iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14919:2023

(Main)

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)

This document specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.

Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und Lichtbogenspritzen - Einteilung und technische Lieferbedingungen (ISO 14919:2023)

Dieses Dokument legt die Anforderungen an die Einteilung von metallischen und nichtmetallischen Drähten (Massivdraht und Fülldraht), Stäben und Schnüren, die durch die Verfahren des thermischen Spritzens, insbesondere durch Flamm- und Lichtbogenspritzen, verarbeitet werden, fest.

Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification et conditions techniques d'approvisionnement (ISO 14919:2023)

Le présent document spécifie les exigences en matière de classification des fils métalliques et non métalliques (pleins et fourrés), des baguettes, des cordons traités par projection thermique, notamment les procédés à l’arc et dans la flamme.

Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje - Klasifikacija in tehnični dobavni pogoji (ISO 14919:2023)

Standard ISO 14919:2015 določa zahteve za klasifikacijo kovinskih in nekovinskih žic (masivnih in strženskih žic), palic in vrvi, obdelanih z vročim brizganjem, zlasti z obločnim in plamenskim brizganjem.

General Information

Status
Published
Publication Date
07-Nov-2023
ICS
25.220.20 - Surface treatment
Technical Committee
CEN/TC 240 - Thermal spraying and thermally spraying coatings
Drafting Committee
CEN/TC 240 - Thermal spraying and thermally spraying coatings
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Nov-2023
Completion Date
08-Nov-2023
Ref Project
SIST EN ISO 14919:2024 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)

Relations

Replaces
EN ISO 14919:2015 - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
Effective Date
19-Jan-2023

Buy Standard

EN ISO 14919:2024EN ISO 14919:2024
PreviousNext
Standard
EN ISO 14919:2024
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14919:2024
01-januar-2024
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje -
Klasifikacija in tehnični dobavni pogoji (ISO 14919:2023)
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and
technical supply conditions (ISO 14919:2023)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und
Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2023)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au
pistolet dans une flamme - Classification et conditions techniques d'approvisionnement
(ISO 14919:2023)
Ta slovenski standard je istoveten z: EN ISO 14919:2023
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14919:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 14919:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 14919:2024


EN ISO 14919
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN ISO 14919:2015
English Version

Thermal spraying - Wires, rods and cords for flame and arc
spraying - Classification and technical supply conditions
(ISO 14919:2023)
Projection thermique - Fils, baguettes et cordons pour Thermisches Spritzen - Drähte, Stäbe und Schnüre zum
projection thermique à l'arc et au pistolet dans une Flammspritzen und Lichtbogenspritzen - Einteilung -
flamme - Classification et conditions techniques Technische Lieferbedingungen (ISO 14919:2023)
d'approvisionnement (ISO 14919:2023)
This European Standard was approved by CEN on 5 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14919:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 14919:2024
EN ISO 14919:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 14919:2024
EN ISO 14919:2023 (E)
European foreword
This document (EN ISO 14919:2023) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14919:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Mac
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14920:2023(Main)
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
SIST EN ISO 14920:2023

This document specifies the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion-bonded coating.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17832:2023(Main)
Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
SIST EN 17832:2023

This document describes the procedure for the measurement of the feed rate for thermal spraying with spray materials in powder form in a production environment.
The application of this document is essential if information on the feed rate of a spray material in powder form is required when using a thermal spraying method.
It is applicable to any thermal spraying method using spray materials in powder form (see EN ISO 14917) where the technical installation used allows the spray powder to be fed through without an activated spray gun.
The determination of the feed rate is mandatory for the preparation of thermal spray procedure specifications in accordance with EN 17002 and the determination of the deposition efficiency in accordance with EN ISO 17836.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14922:2021(Main)
Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
SIST EN ISO 14922:2021

This document specifies quality requirements for manufacturers of thermal sprayed coatings to ensure quality assurance for activities in the field of production.
NOTE      It is independent of the availability of a quality management system, e.g. ISO 9001, ISO 14001 and ISO 45001, which concern the concept and organization of the quality management.
This document defines the quality requirements that are of importance for the manufacturing route.
This document is applicable to thermal spraying including all the pre- and post-treatments of the whole coating process for new parts, for repairs and maintenance (e.g. after service) at the workshop or on site.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15339-2:2021(Main)
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
SIST EN 15339-2:2021

This document specifies safety requirements of machines and equipment for thermal spraying, in this case of gas control units. This document is intended to be used in conjunction with Part 1, which deals with general aspects when designing, manufacturing, and/or putting in service of machines or equipment.
Generally the requirements of EU Directive 2014/34/EU are valid for the use of this document.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12671:2021(Main)
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2021)
SIST EN ISO 12671:2021

This document specifies how the symbolic representation of thermally sprayed coatings is indicated on drawings.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17393:2020(Main)
Thermal spraying - Tubular coating tensile test
SIST EN 17393:2020

This document specifies the procedure for the determination of coating strength, and hence of cohesive strength in a tubular coating tensile test.
The test is intended to determine the tensile coating strength parallel to the spray layers (normal to the spray direction) and to identify differences in particle cohesion quality, as caused by defects as internal delamination at cracks or oxides between the spray particles or splats.
The tubular coating tensile test is suitable for sprayed coatings deposited using metallic materials (not carbides and ceramics).
The tubular coating tensile test is not suitable for fused sprayed coatings deposited using self-fluxing alloys.
The test supports quality assurance and is intended to be applied for the purpose of coating optimization by identifying the influences of coating parameters and spray materials on the coatings's quality. Furthermore, the coating in particular for cold sprayed coatings can be compared with the characteristics of similar solid materials and the coating's quality can be assessed.
This test is not recommended for thin coatings (coating thickness < 500 µm), since massive scattering of results is to be expected here. Due to the size of the specimen, it is particularly suitable to apply the tubular coating tensile test for coating processes that use a concentrated spray jet and a highly focused spray spot, as in the case of cold spraying, high velocity flame spraying (HVOF) or plasma spraying. Applying the tubular coating tensile test for coating processes that use a broad spray jet, such as flame spraying and arc spraying, may require special spraying measures, e.g. the use of a template to ensure a nearly vertical impingement angle.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2063-1:2019(Main)
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
SIST EN ISO 2063-1:2019

This document specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.
In this document, requirements for the planning of the corrosion protection system and for the constructive design of the component to be protected are specified, where thermal spraying is intended to be the process for the deposition of the metallic corrosion protection.
Some field-related basic terms are defined and instructions for corrosion behaviour of the zinc and aluminium materials under different environment conditions are provided.
Characteristic properties of the coating, e.g. coating thickness, minimum adhesive strength and surface appearance, are specified and test procedures for thermal-sprayed corrosion protection coatings of zinc, aluminium or their alloys are determined.
This document is valid for applying thermal-sprayed zinc and aluminium protection coatings against corrosion in the temperature range between −50 °C to +200 °C, taking into consideration the service conditions of any sealants used. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of this document.
Other corrosion protection processes, e.g. hot-dip galvanizing (galvanic coating), sherardizing, electroplating or selection and deposition of organic coatings/paints are not in the scope of this document.
Requirements for the manufacturing of thermal-sprayed coatings are specified in ISO 2063-2.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13507:2018(Main)
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
SIST EN 13507:2018

This document specifies the processing of surface preparation for thermal spraying. Important principles indicated in this European Standard are intended to be taken into consideration when surfaces of metallic parts are to be prepared for thermal spraying. This document applies for production of new parts as well as for the repair of worn parts.
This document does not apply for thermal spraying in the case of protection against atmospheric corrosion by coatings of zinc and/or aluminium and their alloys, for which EN ISO 2063-1:2017 and EN ISO 2063-2:2017 apply.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17001:2018(Main)
Thermal spraying - Components with thermally sprayed coatings - Coating specification
SIST EN 17001:2018

This European standard defines the requirements to be specified in the coating specification for a thermally sprayed coating. It applies to components and workpieces made of metallic or non-metallic materials that are to be partially or completely coated with thermally sprayed coatings. The coating can be made of metals, metal ceramics, oxide ceramics or plastics. Additional requirements for the coating manufacturer that are not coating-specific are intended to be included by defining the technical supply conditions according to EN ISO 12670.
The requirements defined in this standard are intended to be met by a component-related thermal spray procedure specification (TSPS) prepared by the coating manufacturer. The thermal spray procedure specification is intended to be documented and component-related to ensure traceability. For details, see FprEN 17002.
Proof that the requirements of the coating specification are met by the application of the thermal spray procedure specification can be provided by performing a component-related procedure qualification according to EN 15648.
If specific coating requirements cannot be specified by the customer, they are intended to be agreed with the contractor on the basis of the requirements for the sprayed coating - e.g. against fretting wear at high temperatures - and on the basis of the contractor's past experience.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1395-5:2018(Main)
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
SIST EN 1395-5:2018

This European Standard specifies requirements for the acceptance inspection of thermal spraying equipment, in this case the pressurized part only for low pressure and controlled atmosphere plasma spraying, used in spray jobs to produce thermally sprayed coatings of reproducible quality.
This part is intended to be used in conjunction with EN 1395-1, which includes general requirements and explanations of procedures.
The plasma spraying system itself is intended to be acceptance inspected according to EN 1395-4.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day