EN 16289:2013
(Main)Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
This European Standard specifies the dimensions of the 28 mm finish for glass containers for pressurised or vacuum liquids designated MCA 7,5 RF.
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - MCA 7,5-RF-Mundstück
Diese Europäische Norm legt die Maße des 28-mm-Schraubmundstückes für Behältnisse aus Glas, bezeichnet mit MCA 7,5-RF, für Flüssigkeiten unter Über- oder Unterdruck fest.
Emballage en verre - Bagues à vis pour capsules pression - Bague MCA 7,5 RF
La présente Norme européenne spécifie les dimensions de la bague de 28 mm de diamètre pour récipients en verre pour liquides sous pression ou sous vide, désignée sous l'appellation bague MCA 7,5 RF.
Steklena embalaža - Grla z navojem za steklenice pod tlakom - Grla MCA 7,5 RF
Ta dokument določa mere 28-mm grla steklenic za tekočine pod tlakom ali vakuumom MCA 7,5 RF.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklena embalaža - Grla z navojem za steklenice pod tlakom - Grla MCA 7,5 RFVerpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - MCA 7,5 RF-MundstückEmballage en verre - Bagues à vis pour capsules à pression - Bague MCA 7,5 RFGlass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16289:2013SIST EN 16289:2013en,fr,de01-maj-2013SIST EN 16289:2013SLOVENSKI
STANDARD
SIST EN 16289:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16289
March 2013 ICS 55.100 English Version
Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
Emballage en verre - Bagues à vis pour capsules pression - Bague MCA 7,5 RF
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - MCA 7,5-RF-Mundstück This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16289:2013: ESIST EN 16289:2013
EN 16289:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Dimensions. 5 Bibliography. 10
SIST EN 16289:2013
EN 16289:2013 (E) 3 Foreword This document (EN 16289:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 16289:2013
EN 16289:2013 (E) 4 Introduction This document is based on CE.T.I.E. (International Technical Centre for Bottling and related Packaging) data sheet GME 32.02 [1]. Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack. .SIST EN 16289:2013
EN 16289:2013 (E) 5 1 Scope This European S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.