iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 9806:2017

(Main)

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)

ISO 9806:2017 specifies test methods for assessing the durability, reliability, safety and thermal performance of fluid heating solar collectors. The test methods are applicable for laboratory testing and for in situ testing.
ISO 9806:2017 is applicable to all types of fluid heating solar collectors, air heating solar collectors, hybrid solar collectors co-generating heat and electric power, as well as to solar collectors using external power sources for normal operation and/or safety purposes. It does not cover electrical safety aspects or other specific properties directly related to electric power generation.
ISO 9806:2017 is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.

Solarenergie - Thermische Sonnenkollektoren - Prüfverfahren (ISO 9806:2017)

Énergie solaire - Capteurs thermiques solaires - Méthodes d'essai (ISO 9806:2017)

L'ISO 9806:2017 spécifie les méthodes d'essai permettant d'évaluer la durabilité, la fiabilité, la sécurité et la performance thermique des capteurs solaires à circulation de fluide. Les méthodes d'essai sont applicables pour les essais en laboratoire et les essais in situ.
L'ISO 9806:2017 s'applique à tous les types de capteurs solaires à circulation de liquide, de capteurs solaires à air, de capteurs hybrides solaires produisant de l'énergie thermique et électrique ainsi que des capteurs solaires utilisant des sources d'alimentation externes pour leur fonctionnement normal et/ou à des fins de sécurité. Il ne traite pas des aspects de sécurité électrique ni d'autres propriétés spécifiques directement en rapport avec la production d'énergie électrique.
L'ISO 9806:2017 ne s'applique pas aux appareils dans lesquels un dispositif de stockage thermique fait partie intégrante dans la mesure où les opérations de captage et de stockage de l'énergie ne peuvent pas être séparées en vue d'effectuer des mesures de performance thermique du capteur.

Sončna energija - Sprejemniki sončne energije - Preskusne metode (ISO 9806:2017)

Ta dokument določa preskusne metode za ocenjevanje trajnosti, zanesljivosti, varnosti in toplotne učinkovitosti sprejemnikov sončne energije za ogrevanje tekočine. Preskusne metode se uporabljajo za laboratorijsko preskušanje in preskušanje na mestu uporabe.
Ta dokument se uporablja za vse vrste sprejemnikov sončne energije za ogrevanje tekočine, sprejemnikov sončne energije za ogrevanje zraka, hibridne sprejemnike sončne energije, ki proizvajajo toploto in električno energijo, ter sprejemnikov sončne energije, ki uporabljajo zunanje vire energije za normalno delovanje in/ali varnostne namene. Ne vključuje vidikov električne varnosti
ali drugih določenih lastnosti, ki so neposredno povezane s proizvodnjo električne energije.
Ta dokument se ne uporablja za naprave, pri katerih je enota za shranjevanje toplote sestavni del do te mere, da postopka sprejemanja ni mogoče ločiti od postopka shranjevanja za pripravo meritev toplotne učinkovitosti sprejemnika.

General Information

Status
Published
Publication Date
14-Nov-2017
Withdrawal Date
30-May-2018
ICS
27.160 - Solar energy engineering
Technical Committee
CEN/TC 312 - Thermal solar systems and components
Drafting Committee
CEN/TC 312/WG 1 - Solar collectors
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Nov-2017
Due Date
16-Jun-2018
Completion Date
15-Nov-2017
Ref Project
SIST EN ISO 9806:2018 - Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)

Relations

Replaces
EN ISO 9806:2013 - Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013)
Effective Date
21-Nov-2017

Buy Standard

EN ISO 9806:2018EN ISO 9806:2018
PreviousNext
Standard
EN ISO 9806:2018
English language
102 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9806:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 9806:2014
6RQþQDHQHUJLMD6SUHMHPQLNLVRQþQHHQHUJLMH3UHVNXVQHPHWRGH ,62

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
Solarenergie - Thermische Sonnenkollektoren - Prüfverfahren (ISO 9806:2017)
Énergie solaire - Capteurs thermiques solaires - Méthodes d'essai (ISO 9806:2017)
Ta slovenski standard je istoveten z: EN ISO 9806:2017
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN ISO 9806:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9806:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 9806:2018


EN ISO 9806
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2017
EUROPÄISCHE NORM
ICS 27.160 Supersedes EN ISO 9806:2013
English Version

Solar energy - Solar thermal collectors - Test methods (ISO
9806:2017)
Énergie solaire - Capteurs thermiques solaires - Solarenergie - Thermische Sonnenkollektoren -
Méthodes d'essai (ISO 9806:2017) Prüfverfahren (ISO 9806:2017)
This European Standard was approved by CEN on 29 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9806:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9806:2018
EN ISO 9806:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9806:2018
EN ISO 9806:2017 (E)
European foreword
This document (EN ISO 9806:2017) has been prepared by Technical Committee ISO/TC 180 "Solar
energy" in collaboration with Technical Committee CEN/TC 312 “Thermal solar systems and
components” the secretariat of which is held by ELOT.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9806:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9806:2017 has been approved by CEN as EN ISO 9806:2017 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 9806:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 9806:2018
INTERNATIONAL ISO
STANDARD 9806
Second edition
2017-09
Solar energy — Solar thermal
collectors — Test methods
Énergie solaire — Capteurs thermiques solaires — Méthodes d'essai
Reference number
ISO 9806:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 9806:2018
ISO 9806:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 24194:2022/A1:2024(Amendment)
Solar energy - Collector fields - Check of performance - Amendment 1 (ISO 24194:2022/Amd 1:2024)
SIST EN ISO 24194:2022/kprA1:2024
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24194:2022(Main)
Solar energy - Collector fields - Check of performance (ISO 24194:2022)
SIST EN ISO 24194:2022

This document specifies two procedures to check the performance of solar thermal collector fields. This document is applicable to glazed flat plate collectors, evacuated tube collectors and/or tracking, concentrating collectors used as collectors in fields.
The check can be done on the thermal power output of the collector field and also be on the daily yield of the collector field.
The document specifies for the two procedures how to compare a measured output with a calculated one.
The document applies for all sizes of collector fields.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9488:2022(Main)
Solar energy - Vocabulary (ISO 9488:2022)
SIST EN ISO 9488:2022

This document defines basic terms relating to the work of ISO/TC 180. The committee covers standardization in the field of the measurement of solar radiation and solar energy utilization in space and water heating, cooling, industrial process heating and air conditioning. Consequently, the vocabulary within this document is focussed on definitions relating to those measurement and utilisation technologies.
Since the 1999 version of this document there has been considerable development in solar photovoltaic technologies and high temperature solar thermal technologies that use heat to produce electricity or to provide high temperatures for processes that require elevated temperatures. This standard has some definitions that are useful also for those technologies; however, there are other documents that cover vocabulary for these technologies in more detail.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12975:2022(Main)
Solar collectors - General requirements
SIST EN 12975:2022

This document is applicable to all types of fluid heating solar collectors. This document specifies performance requirements for fluid heating solar collectors with respect to durability, reliability, safety and thermal performance.
This document deals with the solar collector and not with assemblies. This document is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12976-1:2021(Main)
Thermal solar systems and components - Factory made systems - Part 1: General requirements
SIST EN 12976-1:2022

This document specifies requirements on durability, reliability and safety for factory made solar heating systems. The document also includes provisions for evaluation of conformity to these requirements (see Annex A). The concept of system families is included as well, in Annex C.
The requirements in this document apply to factory made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system (see also 4.6).
External auxiliary water heating devices that are placed in series with the factory made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the factory made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option (see Introduction, last paragraph) is not considered to be part of the system.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12976-2:2019(Main)
Thermal solar systems and components - Factory made systems - Part 2: Test methods
SIST EN 12976-2:2019

This document specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The document also includes two test methods for thermal performance characterization by means of whole system testing.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-4:2018(Main)
Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
SIST EN 12977-4:2018

This European Standard specifies test methods for the performance characterization of stores which are intended for use in small custom built systems as specified in EN 12977-1.
Stores tested according to this document are commonly used in solar combisystems. However, the thermal performance of all other thermal stores with water as a storage medium (e.g. for heat pump systems) can be also assessed according to the test methods specified in this document.
This document applies to combistores with a nominal volume up to 3 000 l and without integrated burner.
NOTE   This document is extensively based on references to EN 12977-3:2012.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-2:2018(Main)
Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems
SIST EN 12977-2:2018

This European Standard applies to small and large custom built solar heating systems with liquid heat transfer medium for residential buildings and similar applications, and gives test methods for verification of the requirements specified in EN 12977-1.
This document also includes a method for thermal performance characterization and system performance prediction of small custom built systems by means of component testing and system simulation.
Furthermore, this document contains methods for thermal performance characterization and system performance prediction of large custom built systems.
This document applies to the following types of small custom built solar heating systems:
- systems for domestic hot water preparation only;
- systems for space heating only;
- systems for domestic hot water preparation and space heating;
- others (e.g. including cooling).
This document applies to large custom built solar heating systems, primarily to solar preheat systems, with one or more storage vessels, heat exchangers, piping and automatic controls and with collector array(s) with forced circulation of fluid in the collector loop.
This document does not apply to
- systems with a store medium other than water (e.g. phase- change materials),
- thermosiphon systems,
- integral collector-storage (ICS) systems.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-3:2018(Main)
Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores
SIST EN 12977-3:2018

This European Standard specifies test methods for the performance characterization of stores which are intended for use in small custom built systems as specified in EN 12977-1.
Stores tested according to this document are commonly used in solar hot water systems. However, the thermal performance of all other thermal stores with water as a storage medium can also be assessed according to the test methods specified in this document.
The document applies to stores with a nominal volume between 50 l and 3 000 l.
This document does not apply to combistores. Performance test methods for solar combistores are specified in EN 12977-4.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-5:2018(Main)
Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment
SIST EN 12977-5:2018

This European Standard specifies performance test methods for control equipment. Furthermore, this document contains requirements on accuracy, durability and reliability of control equipment.
The tests described in this document are limited to electrically activated components delivered with or for the system by the final supplier. For the purposes of this document controller and control equipment for solar heating systems and auxiliary heaters, if part of the system, are restricted to the following:
a)   Controllers as:
1)   system clocks, timers and counters;
2)   differential thermostats;
3)   multi-function controllers.
b)   Sensors as:
1)   temperature sensors;
2)   irradiance sensors (for short wave radiation);
3)   pressure sensors;
4)   level sensors;
5)   flow meters;
6)   heat meters.
c)   Actuators as:
1)   pumps;
2)   solenoid and motor valves;
3)   relays.
d)   Combinations of controllers, sensors and actuators listed above.
An additional objective of the procedures described in this document is to verify control algorithms and, together with the accuracy of sensors, to determine control parameters. In addition to verifying the functioning of a controller, its equipment and actuators, the determined parameters may be used for numerical system simulations.
Typically, electrical anodes are not part of the control equipment and are not controlled by the control equipment. However, because they are electrical appliances, electrical anodes are included in this document.
This document is valid for control equipment of solar heating systems for the purpose of hot water preparation and/or space heating. If the solar system is connected to or part of a conventional heating system, the validity is extended to the entire system. In combination with the standards EN 12976-1, EN 12976-2 as well as EN 12977-1, EN 12977-2, EN 12977-3 and EN 12977-4, this document is valid for
e) factory made solar heating systems,
f) small custom built solar heating systems,
g) large custom built solar heating systems,
h)   auxiliary heater equipment used in connection with e), f) and g).

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day