iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13924-1:2015

(Main)

Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens

Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens

This part of EN 13924 provides a framework for specifying the properties and relevant test methods for hard paving grade bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.

Bitumen und bitumenhaltige Bindemittel - Anforderungsrahmenwerk für spezielle Straßenbaubitumen - Teil 1: Harte Straßenbaubitumen

Dieser Teil von EN 13924 liefert ein Rahmenwerk für die Festlegung der Eigenschaften und entsprechenden Prüfverfahren für harte Straßenbaubitumen, die zum Bau und zur Instandhaltung von Straßen, Flugplätzen und anderen befestigten Flächen geeignet sind.

Bitumes et liants bitumineux - Cadre de spécifications pour les bitumes routiers spéciaux — Partie 1 : Bitumes routiers de grade dur

Cette partie de l’EN 13924 prescrit un cadre de spécifications des caractéristiques et des méthodes d'essai pour les bitumes routiers de grade dur qui sont destinés à la construction et à l’entretien des routes, des pistes d’aéroport et d’autres chaussées.

Bitumen in bitumenska veziva - Okvirna specifikacija za posebne cestogradbene bitumne - 1. del: Trši cestogradbeni bitumni

Ta del standarda EN 13924 zagotavlja ogrodje za določanje lastnosti in ustreznih preskusnih metod za trde cestogradbene bitumne, ki so primerni za gradnjo in vzdrževanje cest, letališč in drugih asfaltnih površin.

General Information

Status
Published
Publication Date
01-Dec-2015
Withdrawal Date
29-Sep-2017
ICS
93.080.20 - Road construction materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336/WG 1 - Bituminous binders for paving
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
17-Nov-2021
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
Ref Project
SIST EN 13924-1:2016 - Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens

Relations

Replaces
EN 13924:2006/AC:2006 - Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Effective Date
09-Dec-2015
Replaces
EN 13924:2006 - Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Effective Date
09-Dec-2015

Buy Standard

EN 13924-1:2016EN 13924-1:2016
PreviousNext
Standard
EN 13924-1:2016
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za posebne cestogradbene bitumne - 1. del: Trši cestogradbeni bitumniBitumen und bitumenhaltige Bindemittel - Anforderungsrahmenwerk für spezielle Straßenbaubitumen - Teil 1: Harte StraßenbaubitumenBitumes et liants bitumineux - Cadre de spécifications pour les bitumes routiers spéciaux - Partie 1: Bitumes routiers de grade durBitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13924-1:2015SIST EN 13924-1:2016en,fr,de01-februar-2016SIST EN 13924-1:2016SLOVENSKI
STANDARDSIST EN 13924:2006/AC:2007SIST EN 13924:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13924-1
December
t r s w ICS
{ uä r z rä t r Supersedes EN
s u { t vã t r r xEnglish Version
Bitumen and bituminous binders æ Specification framework for special paving grade bitumen æ Part
sã Hard paving grade bitumens Bitumes et liants bitumineux æ Cadre de spßcifications pour les
bitumes routiers spßciaux æ Partie
s ã Bitumes routiers de grade dur
Bitumen und bitumenhaltige Bindemittel æ Anforderungsrahmenwerk für spezielle Straßenbaubitumen æ Teil
sã Harte StraßenbaubitumenThis European Standard was approved by CEN on
u October
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u { t væ sã t r s w ESIST EN 13924-1:2016

Calculation of the penetration index . 17 A.1 General . 17 A.2 Term and definition . 17 A.3 Principle . 17 SIST EN 13924-1:2016

Informative properties . 19 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 20 ZA.1 Scope and relevant characteristics . 20 ZA.2 Procedure for AVCP of hard paving grade bitumens . 21 ZA.2.1 System of AVCP . 21 ZA.2.2 Declaration of performance (DoP) . 22 ZA.3 CE marking and labelling . 25 Bibliography . 29
Figure 1 — European Standards for bitumens According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13924-1:2016
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13588:2017(Main)
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
SIST EN 13588:2018

This European Standard specifies a method for measuring the cohesion of bituminous binders for surface dressing application at temperatures in the range of (- 10 oC) to (+ 80 °C) and for expressing the relationship between cohesion and temperature.
This method is applicable for pure bitumen, modified bitumen and fluxed bitumen; in the case of fluxed bitumen, the test can be performed on the binder containing fluxant or on binder from which the solvent has been removed. For bitumen emulsions, the test is carried out on the residual binder obtained after recovery and the method used to recover the binder should be reported.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15626:2016(Main)
Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
SIST EN 15626:2016

This European Standard specifies a method for the determination of the adhesivity of cut-back and fluxed bituminous binders coated onto aggregate when immersed in water.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. For environmental reasons and to reduce emissions to air, water and soil, it is recommended to limit the use of products, solvents and energy to the minimum required for a valid test result.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13808:2013(Main)
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
SIST EN 13808:2013

This European Standard specifies the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
This European Standard applies to emulsions of bitumen, or of fluxed bitumen, or of cut back bitumen and to emulsions of polymer modified bitumen, or of polymer modified fluxed bitumen, or of polymer modified cut-back bitumen, which also includes latex modified bituminous emulsions.
Within Europe several types of cationic bituminous emulsions are used. Depending on traditional practices, different binder contents may be used for the same purpose. When designing a specification for a particular application, care should be taken to make class selections which are compatible and realistic.
NOTE   For the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    40 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14023:2010(Main)
Bitumen and bituminous binders - Specification framework for polymer modified bitumens
SIST EN 14023:2010

This European Standard provides a framework for specifying the characteristics and relevant test methods for polymer modified bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
This framework covers the following characteristics:
-   "consistency at intermediate service temperature";
-   "consistency at elevated service temperature";
-   "cohesion";
-   "durability" of consistency;
-   "brittleness at low service temperature";
-   "strain recovery".
The cohesion property has been included as a means of discriminating between polymer modified bitumens and other bituminous binders. The other essential requirements, "adhesion" and "setting ability" are indicated by tests carried out on the finished asphalt mixtures.
The introduction of classes of convenience in Table 1, Table 2 and Table 3 enables the selection of the most suitable specification for the bitumen taking account of local conditions of climate and use. The nomenclature of polymer modified bitumens comprises the penetration range and the minimum softening point (see example in Annex A).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    27 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12591:2009(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
SIST EN 12591:2009

This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for evaluation of conformity.
This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumens are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    26 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15626(Main)
Bitumens and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
oSIST prEN 15626:2024

This document specifies a method for the determination of the adhesivity of cut-back and fluxed bituminous binders coated onto aggregate when immersed in water.
The method can be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a cut-back and fluxed bituminous binder. The method can also be used with a specific aggregate as used on a job site.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. For environmental reasons and to reduce emissions to air, water and soil, it is recommended to limit the use of products, solvents and energy to the minimum required for a valid test result.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14023(Main)
Bitumen and bituminous binders - Specification framework for polymer modified bitumens
oSIST prEN 14023:2020

This document provides a framework for specifying a range of characteristics as well as applicable test methods for polymer modified bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with information on assessment and verification of constancy of performance. Polymer modified bitumen is defined in EN 12597.
This document describes the performance for characteristics of polymer modified bitumens, as shown in Table 1 and Table 2. It gives information for Declaration of Performance, selection of the grades, characteristics and test methods.
This framework covers the following essential characteristics:
-   consistency at intermediate service temperature;
-   consistency at elevated service temperature;
-   viscoelastic behaviour;
-   cohesion;
-   resistance to flow and deformation;
-   temperature sensitivity;
-   strain recovery;
-   durability of strain recovery;
-   durability of consistency at low service temperature;
-   durability of viscoelastic behaviour.
The characteristics of "adhesion" and "setting ability" are addressed by tests used on either the finished asphalt mixtures or on aggregate bitumen combinations, i.e. EN 12697-1, EN 12697-11, EN 12697-12, EN 12697-26 [2 to 5], rather than tests on the bitumen itself.
"Adhesion" is addressed by tests carried out on the finished asphalt mixtures.
"Setting ability" is the return of the polymer modified binder to its normal semi solid state as it returns to ambient temperature; this is a natural result of the cooling of the hot polymer modified bitumen after application and thus not addressed here.
The nomenclature of polymer modified bitumen comprises the nominal penetration range and the minimum softening point, e.g. PMB 45/80 60.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12591(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
kSIST prEN 12591:2017

This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for assessment and verification of constancy of performance.
This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumens are specified according to EN 13305, it is underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12591(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
oSIST prEN 12591:2005

This document provides a framework for specifying a range of properties and relevant test methods for bitumens and bituminous binders, together with requirements for evaluation of conformity.
This document does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumen are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this standard, can also be use for industrial applications.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13880-4:2024(Main)
Hot applied joint sealants - Part 4: Test method for the characterization of heat resistance - Change in penetration value
SIST EN 13880-4:2024

This document specifies a method to characterize the heat resistance on samples of hot applied joint sealants according to EN 14188 1 by comparing the cone penetration and resilience values before and after exposure.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day