EN ISO 3266:2010
(Main)Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
ISO 3266:2010 specifies the general characteristics, performance and critical dimensions necessary for interchangeability and compatibility with other components, of forged steel eyebolts grade 4 for general lifting purposes. These eyebolts can be used for axial and inclined loading.
ISO 3266:2010 specifies the dimensions of the eyes of eyebolts permitting direct connection with shackles of the same working load limit as those defined in ISO 2415. These dimensions also allow designs with a larger eye which can permit direct connection with sling hooks of similar working load limit.
ISO 3266:2010 covers all significant hazards, hazardous situations and events relevant to eyebolts grade 4.
ISO 3266:2010 is applicable to eyebolts grade 4 for use in the temperature range of -20 ºC to 200 ºC.
ISO 3266:2010 is not applicable to eyebolts which are not forged in one piece.
ISO 3266:2010 is not applicable to forged steel eyebolts grade 4 manufactured before the date of its publication as an International Standard.
Geschmiedete Ringschrauben aus Stahl, Güteklasse 4, für allgemeine Hebezwecke (ISO 3266:2010)
Diese Internationale Norm legt die allgemeinen Eigenschaften, die Leistungsfähigkeit und die wesentlichen Maße von geschmiedeten Ringschrauben der Güteklasse 4 für allgemeine Hebezwecke fest, die für die Austauschbarkeit und Kompatibilität mit anderen Bauteilen erforderlich sind. Diese Ringschrauben können für Geradzug und Schrägzug verwendet werden.
Die Maße der Ösen der Ringschrauben nach dieser Internationalen Norm sind derart festgelegt, dass eine direkte Verbindung mit Schäkeln nach ISO 2415 von gleicher Tragfähigkeit möglich ist. Die Maße erlauben auch Ausführungen mit größeren Ösen, um eine direkte Verbindung mit Anschlaghaken ähnlicher Tragfähig-keit zu ermöglichen.
Diese Internationale Norm enthält im Abschnitt 4 alle wesentlichen Gefährdungen, gefährlichen Situationen und Ereignisse, die für Ringschrauben der Güteklasse 4 erforderlich sind.
Diese Internationale Norm gilt für Ringschrauben der Güteklasse 4, welche in einem Temperaturbereich von °20 °C bis 200 °C anzuwenden sind.
Diese Internationale Norm ist nicht für Ringschrauben anwendbar, die nicht in einem Stück geschmiedet sind.
Diese Internationale Norm ist nicht für geschmiedete Ringschrauben der Güteklasse 4 anwendbar, die vor der Veröffentlichung dieser Norm hergestellt wurden.
Anneaux à tige de classe 4 en acier forgé pour applications générales de levage (ISO 3266:2010)
L'ISO 3266:2010 spécifie les caractéristiques générales, les performances et les dimensions critiques nécessaires pour assurer l'interchangeabilité et la compatibilité avec d'autres composants des anneaux à tige de classe 4 en acier forgé pour applications générales de levage. Ces anneaux à tige peuvent être utilisés pour le levage vertical ou incliné.
L'ISO 3266:2010 spécifie les dimensions de l'oeil des anneaux à tige permettant un engagement direct avec des manilles de même charge maximale d'utilisation, comme celle définie dans l'ISO 2415. Ces dimensions permettent également de concevoir des modèles avec un oeil plus grand qui peut permettre l'engagement direct de crochets de levage de charge maximale d'utilisation similaire.
L'ISO 3266:2010 couvre tous les phénomènes dangereux significatifs, les situations dangereuses et les événements applicables aux anneaux à tige de classe 4.
L'ISO 3266:2010 s'applique aux anneaux à tige de classe 4 pour une utilisation dans une plage de températures de -20°C à 200°C.
L'ISO 3266:2010 ne s'applique pas aux anneaux à tige qui ne sont pas forgés d'une seule pièce.
L'ISO 3266:2010 ne s'applique pas aux anneaux à tige de classe 4 en acier forgé fabriqués avant la date de publication de la présente Norme internationale.
Kovani jekleni očesni vijaki (razred izdelave 4) za splošne dvigalne namene (ISO 3266:2010)
Ta mednarodni standard določa splošne značilnosti, delovanje in kritične mere, potrebne za medsebojno zamenljivost in združljivost z drugimi sestavnimi deli, kovanih jeklenih očesnih vijakov (razreda izdelave 4) za splošne dvigalne namene. Ti očesni vijaki se lahko uporabljajo za aksialno in nagibno obremenitev. Ta mednarodni standard določa mere očesa očesnih vijakov, ki omogočajo neposredno povezovanje s kavlji z enako omejitvijo obremenitve kot so tisti, opredeljeni v ISO 2415. Te mere dovoljujejo tudi modele z večjim očesom, ki lahko omogočijo neposredno povezovanje z zankastimi kavlji s podobno omejitvijo delovne obremenitve. Ta mednarodni standard zajema vse bistvene nevarnosti, nevarne situacije in dogodke, pomembne za očesne vijake razreda izdelave 4, kot jih opredeljuje Klavzula 4. Ta mednarodni standard velja za očesne vijake razreda izdelave 4, ki se uporabljajo v temperaturnem razponu med -20 0C in 200 0C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3266:2010
01-oktober-2010
.RYDQLMHNOHQLRþHVQLYLMDNL UD]UHGL]GHODYH ]DVSORãQHGYLJDOQHQDPHQH ,62
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)
Geschmiedete Ringschrauben aus Stahl, Güteklasse 4, für allgemeine Hebezwecke
(ISO 3266:2010)
Anneaux à tige de classe 4 en acier forgé pour applications générales de levage (ISO
3266:2010)
Ta slovenski standard je istoveten z: EN ISO 3266:2010
ICS:
53.020.30 Pribor za dvigalno opremo Accessories for lifting
equipment
SIST EN ISO 3266:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3266:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 3266:2010
EUROPEAN STANDARD
EN ISO 3266
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2010
ICS 53.020.30
English Version
Forged steel eyebolts grade 4 for general lifting purposes (ISO
3266:2010)
Anneaux à tige de classe 4 en acier forgé pour applications Geschmiedete Ringschrauben aus Stahl, Güteklasse 4, für
générales de levage (ISO 3266:2010) allgemeine Hebezwecke (ISO 3266:2010)
This European Standard was approved by CEN on 15 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3266:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3266:2010
EN ISO 3266:2010 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3266:2010
EN ISO 3266:2010 (E)
Foreword
This document (EN ISO 3266:2010) has been prepared by Technical Committee ISO/TC 111 "Round steel
link chains, chain slings, components and accessories" in collaboration with Technical Committee
CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn
at the latest by November 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3266:2010 has been approved by CEN as a EN ISO 3266:2010 without any modification.
3
---------------------- Page: 5 ----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.