CEN/TR 13480-7:2017
(Main)Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
This Technical Report gives guidance on the use of conformity assessment procedures for industrial piping in relation to EN 13480.
Metallische industrielle Rohrleitungen - Teil 7: Anleitung für den Gebrauch des Konformitätsbewertungsverfahrens
Dieser Technische Report enthält eine Anleitung für den Gebrauch von Konformitätsbewertungsverfahren für industrielle Rohrleitungen nach EN 13480.
Tuyauteries industrielles métalliques - Partie 7 : Guide pour l'utilisation des procédures d'évaluation de la conformité
Kovinski industrijski cevovodi - 7. del: Navodila za ugotavljanje skladnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 13480-7:2018
01-januar-2018
1DGRPHãþD
SIST CEN/TR 13480-7:2002
Kovinski industrijski cevovodi - 7. del: Navodila za ugotavljanje skladnosti
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment
procedures
Metallische industrielle Rohrleitungen - Teil 7: Anleitung für den Gebrauch des
Konformitätsbewertungsverfahrens
Tuyauteries industrielles métalliques - Partie 7 : Guide pour l'utilisation des procédures
d'évaluation de la conformité
Ta slovenski standard je istoveten z: CEN/TR 13480-7:2017
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST-TP CEN/TR 13480-7:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 13480-7:2018
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7
TECHNICAL REPORT
RAPPORT TECHNIQUE
July 2017
TECHNISCHER BERICHT
ICS 23.040.01 Supersedes CEN/TR 13480-7:2002
English Version
Metallic industrial piping - Part 7: Guidance on the use of
conformity assessment procedures
Tuyauteries industrielles métalliques - Partie 7 : Guide Metallische industrielle Rohrleitungen - Teil 7:
pour l'utilisation des procédures d'évaluation de la Anleitung für den Gebrauch des
conformité Konformitätsbewertungsverfahrens
This Technical Report was approved by CEN on 19 June 2017. It has been drawn up by the Technical Committee CEN/TC 267.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 13480-7:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Application of the PED . 4
4.1 General . 4
4.2 Conformity assessment procedures . 4
4.2.1 General . 4
4.2.2 Choice of conformity assessment procedures . 4
4.2.3 Conformity assessment procedures and the involvement of Responsible Authorities . 5
5 Subcontracting . 5
Annex A (informative) Conformity of industrial piping to the essential safety requirements
of Directive 2014/68/EU (Pressure equipment directive) . 6
A.1 Introduction . 6
A.2 Conformity assessment procedure . 6
A.3 Certification and CE marking . 7
A.3.1 Declaration of conformity, CE marking .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.