EN ISO 4618:2023
(Main)Paints and varnishes - Vocabulary (ISO 4618:2023)
Paints and varnishes - Vocabulary (ISO 4618:2023)
This document defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, including corrosion protection (see the ISO 12944 series), coating powders (see ISO 8130-14), electro-deposition coatings (see ISO 22553-1) and rheology (see ISO 3219-1).
Terms on nanotechnologies are harmonized with the ISO 80004 series.
Terms on pigments and extenders are harmonized with ISO 18451-1.
Beschichtungsstoffe - Begriffe (ISO 4618:2023)
Dieses Dokument legt Benennungen fest, die auf dem Gebiet der Beschichtungsstoffe (Lacke, Anstrichstoffe und Rohstoffe für Lacke und Anstrichstoffe) verwendet werden.
Benennungen, die sich auf spezifische Anwendungen und Eigenschaften beziehen, werden in Normen behandelt, die derartige Anwendungen und Eigenschaften betreffen, einschließlich Korrosionsschutz (siehe die Normenreihe ISO 12944), Pulverlacke (siehe ISO 8130 14), Elektrotauchlack (siehe ISO 22553 1) und Rheologie (siehe ISO 3219 1).
Benennungen zur Nanotechnologie sind mit der Normenreihe ISO 80004 abgestimmt.
Benennungen zu Pigmenten und Füllstoffen sind mit ISO 18451 1 abgestimmt.
Peintures et vernis - Vocabulaire (ISO 4618:2023)
Le présent document définit des termes utilisés dans le domaine des produits de peinture (peintures, vernis et matières premières pour les peintures et vernis).
Les termes relatifs aux propriétés et applications particulières sont traités dans les normes pertinentes, notamment la protection contre la corrosion (voir la série ISO 12944), les peintures en poudre (voir l’ISO 8130-14), les peintures d’électrodéposition (voir l’ISO 22553-1) et la rhéologie (voir l’ISO 3219-1).
Les termes relatifs aux nanotechnologies sont harmonisés avec la série ISO 80004.
Les termes relatifs aux pigments et aux charges sont harmonisés avec l’ISO 18451-1.
Barve in laki - Slovar (ISO 4618:2023)
Ta dokument določa izraze, ki se uporabljajo na področju premaznih materialov (barve, laki ter surovine za barve in lake).
Izrazi, ki se nanašajo na specifične načine uporabe in lastnosti, so razloženi v standardih, ki obravnavajo te načine uporabe in lastnosti, vključno s protikorozijsko zaščito (glej skupino standardov ISO 12944), prekrivnimi prahi (glej standard ISO 8130-14), elektrodepozicijskimi premazi (glej standard ISO 22553-1) in reologijo (glej standard ISO 3219-1).
Izrazi, ki se nanašajo na področje nanotehnologije, so usklajeni s skupino standardov ISO 80004.
Izrazi, ki se nanašajo na pigmente in polnila, so usklajeni s standardom ISO 18451-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2023
Nadomešča:
SIST EN ISO 4618:2015
Barve in laki - Slovar (ISO 4618:2023)
Paints and varnishes - Vocabulary (ISO 4618:2023)
Beschichtungsstoffe - Begriffe (ISO 4618:2023)
Peintures et vernis - Vocabulaire (ISO 4618:2023)
Ta slovenski standard je istoveten z: EN ISO 4618:2023
ICS:
01.040.87 Industrija barv (Slovarji) Paint and colour industries
(Vocabularies)
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4618
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 01.040.87; 87.040 Supersedes EN ISO 4618:2014
English Version
Paints and varnishes - Vocabulary (ISO 4618:2023)
Peintures et vernis - Vocabulaire (ISO 4618:2023) Beschichtungsstoffe - Begriffe (ISO 4618:2023)
This European Standard was approved by CEN on 7 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4618:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 4618:2023) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2023, and conflicting national standards shall
be withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4618:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4618:2023 has been approved by CEN as EN ISO 4618:2023 without any modification.
INTERNATIONAL ISO
STANDARD 4618
Third edition
2023-02
Paints and varnishes — Vocabulary
Peintures et vernis — Vocabulaire
Reference number
ISO 4618:2023(E)
ISO 4618:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4618:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography .35
Index .36
iii
ISO 4618:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, in collaboration
with the European Committee for Standardization (CEN) Technical Committee CEN/TC 139, Paints and
varnishes, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This third edition cancels and replaces the second edition (ISO 4618:2014), which has been technically
revised.
The main changes are as follows:
— the title has been changed from “Terms and definitions” to “Vocabulary”;
— the following terms have been added: brush marks, catalyst, clouding, cold checking, conventional
spraying, crater, creeping, dirt-resistant paint, distinctness of image, DOI, drawdown blade, dry
spray, film applicator, flocculate, nanocomposite coating, nanoparticle, particle, pigment-binder
ratio, primary particle, semi-volatile organic compound, semi-volatile organic compound content,
SVOC, SVOC content, SVOCC;
— the following terms have been deleted: after tack, brush-drag, bubbling, cratering, cutting-in,
dilatant flow behaviour, flash point, flocculation, flow properties, graining, marbling, pseudoplastic
flow behaviour, rheopexy, rheopectic behaviour, rust back, shear-thickening flow behaviour, shear-
thinning behaviour, sheen, tack-free, thixotropic behaviour, thixotropy, UV-curing, viscoelasticity,
viscosity, yield point, yield stress, yield value;
— many definitions have been amended;
— the text has been editorially revised and the bibliography and scope have been updated.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
INTERNATIONAL STANDARD ISO 4618:2023(E)
Paints and varnishes — Vocabulary
1 Scope
This document defines terms used in the field of coating materials (paints, varnishes and raw materials
for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those
applications and properties, including corrosion protection (see the ISO 12944 series), coating powders
(see ISO 8130-14), electro-deposition coatings (see ISO 22553-1) and rheology (see ISO 3219-1).
Terms on nanotechnologies are harmonized with the ISO 80004 series.
Terms on pigments and extenders are harmonized with ISO 18451-1.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
abrasion
process of removing matter or deformation of a surface by friction as a result of
rubbing
3.2
abrasion
process of removing matter in the surface as a result of friction or impact
3.3
accelerator
additive (3.6) to increase the speed of chemical reactions
3.4
acid value
mass in milligrams of potassium hydroxide (KOH) required to neutralize 1 g of a sample under specified
test conditions
3.5
acrylic resin
synthetic resin (3.249) resulting from the polymerization or copolymerization of acrylic and/or
methacrylic monomers, frequently together with other monomers
ISO 4618:2023(E)
3.6
additive
substance, which, when added in small quantities to a coating material (3.48), improves or modifies one
or more properties
Note 1 to entry: A surfactant or surface-active agent is an additive that has the fundamental property of reducing
the interfacial tension between a solid and liquid or a liquid and air.
3.7
adhesion
phenomenon of attachment at the interface between a solid surface and another material caused by
molecular forces
Note 1 to entry: Adhesion should not be confused with cohesion (3.52).
3.8
adhesive strength
force required to detach a coating (3.46) from a substrate (3.245) or another coating
3.9
aerosol
solid or liquid particles in dispersion (3.83) in a gaseous medium
3.10
ageing
change of one or more initial properties of a coating (3.46) during the passage of time
3.11
alkyd resin
synthetic resin (3.249) resulting from the polycondensation of fatty acids (or oils) and carbonic acids
with polyols
3.12
amino resin
synthetic resin (3.249) resulting from the condensation of urea or melamine or derivatives such as
benzo-guanamine with formaldehyde
Note 1 to entry: These resins (3.211) are often etherified with alcohols.
3.13
anti-blocking agent
additive (3.6) that usually rises to the surface during the drying (3.88) process and thus prevents
blocking (3.27)
3.14
anti-foaming agent
additive (3.6) that prevents foaming or reduces the foaming tendency of a coating material (3.48)
Note 1 to entry: See also defoaming agent (3.74).
3.15
anti-fouling paint
coating material (3.48) applied on a structure to prevent the accumulation of fouling or biological
growth
3.16
anti-settling agent
additive (3.6) that prevents or retards the settling (3.229) of pigments (3.193) and/or extenders (3.104)
during storage of a coating material (3.48)
ISO 4618:2023(E)
3.17
anti-skinning agent
additive (3.6) that prevents or retards skinning (3.236) caused by oxidation during storage
3.18
apparent density
ratio between the mass and the volume of a non-tamped powder
Note 1 to entry: See also bulk density (3.35) and tamped density (3.251).
3.19
appearance
visual characteristics of a surface
Note 1 to entry: Appearance is n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.