FprEN ISO 14881

Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO/FDIS 14881:2021)

Integrierte Optik - Schnittstellen - Kopplungsrelevante Parameter (ISO/FDIS 14881:2021)

Dieses Dokument definiert die Eigenschaften, die für die Kopplung von optischen Wellen in und aus integriert-optischen Chips (IOC) und Chips mit optoelektronischen integrierten Schaltkreisen (OEIC) relevant sind. Dieses Dokument ist auf Stoßkopplung über die Wellenleiter-Endflächen beschränkt. Die Definitionen ermöglichen eine Spezifizierung der zu koppelnden Elemente (z. B. Fasern, integriert-optische Chips) in Bezug auf die Koppeleigenschaften.

Optique intégrée - Interfaces - Paramètres caractérisant les propriétés de couplage (ISO/FDIS 14881:2021)

Integrirana optika - Vmesniki - Parametri, ustrezni za sklope lastnosti (ISO/FDIS 14881:2021)

General Information

• Status: Not Published
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Due Date: 08-Sep-2021
• Completion Date: 08-Sep-2021
• Ref Project: kSIST FprEN ISO 14881:2021 - Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO/FDIS 14881:2021)

RELATIONS

• Revised: EN ISO 14881:2005 - Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2001)
• Effective Date: 28-Dec-2016

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 14881:2020
01-maj-2020
Integrirana optika - Vmesniki - Parametri, ustrezni za sklope lastnosti (ISO/DIS
14881:2020)

Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO/DIS

14881:2020)

Integrierte Optik - Schnittstellen - Kopplungsrelevante Parameter (ISO/DIS 14881:2020)

Optique intégrée - Interfaces - Paramètres caractérisant les propriétés de couplage

(ISO/DIS 14881:2020)
Ta slovenski standard je istoveten z: prEN ISO 14881
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
oSIST prEN ISO 14881:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14881:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14881:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14881
ISO/TC 172/SC 9 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-03-30 2020-06-22
Integrated optics — Interfaces — Parameters relevant to
coupling properties

Optique intégrée — Interfaces — Paramètres caractérisant les propriétés de couplage

ICS: 31.260
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14881:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14881:2020
ISO/DIS 14881:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14881:2020
ISO/DIS 14881:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Properties relevant to coupling ............................................................................................................................................................ 5

4.1 General ........................................................................................................................................................................................................... 5

4.2 Chip geometry (see Figure 3) ..................................................................................................................................................... 5

4.3 Waveguide geometry (see Figure 4) ......... ............................................................................................................................ 5

4.4 Fibre tolerances ...................................................................................................................................................................................... 6

4.5 Endface properties (see Figure 5) .......................................................................................................................................... 6

4.6 Spot size ........................................................................................................................................................................................................ 7

4.7 Polarization of waveguide mode ............................................................................................................................................. 7

Annex A (informative) ........................................................................................................................................................................................................ 8

Bibliography ................................................................................................................................................................................................................................ 9

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 14881:2020
ISO/DIS 14881:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/ iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 172 Optics and photonics, Subcommittee

SC 9, Laser and electro optical systems.

This second edition cancels and replaces the first edition (ISO 14881:2001), which has been technically

revised.
The main changes compared to the previous edition are as follows:

— Terminologies that have not been frequently used over the last 5 to 10 years are revised to those

matching to current trends.

— In the revision process, terminologies and definitions are compared to similar terminology

definitions in IEC and harmonized.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 14881:2020
ISO/DIS 14881:2020(E)
Introduction

The aim of this document is to clarify the terms of the relatively new field of “integrated optics” and to

define a unified vocabulary at a time when the first products are coming onto the market. It is expected

that this document will be revised periodically to adopt the requirements of customers and suppliers

of integrated optical products. At a later stage, it is planned to add definitions from other International

Standards which deal with integrated optics.

Some of the definitions are closely related to definitions given in IEC 60050, International electrotechnical

vocabulary. Wherever this can lead to misunderstanding, integrated optics or integrated optical

waveguide should be used together with the defined term.
© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 14881:2020
---------------------- Page: 8 ----------------------
oSIST prEN ISO 14881:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 14881:2020(E)
Integrated optics — Interfaces — Parameters relevant to
coupling properties
1 Scope

This document defines the relevant properties for coupling light into and out of integrated optical chips

(IOC) and chips with photonic integrated circuits (PIC). This document mainly focuses on butt coupling

via the waveguide endfaces. The definitions provide the basis for specifying the elements to be coupled

(e. g. fibres, integrated optical chips) related to coupling properties.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 4288:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and

procedures for the assessment of surface texture
ISO 11807-1, Integrated optics — Vocabulary — Part 1: Basic terms and symbols

ISO 11807-2, Integrated optics — Vocabulary — Part 2: Terms used in classification

IEC 60793-1-20:2014, Optical fibres — Part 1-20: Measurement methods and test procedures — Fibre

geometry
3 Terms and definitions

For the purposes of this International Standard, the terms and definitions given in ISO 11807-1 and

ISO 11807-2 and the following apply .

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1
adiabatic coupling

coupling of fibre and tapered waveguide or two waveguides one of which, at least is tapered to utilize

mode coupling without optical power loss for maximum coupling efficiency
3.2
anti-reflection coating of endfaces
thin film coating on the endfa
...