iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 230:2005

(Main)

Automatic burner control systems for oil burners

Automatic burner control systems for oil burners

This document specifies the requirements, operating conditions and test methods for burner control systems for automatic and semi-automatic oil burners with or without fans.
It also applies to dual fuel burners, for use with either oil or gaseous fuels, when operating on oil.
This document covers type testing only.
This document also applies to automatic burner control systems, programming units or flame detector devices that include additional functions.
Automatic burner control systems utilising thermo-electric flame supervision devices are not covered by this document.

Feuerungsautomaten für Ölbrenner

In diesem Dokument werden Anforderungen, Betriebsbedingungen und Prüfverfahren für Feuerungen für automatische und halbautomatische Ölbrenner mit oder ohne Gebläse festgelegt.
Sie gilt auch für Öl Zweistoffbrenner, die entweder Öl oder gasförmige Brennstoffe anwenden können für den Fall, dass die Brenner mit Öl betrieben werden.
In diesem Dokument wird nur die Typprüfung behandelt.
Dieses Dokument gilt ferner für Feuerungsautomaten, Steuergeräte oder ihre zugehörigen Flammenwächter, die zusätzliche Funktionen enthalten.
Feuerungsautomaten, die eine thermoelektrische Flammenüberwachung anwenden, sind nicht Gegenstand dieses Dokuments.

Systèmes automatiques de commande et de sécurité pour brûleurs à fioul

Le présent document fixe les exigences, les conditions de fonctionnement et les méthodes d'essai des systèmes de commande et de sécurité pour brûleurs automatiques et semi-automatiques à fioul avec ou sans ventilateur.
Il s'applique également aux brûleurs mixtes, utilisant alternativement le fioul ou les combustibles gazeux, lorsqu'ils fonctionnent au fioul.
Le présent document traite uniquement des essais de type.
Le présent document s'applique également aux systèmes automatiques de commande et de sécurité des brûleurs, aux unités de programmation ou aux dispositifs de détection de flamme comportant des fonctions supplémentaires.
Le présent document ne concerne pas les systèmes automatiques de commande et de sécurité des brûleurs utilisant des dispositifs de détection de flamme thermoélectriques.

Sistemi za avtomatski nadzor za oljne gorilnike

General Information

Status
Withdrawn
Publication Date
14-Jun-2005
Withdrawal Date
22-May-2012
ICS
27.060.10 - Liquid and solid fuel burners
Technical Committee
CEN/TC 47 - Atomizing oil burners and their components - Function - Safety - Testing
Drafting Committee
CEN/TC 47/WG 2 - Revision of EN 230
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-May-2012
Completion Date
23-May-2012
Ref Project
SIST EN 230:2006 - Automatic burner control systems for oil burners

Relations

Replaces
EN 230:1990 - Monobloc oil burners - Safety, control and regulation devices and safety times
Effective Date
22-Dec-2008
Replaces
EN 230:1990/AC:1991 - Monobloc oil burners - Safety, control and regulation devices and safety times
Effective Date
22-Dec-2008
Replaced By
EN 298:2012 - Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
Effective Date
19-Sep-2009

Buy Standard

EN 230:2006EN 230:2006
PreviousNext
Standard
EN 230:2006
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 230:2006
01-januar-2006
1DGRPHãþD
SIST EN 230:2000
SIST EN 230:2000/AC:2000
Sistemi za avtomatski nadzor za oljne gorilnike
Automatic burner control systems for oil burners
Feuerungsautomaten für Ölbrenner
Systemes automatiques de commande et de sécurité pour bruleurs a fioul
Ta slovenski standard je istoveten z: EN 230:2005
ICS:
27.060.10 *RULOQLNLQDWHNRþHLQWUGR Liquid and solid fuel burners
JRULYR
SIST EN 230:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 230:2006

---------------------- Page: 2 ----------------------

SIST EN 230:2006



EUROPEAN STANDARD EN 230

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2005
ICS 27.060.10 Supersedes EN 230:1990
English version
Automatic burner control systems for oil burners
Systèmes automatiques de commande et de sècurité pour Feuerungsautomaten für Ölbrenner
brûleurs à fioul
This European Standard was approved by CEN on 14 February 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 230:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 230:2006
EN 230:2005 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Terms and definitions.6
4 Classification.11
5 Normal conditions for testing and measurement tolerances .13
6 Constructional requirements .13
7 Functional requirements .17
8 Protection against environmental influences.26
9 Protection against internal faults.34
10 Additional requirements for complex electronics .37
11 Marking, installation and operating instructions (see also Annex C).39

Annex A (normative) Electrical/electronic component fault modes tables .42
Annex B (informative) Functional characteristics of burner control systems, to be given by the
appliance standard .45
Annex C (normative) Requirements for DC supplied burner controls.46
Annex D (informative) Functional diagrams of oil burner controls.49
Bibliography.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
prEN 267 rev(Main)
Forced draught burners for liquid fuels
oSIST prEN 267:2012

This European Standard specifies the terminology, the general requirements for the construction and operation of forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to forced draught oil burners supplied with:
―   fuel based on first raffinates and their mixtures with biogenous liquid fuels having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 °C; and
―   higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomization.
This European Standard is applicable to:
―   single burners fitted to a single combustion chamber;
―   single burners fitted to an appliance with additional requirements;
NOTE   When additional requirements apply which are not identified or specified in this standard, the specification of the required safety measures and/or protective devices and compliance with them is outside the scope of this standard.
―   single-fuel and dual-fuel burners when operating on oil only;
―   the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable, see Annex J.
This European Standard also deals with the additional requirements for the burners in the scope with pressurized parts and/or firing pressurized bodies, see Annex K.
This European Standard specifies the requirements to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard deals also with forced draught burners intended to be used with biogenous liquid fuels, mixtures.
This European Standard deals also with burners equipped to increase the total appliance efficiency; see Annex M.

  • Draft
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12514-4(Main)
Parts for supply systems for consuming units with liquid fuels - Part 4: Safety requirements and tests - Pipings and parts within pipelines
oSIST prEN 12514-4:2009

This European Standard applies to the following parts of supply systems for the automatic liquid fuel supply of consuming units from one or more tanks:
a)   pipes;
b)   fasteners;
c)   pipeline connections;
d)   parts within pipes;
Combinations of single parts are acceptable.

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12514-2 rev(Main)
Parts for supply systems for demand appliance with liquid fuels — Part 2: Safety requirements and tests — Feed pumps, control and safety devices, operating vessels
oSIST prEN 12514-2:2009

This European Standard applies to the following parts of supply systems for the automatic supply of liquid fuel to one or more consuming units from one or more tanks:
a)   feed pumps;
b)   control and safety devices;
c)   service tanks;
d)   service vessels.
The combination of single parts is acceptable.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12514-3(Main)
Parts for supply systems for consuming units with liquid fuels - Part 3: Safety requirements and tests - Valves and meters
oSIST prEN 12514-3:2009

This European Standard applies to the following parts of supply systems for the automatic liquid fuel supply of consuming units from one or more tanks:
a)   isolating valve;
b)   quick-acting valve;
c)   switch-over valve;
d)   forced switch-over valve;
e)   check valve;
f)   pressure compensating device;
g)   discharge valve;
h)   pressure reducer;
i)   filter;
j)   meter;
k)   de-aerator;
l)   anti-siphon safety device;
m)   pressure retaining device;
n)   isolation device;
o)   pressure gauge;
p)   vapour/air separator;
q)   pressure control path;
r)   combined part
s)   other part.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12514-1(Main)
Parts for supply systems for consuming units with liquid fuels - Part 1: Safety requirements and tests - Terminology, general requirements
oSIST prEN 12514-1:2009

This European Standard applies to all parts of supply systems for the automatic supply of liquid fuel to one or more consuming units from one or more tanks. It applies to all parts from the tank connection(s) to the connection to the burner or the consuming units, respectively, including the direct series-connected shut-off devices.

  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 267:2009/FprA1(Amendment)
Automatic forced draught burners for liquid fuels
SIST EN 267:2010/kFprA1:2011

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to automatic forced draught oil burners supplied with:
-   a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and
-   higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation.
This European Standard is applicable to:
-   single burners fitted to a single combustion chamber;
-   single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account;
-   single-fuel and dual-fuel burners when operating on oil only;
-   the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J.
It deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K.
This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard does not deal with hazards due to specific applications.
This European Standard deals also with forced draught burners intended to be used with biogenous fuels, mixtures.
This European Standard deals also with burners equipped to increase the total appliance efficiency; see Annex L.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23553-1:2022(Main)
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2022)
SIST EN ISO 23553-1:2022

This document specifies safety, constructional and performance requirements and testing of automatic and semi-automatic valves for oil.
It applies to automatic and semi-automatic valves which are:
—    normally closed;
—    used in combustion plants to interrupt the oil flow with or without delay on closing;
—    for use with oil types (e.g. middle distillate fuel oil, crude oil, heavy fuel oil or kerosene) without gasoline;
NOTE 1    For other oil types (e.g. oil emulsions), additional test methods can be agreed between the manufacturer and the test authority.
NOTE 2    Oil types from petroleum refining processes are classified ISO-F-D in ISO 8216-99 and form part of a device having other function(s), such as oil pumps. In this case, the test methods apply to those parts or components of the device forming the automatic and semi-automatic valves, i.e. those parts which are necessary for the closing function.
—    for use on burners or in appliances using oil;
—    directly or indirectly operated, electrically or by mechanical or hydraulic means;
—    fitted with or without closed-position indicator switches.
This document covers type testing only.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12514:2020/AC:2021(Corrigendum)
Components for supply systems for consuming units with liquid fuels
SIST EN 12514:2020/AC:2021

2021-01-15 - JE- TC - Corrects the wording related to Formula (6) in 5.5.1.2.1.4, 5.5.1.2.2.3, 5.5.1.3.3, 5.5.1.4.3, 5.12.2.1.3, 5.12.2.2.3 and 5.19.20.4.3 + Consolidated text not in XML, as mother standard EN 12514:2020 was not prepared in XML

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12514:2020(Main)
Components for supply systems for consuming units with liquid fuels
SIST EN 12514:2020

This European Standard specifies the safety and performance requirements and tests methods for the components for supply systems. Their intended use is the supply with liquid fuel for one or more consuming units from one or more tanks.
This European Standard applies to pressurised, negative pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply liquid fuels.
The components for supply systems covered by this standard are piping kits/systems and their components.
Not covered by this standard are items belonging to the consuming unit (e. g.: heating/cooling appliances in buildings) and items used for the mounting and support of components.
Not covered by this standard are items with the intended use of gas for building heating/cooling systems and any items of heating networks.
Not covered are items used for drainage (including highways) and disposal of other liquids and gaseous waste, supply of gases, pressure and vacuum systems, communications, sanitary and cleaning fixtures and storage fixtures.

  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 267:2020(Main)
Forced draught burners for liquid fuels
SIST EN 267:2020

This European Standard specifies the terminology, the general requirements for the construction and operation of forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to forced draught oil burners supplied with:
-   fuel based on first raffinates and their mixtures with biogenous liquid fuels having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 °C, and
-   higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomization.
This European Standard is applicable to:
-   single burners fitted to a single combustion chamber;
-   single burners fitted to an appliance with additional requirements;
NOTE   When additional requirements apply which are not identified or specified in this standard, the specification of the required safety measures and/or protective devices and compliance with them is outside the scope of this standard.
-   single-fuel and dual-fuel burners when operating on oil only;
-   the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable, see Annex J.
This European Standard also deals with the additional requirements for the burners in the scope with pressurized parts and/or firing pressurized bodies, see Annex K.
This European Standard specifies the requirements to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard deals also with forced draught burners intended to be used with biogenous liquid fuels, mixtures.
This European Standard deals also with burners and their equipment to increase the total appliance efficiency, see Annex M.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day