EN 1365-2:2014
(Main)Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
This European Standard specifies a method for determining the fire resistance of:
- floor constructions, without cavities or with unventilated cavities;
- roof constructions, with or without cavities (ventilated or unventilated);
- floor and roof constructions incorporating glazing;
with fire exposure from the underside.
This European Standard is used in conjunction with EN 1363-1.
Feuerwiderstandsprüfungen für tragende Bauteile - Teil 2: Decken und Dächer
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Feuerwiderstandsdauer von
- Deckenkonstruktionen ohne Hohlräume oder mit nicht belüfteten Hohlräumen;
- Dachkonstruktionen mit oder ohne Hohlräume(n) (belüftet oder unbelüftet);
- Decken- und Dachkonstruktionen unter Einbeziehung einer Verglasung;
fest, wobei die Beflammung von der Unterseite aus erfolgt.
Diese Europäische Norm gilt in Verbindung mit EN 1363 1.
Essais de résistance au feu des éléments porteurs - Partie 2: Planchers et toitures
La présente Norme européenne prescrit une méthode pour déterminer la résistance au feu :
- des planchers, sans plenum ou avec plenums non ventilés ;
- des toitures avec ou sans plenums (ventilés ou non) ;
- des planchers et des toitures comportant des vitrages ;
avec une exposition au feu par le dessous.
La présente Norme européenne est utilisée conjointement avec l’EN 1363-1.
Preskusi požarne odpornosti nosilnih elementov - 2. del: Stropi in strehe
Ta evropski standard določa metodo za ugotavljanje požarne odpornosti:
– stropnih konstrukcij, brez lukenj ali z luknjami brez prezračevanja;
– strešnih konstrukcij, z ali brez lukenj (z ali brez prezračevanja);
– stropnih in strešnih konstrukcij z zasteklitvijo;
za izpostavljenostjo požaru z zunanje strani.
Ta standard se uporablja v povezavi s standardom EN 1363-1.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti nosilnih elementov - 2. del: Stropi in streheFeuerwiderstandsprüfungen für tragende Bauteile - Teil 2: Decken und DächerEssais de résistance au feu des éléments porteurs - Partie 2: Planchers et toituresFire resistance tests for loadbearing elements - Part 2: Floors and roofs91.060.30Stropi. Tla. StopniceCeilings. Floors. Stairs91.060.20StreheRoofs13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1365-2:2014SIST EN 1365-2:2014en,fr,de01-december-2014SIST EN 1365-2:2014SLOVENSKI
STANDARDSIST EN 1365-2:20011DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1365-2
November 2014 ICS 13.220.50; 91.060.20; 91.060.30 Supersedes EN 1365-2:1999English Version
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
Essais de résistance au feu des éléments porteurs - Partie 2: Planchers et toitures
Feuerwiderstandsprüfungen für tragende Bauteile - Teil 2: Decken und Dächer This European Standard was approved by CEN on 27 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1365-2:2014 ESIST EN 1365-2:2014
Specific requirements for testing floor and roof constructions incorporating glazing . 20 A.1 General . 20 A.2 Test specimen design . 20 A.3 Test specimen instrumentation . 21 A.3.1 General . 21 A.3.2 Average temperature rise . 21 A.3.2.1 Uniform glazing . 21 A.3.2.2 Non-uniform glazing . 21 A.3.3 Maximum temperature rise . 21 A.3.3.1 General . 21 A.3.3.2 Sloped constructions . 21 A.3.3.3 Horizontal constructions . 22 A.3.4 Deflection . 22 A.3.5 Radiation measurement . 23 A.4 Performance criteria . 23 A.5 Field of direct application of test results . 23 A.5.1 General . 23 A.5.2 Shapes of flat glass panes . 23 A.5.3 Span length . 23 A.5.4 Extension of width in direction perpendicular to the span . 23 A.5.5 Inclination angle . 24 A.5.6 Supporting constructions. 24 A.5.6.1 General . 24 A.5.6.2 Standard supporting constructions . 24 A.5.6.3 Non-standard supporting construction . 24
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.