von keramischen Verbundwerkstoffen bei hoher
Détermination des caractéristiques en compression Temperatur - Bestimmung der Eigenschaften unter
(ISO 14544:2013) Druck (ISO 14544:2013)
This European Standard was approved by CEN on 18 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14544:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
The text of ISO 14544:2013 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 14544:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 12291:2003, EN 12290:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14544:2013 has been approved by CEN as EN ISO 14544:2016 without any modification.

INTERNATIONAL ISO
STANDARD 14544
First edition
2013-07-01
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Mechanical properties of ceramic
composites at high temperature —
Determination of compression
properties
Céramiques techniques — Propriétés mécaniques des céramiques
composites à haute température — Détermination des
caractéristiques en compression
Reference number
ISO 14544:2013(E)
©
ISO 2013
ISO 14544:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 14544:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Apparatus . 4
5.1 Test machine . 4
5.2 Load train. 4
5.3 Gastight test chamber . 4
5.4 Set-up for heating . 5
5.5 Extensometer . 5
5.6 Temperature measurement . 5
5.7 Data recording system . 5
5.8 Micrometers . 6
6 Test specimens. 6
6.1 General . 6
6.2 Compression between platens . 6
6.3 Test specimen used with grips . 7
7 Test specimen preparation .10
7.1 Machining and preparation .10
7.2 Number of test specimens .10
8 Test procedures .11
8.1 Test set-up: temperature considerations .11
8.2 Test set-up: other considerations .11
8.3 Testing technique .12
8.4 Test validity .13
9 Calculation of results .13
9.1 Test specimen origin .13
9.2 Compression strength .13
9.3 Strain at maximum compression force .14
9.4 Proportionality ratio or pseudo-elastic modulus, elastic modulus .14
10 Test report .16
Annex A (normative) Buckling: How to proceed when buckling is suspected .17
Bibliography .18
ISO 14544:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
...