EN 1706:2010

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

This European Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
Annex B is included as a guide to the selection of alloys for a specific use or process.
This European Standard is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.

Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung und mechanische Eigenschaften

Diese Europäische Norm legt die Grenzen der chemischen Zusammensetzung von Aluminiumlegierungen für Gussstücke und die mechanischen Eigenschaften von getrennt gegossenen Probestäben für diese Legierungen fest.
Anhang B wurde als Leitfaden zur Auswahl von Legierungen für eine spezifische Anwendung oder einen spezifischen Prozess aufgenommen.
Diese Europäische Norm ist in Verbindung mit EN 576, EN 1559-1, EN 1559-4, EN 1676 und EN ISO 8062-3 anzuwenden.

Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et caractéristiques mécaniques

La présente norme spécifie les teneurs limites de la composition chimique des alliages d'aluminium pour pièces moulées ainsi que les caractéristiques mécaniques des éprouvettes coulées à part pour ces alliages.
L’Annexe B est intégrée à titre de guide pour le choix des alliages pour un usage ou un procédé spécifique.
La présente norme est à utiliser conjointement avec les normes suivantes : EN 576, EN 1559-1, EN 1559-4, EN 1676, EN ISO 8062-3.

Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava in mehanske lastnosti

Ta evropski standard določa omejitve za kemično sestavo aluminijevih zlitin za ulitke in mehanske lastnosti ločeno ulitih preskušancev za te zlitine. Dodatek B je vključen kot vodilo za izbor zlitin za določeno uporabo ali postopek. Ta evropski standard se uporablja v povezavi z EN 576, EN 1559-1, EN 1559-4, EN 1676, EN ISO 8062-3.

General Information

• Status: Withdrawn
• Publication Date: 09-Mar-2010
• Withdrawal Date: 21-Apr-2020
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 10 - Castings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Apr-2020
• Ref Project: SIST EN 1706:2010 - Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

Relations

• Replaces: EN 1706:1998 - Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
• Effective Date: 13-Mar-2010
• Replaced By: EN 1706:2020 - Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
• Effective Date: 12-Aug-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and Aluminiumlegierungen - Gußstücke - Chemische Zusammensetzung und mechanische EigenschaftenAluminium et alliages d'aluminium - Pièces moulées - Composition chimique et caractéristiques mécaniquesAluminium and aluminium alloys - Castings - Chemical composition and mechanical properties77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1706:2010SIST EN 1706:2010en,fr,de01-maj-2010SIST EN 1706:2010SLOVENSKI
STANDARDSIST EN 1706:1999SIST EN 1706:1998/prA1:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1706
March 2010 ICS 77.150.10 Supersedes EN 1706:1998English Version
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et caractéristiques mécaniques
Aluminium und Aluminiumlegierungen - Gußstücke - Chemische Zusammensetzung und mechanische Eigenschaften This European Standard was approved by CEN on 6 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1706:2010: ESIST EN 1706:2010

Mechanical properties of pressure die cast alloys . 19Annex B (informative)
Comparison of casting characteristics, mechanical and other properties . 20Annex C (informative)
Comparison between cast aluminium alloy designations . 24Bibliography . 26 SIST EN 1706:2010
...