Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference liquid, is known.
[1] This term is defined in DIN 1342-1.

Beschichtungsstoffe - Benetzbarkeit - Teil 4: Bestimmung des polaren und dispersen Anteils der Oberflächenspannung von Flüssigkeiten aus einer Grenzflächenspannung (ISO 19403-4:2017)

Peintures et vernis - Mouillabilité - Partie 4: Détermination des fractions polaires et disperses de la tension de surface des liquides à partir de la tension interfaciable (ISO 19403-4:2017)

Le présent document spécifie une méthode d'essai permettant de déterminer les fractions polaire et dispersive de la tension superficielle des liquides à l'aide de méthodes optiques. Cette méthode peut être utilisée pour la caractérisation des produits de peinture liquides, en particulier lorsque des effets de séchage se produisent durant le mesurage. Son applicabilité peut être limitée pour les produits liquides de rhéologie non newtonienne[1].
Le présent document présuppose que les informations relatives à la tension superficielle du liquide à soumettre à essai, ainsi que d'au moins un liquide de référence approprié, sont connues.
[1] Ce terme est défini dans la norme DIN 1342-1.

Barve in laki - Omočljivost - 4. del: Določevanje polarnega in disperznega dela površinske napetosti tekočin prek medfazne napetosti (ISO 19403-4:2017)

General Information

Status
Published
Publication Date
11-Feb-2020
Withdrawal Date
30-Aug-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Feb-2020
Due Date
13-Feb-2021
Completion Date
12-Feb-2020

Relations

Buy Standard

Standard
EN ISO 19403-4:2020
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2020
Barve in laki - Omočljivost - 4. del: Določevanje polarnega in disperznega dela
površinske napetosti tekočin prek medfazne napetosti (ISO 19403-4:2017)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive
fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
Beschichtungsstoffe - Benetzbarkeit - Teil 4: Bestimmung des polaren und dispersen
Anteils der Oberflächenspannung von Flüssigkeiten aus einer Grenzflchenspannung
(ISO 19403-4:2017)
Peintures et vernis - Mouillabilité - Partie 4: Détermination des fractions polaires et
disperses de la tension de surface des liquides à partir de la tension interfaciable (ISO
19403-4:2017)
Ta slovenski standard je istoveten z: EN ISO 19403-4:2020
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19403-4
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 01.040.87
English Version
Paints and varnishes - Wettability - Part 4: Determination
of the polar and dispersive fractions of the surface tension
of liquids from an interfacial tension (ISO 19403-4:2017)
Peintures et vernis - Mouillabilité - Partie 4: Beschichtungsstoffe - Benetzbarkeit - Teil 4:
Détermination des fractions polaires et disperses de la Bestimmung des polaren und dispersen Anteils der
tension de surface des liquides à partir de la tension Oberflächenspannung von Flüssigkeiten aus einer
interfaciable (ISO 19403-4:2017) Grenzflächenspannung (ISO 19403-4:2017)
This European Standard was approved by CEN on 4 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19403-4:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 19403-4:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19403-4:2017 has been approved by CEN as EN ISO 19403-4:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 19403-4
First edition
2017-06
Paints and varnishes — Wettability —
Part 4:
Determination of the polar and
dispersive fractions of the surface
tension of liquids from an interfacial
tension
Peintures et vernis — Mouillabilité —
Partie 4: Détermination des fractions polaires et disperses de la
tension de surface des liquides à partir de la tension interfaciable
Reference number
ISO 19403-4:2017(E)
©
ISO 2017
ISO 19403-4:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 19403-4:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 2
6 Sampling . 4
7 Procedure. 4
7.1 General . 4
7.1.1 Setting up the drop contour analysis device . 4
7.1.2 Test conditions. 4
7.1.3 Cleaning and conditioning of the reference liquid. 4
7.2 Determination of the interfacial tension of the liquid . 5
7.2.1 Preparations . 5
7.2.2 Procedure . 5
7.3 Determination of the surface tension of liquids . 6
8 Evaluation . 6
8.1 General . 6
8.2 Calculation of the dispersive fraction of the surface tension in accordance
with Owens-Wendt-Rabel-Kaelble . 6
8.3 Calculation of the dispersive fraction of the surface tension in accordance with Wu . 6
8.4 Calculation of the polar fraction of the surface tension of the liquid . 7
9 Precision . 7
10 Test report . 7
Bibliography . 8
ISO 19403-4:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
A list of all parts in the ISO 19403 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved

INTERNATIONAL STANDARD ISO 19403-4:2017(E)
Paints and varnishes — Wettability —
Part 4:
Determination of the polar and dispersive fractions of the
surface tension of liquids from an interfacial tension
1 Scope
This document specifies a test method to determine the polar and dispersive fraction of the surface
tension of liquids with optical methods. The method can be applied for the characterization of liquid
coating materials, especially when drying effects occur during measurement. The applicability can be
1)
restricted for liquids with non-Newtonian rheology .
This document assumes that the information of surface tension of the liquid to be tested, as well as at
least one suitable reference liquid, is known.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1409, Plastics/rubber — Polymer dispersions and rubber latices (na
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.