EN 14358:2006

Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample

This document specifies a method for the determination of characteristic 5-percentile values from test results for fasteners and wood-based products.
This document also gives corresponding acceptance criteria for a sample.
Structural timber is not covered by this document but by EN 384.
Sampling is not covered by this document, but reference is made to the relevant product standards.

Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für Proben

Diese Europäische Norm gilt für Kohlenstoffdioxid zur Aufbereitung von Wasser für den menschlichen
Gebrauch. Sie beschreibt die Eigenschaften von Kohlenstoffdioxid und legt die Anforderungen sowie die
entsprechenden Analysenverfahren für Kohlenstoffdioxid fest. Des Weiteren gibt sie Informationen für die
Anwendung von Kohlenstoffdioxid in der Wasseraufbereitung.

Structures en bois - Détermination des valeurs correspondant au fractile à 5 % d'exclusion inférieure et critères d'acceptation pour un échantillon

Le présent document indique une méthode de détermination des valeurs caractéristiques correspondant au
fractile à 5 % d’exclusion inférieure à partir de résultats d’essai, pour les assembleurs et les produits à base
de bois.
Le présent document donne également les critères d’acceptation correspondant pour un échantillon.
Le bois de structure n’est pas couvert par le présent document mais par l’EN 384.
L’échantillonnage n’est pas couvert par le présent document, mais il est fait référence aux normes de produits
utiles.

Lesene konstrukcije - Računske lastnosti 5-percentilne vrednosti in privzemni kriteriji za vzorce

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2006
• Withdrawal Date: 21-Jun-2016
• ICS: 79.040 - Wood, sawlogs and sawn timber
• ICS: 91.080.20 - Timber structures
• Technical Committee: CEN/TC 124 - Timber structures
• Drafting Committee: CEN/TC 124/WG 2 - Solid timber
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Jun-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
• Ref Project: SIST EN 14358:2007 - Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample

Relations

• Replaced By: EN 14358:2016 - Timber structures - Calculation and verification of characteristic values
• Effective Date: 29-Jun-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für ProbenStructures en bois - Détermination des valeurs correspondant au fractile a 5 % d'exclusion inférieure et criteres d'acceptation pour un échantillonTimber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample91.080.20Lesene konstrukcijeTimber structuresICS:Ta slovenski standard je istoveten z:EN 14358:2006SIST EN 14358:2007en,fr,de01-julij-2007SIST EN 14358:2007SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14358
December 2006 ICS 79.040; 91.080.20 English Version
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
Structures en bois - Détermination des valeurs correspondant au fractile à 5 % d'exclusion inférieure et critères d'acceptation pour un échantillon
Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für ProbenThis European Standard was approved by CEN on 25 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14358:2006: ESIST EN 14358:2007
...