EN 12365-1:2003

Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification

This part 1 of prEN 33/WI131 specifies the performance requirements and method for the assessment of the properties of all forms of gaskets and weatherstripping both for glazing and for draft and weather sealing purposes. The relevant requirements are applicable to gaskets and weatherstripping of all materials. This European Standard is not applicable to sealants, mastics or putties or any such materials which are extruded in liquid or viscous form into the final place of use.

Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 1: Anforderungen und Klassifizierung

Die vorliegende Produktnorm EN WI 33 131 legt Anforderungen und Verfahren für die Beurteilung der Eigenschaften aller Formen von Dichtungen und Dichtungsprofilen sowohl für die Verglasung als auch für die Abdichtung gegen Zugluft und Witterungseinflüsse fest. Die wesentlichen Anforderungen gelten für alle Dichtungen und Dichtungsprofile aus allen Materialien. Diese Norm gilt nicht für Abdichtmittel, Mastix, Fensterkitt oder ähnliche Materialien, die in flüssiger oder viskoser Form am Einsatzort eingepreßt werden.

Quincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenêtres, fermetures et façades rideaux - Partie 1: Exigences de performance et classification

La présente partie de l'EN 12365 spécifie les exigences de performance et des profilés d'étanchéité de vitrage et entre ouvrant et dormant aux fins de contrôle du passage de l'air, de l'eau, du bruit et d'énergie entre les parties fixes et ouvrantes de portes, de fenêtres, de fermetures et de façades rideaux.
Les exigences de performance générales de la présente partie de l'EN 12365 s'appliquent aux profilés d'étanchéité de vitrage et entre ouvrant et dormant quels que soient les matériaux.
La présente partie de l'EN 12365 ne s'applique pas aux matériaux d'étanchéité, mastics ou tout autre matériau extrudé sous forme liquide ou visqueuse sur le lieu final d'utilisation.

Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 1. del: Zahteve za obnašanje in razvrščanje

General Information

• Status: Published
• Publication Date: 16-Sep-2003
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 4 - Building hardware
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 08-Mar-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12365-1:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification

Relations

• Child: EN 12365-3:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method
• Effective Date: 22-Dec-2008
• Child: EN 12365-4:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method
• Effective Date: 22-Dec-2008
• Child: EN 12365-2:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 1: Anforderungen und KlassifizierungQuincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenetres, fermetures et façades rideaux - Partie 1: Exigences de performance et classificationBuilding hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12365-1:2003SIST EN 12365-1:2003en,fr,de01-november-2003SIST EN 12365-1:2003SLOVENSKI
STANDARD



SIST EN 12365-1:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12365-1September 2003ICS 91.060.50; 91.190English versionBuilding hardware - Gasket and weatherstripping for doors,windows, shutters and curtain walling - Part 1: Performancerequirements and classificationQuincaillerie pour le bâtiment - Profilés d'étanchéité devitrage et entre ouvrant et dormant pour portes, fenêtres,fermetures et façades rideaux - Partie 1: Exigences deperformance et classificationBaubeschläge - Dichtungen und Dichtungenprofile fürFenster, Türen und andere Abschlüsse sowie vorgehängteFassaden - Teil 1: Anforderungen und KlassifizierungThis European Standard was approved by CEN on 1 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12365-1:2003 ESIST EN 12365-1:2003



EN 12365-1:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Classification.54.1Coding system.54.2Category of use (first digit).64.3Working range (second digit).64.4Linear compression force (third digit).64.5Working temperature range (fourth digit).74.6Deflection recovery (fifth digit).74.7Recovery after ageing (sixth digit).74.8Examples of classification.85General requirements.86Methods of test.96.1Compression test.
...