iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1263-2:1998

(Main)

Safety nets - Part 2: Safety requirements for the erection of safety nets

Safety nets - Part 2: Safety requirements for the erection of safety nets

This European Standard specifies safety requirements for the erection of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of type S, type T, type U and type V safety nets in accordance with EN 1263-1. Small safety nets of type S according to EN 1263-1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.

Schutznetze - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen

Diese Europäische Norm enthält sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen in Übereinstimmung mit der Gebrauchsanleitung des Herstellers und mit den Produktfestlegungen und Prüfverfahren der Schutznetztypen S, T, U und V nach EN 1263-1. Kleine Schutznetze Typ S nach EN 1263-1 (kleiner als 35 m2 und 5,0 m auf der kürzesten Seite) sind nicht Gegenstand dieser Europäischen Norm.

Filets de sécurité - Partie 2: Exigences de sécurité pour le montage de filets de sécurité

La présente norme européenne spécifie les exigences de sécurité pour le montage des filets de sécurité conformément au manuel d'instruction du constructeur et aux spécifications du produit, ainsi que pour la réalisation des essais sur les filets de sécurité de type S, T, U et V conformément à l'EN 1263-1. Les petits filets de sécurité type S selon EN 1263-1 (plus petit que 35 m2 et 5,0 m dans la plus petite dimension) ne sont pas traités dans cette norme européenne.

Varovalne mreže - 2. del: Varnostne zahteve za nameščanje varovalnih mrež

General Information

Status
Withdrawn
Publication Date
19-May-1998
Withdrawal Date
20-Aug-2002
ICS
13.340.20 - Head protective equipment
Technical Committee
CEN/TC 53 - Temporary works equipment
Drafting Committee
CEN/TC 53/WG 7 - Specification for safety nets
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Aug-2002
Completion Date
21-Aug-2002
Ref Project
SIST EN 1263-2:2000 - Safety nets - Part 2: Safety requirements for the erection of safety nets

Relations

Replaced By
EN 1263-2:2002 - Safety nets - Part 2: Safety requirements for the positioning limits
Effective Date
22-Dec-2008

Buy Standard

EN 1263-2:2000EN 1263-2:2000
PreviousNext
Standard
EN 1263-2:2000
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutznetze - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von SchutznetzenFilets de sécurité - Partie 2: Exigences de sécurité pour le montage de filets de sécuritéSafety nets - Part 2: Safety requirements for the erection of safety nets13.340.60Protection against falling and sl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17946:2023(Main)
Helmets for S-EPAC riders
SIST-TS CEN/TS 17946:2023

This document specifies requirements and test methods for helmets worn by users of speed electrically power assisted bicycles (S-EPACs). This document also specifies requirements and test methods for integrated visors in helmets worn by users of S-EPACS.
Requirements and the corresponding methods of test are given for the following:
-   construction, including field of vision;
-   shock absorbing properties;
-   retention system properties, including chin strap and fastening devices;
-   marking and information.

  • Technical specification
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1384:2023(Main)
Helmets for equestrian activities
SIST EN 1384:2023

This document specifies requirements for protective helmets that can have a peak, for people involved in all equestrian activities including but not limited to riding, driving, or handling and caring for horses.
It gives safety requirements that include methods of test and levels. Requirements and the corresponding methods of test are given for the following:
a)   construction, including field of vision;
b)   shock absorbing properties;
c)   resistance to penetration;
d)   mechanical strength in lateral deformation;
e)   retention system properties;
f)   deflection of peak (if fitted);
g)   marking and information;
h)   use of headforms in accordance with EN 960:2006.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17553:2022(Main)
Textiles and textile products - Community face coverings - Minimum requirements, methods of testing and use
SIST-TS CEN/TS 17553:2023

This document specifies the minimum requirements for reusable or single use community face coverings intended for the general public, covering the nose, mouth and chin (for minimum coverage area, see Figure 2) in order to reduce the risk of droplet/aerosol projection towards nearby people. These requirements include:
—   innocuousness,
—   design (including fit),
—   performance,
—   test methods,
—   marking,
—   packaging,
—   information for use.
Figure 2 — Community face coverings minimum coverage area (dark area)
These requirements are applicable to:
—   community face coverings made of one or multiple fabric layers (including woven, knitted, nonwoven), and including community face coverings with a removable filter in between the layers;
—   community face coverings including a transparent window which allows for the wearer's mouth and facial expressions to be seen, in order to facilitate full facial recognition, lip reading and/or sign language alongside other methods of communication (see A.6);
—   structured community face coverings including moulded plastic shells and rigid face coverings' components.
This document is not intended for community face coverings for children up to 4 years of age (it means until 3 years and 11 months) (see A.1).
This document is not intended for medical face masks (medical devices specified in EN 14683), nor for filtering masks to protect against particles (personal protective equipment specified in EN 149).
This document excludes impermeable nose and mouth shields (including visors) and face coverings incorporating inhalation and/or exhalation valve(s) (see A.2).

  • Technical specification
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
SIST EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
SIST EN ISO 18527-1:2022

This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities.
This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses.
It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer.
Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A.
This document does not apply to
a)   eye protectors for protection when operating or travelling on a motorized vehicle,
b)   eye protectors for protection against optical radiation from artificial sources, such as those used in solaria,
c)   eye protectors for direct observation of the sun, and
d)   eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-3:2022(Main)
Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
SIST EN ISO 16321-3:2022

This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321‑1.
This document also applies to mesh protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself".
This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321‑1 will be needed.
This document does not apply to mesh protectors used in sports such as fencing.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-1:2022(Main)
Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)
SIST EN ISO 16321-1:2022

This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.
Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively.
This document applies to:
—     all plano as well as corrective and prescription lensed protectors and components;
—     those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself";
—     those eye and face protectors used in educational establishments.
This document does not apply to:
—     protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies;
—     protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;
—     patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463);
—     protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies;
—     protectors specifically intended for sports for which the ISO 18527 series applies;
—     laser protectors;
—     face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;
—     protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17479:2021(Main)
Hearing protectors - Guidance on selection of individual fit testing methods
SIST EN 17479:2022

This document gives guidelines for the appropriate selection of fit testing methods and measurement, and provides practical guidelines on fit testing methods, their uses and limitations.
This document does not specify the technical requirements for manufacturing fit testing equipment.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-2:2021(Main)
Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
SIST EN ISO 18527-2:2021

This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles.
It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer.
Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A.
This document does not apply to
a)   sports eye protectors designed for use over prescription spectacles,
b)   eye protectors for other occupational applications,
c)   eye protectors without lenses,
d)   eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and
e)   eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-2:2021(Main)
Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
SIST EN ISO 16321-2:2021

This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards, such as optical radiation, impacts from flying particles and fragments, and hot solids during welding and related techniques. The other applicable requirements for welding protectors are given in ISO 16321‑1.
This document also applies to welding protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself".

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day