iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 438-1:1991

(Main)

Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987, modified)

Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987, modified)

This standard classifies decorative laminated sheets according to their performance and main recommended fields of application, and provides also for materials of special characteristics, for example postformability or defined reaction to fire

Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 1: Spezifikation (ISO 4586-1:1987, modifiziert)

Diese Norm klassifiziert dekorative Schichtstoffplatten nach ihrer Beanspruchbarkeit und den hauptsächlich empfohlenen Anwendungsgebieten. Materialien mit speziellen Eigenschaften wie z.B. Nachformbarkeit oder vorgegebenem Brandverhalten sind darin auch enthalten.

Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables - Partie 1: Spécifications (ISO 4586-1:1987, modifiée)

Cette Norme établit une classification pour les plaques de stratifié décoratif haute pression en fonction de leurs performances et de leur principiaux domaines d'application préconisés, et donne également des spécifications pour des matériaux ayant des caractéristiques particulières, par example aptitude au postformage ou réaction au feu définie.

Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 1. del: Specifikacije (ISO 4586-1:1987, spremenjen)

General Information

Status
Withdrawn
Publication Date
07-May-1991
Withdrawal Date
25-Jan-2005
ICS
83.140.20 - Laminated sheets
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249 - Plastics
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Jan-2005
Completion Date
26-Jan-2005
Ref Project
SIST EN 438-1:2000 - Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specifications (ISO 4586-1:1987, modified)

Relations

Replaced By
EN 438-1:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
Effective Date
22-Dec-2008
Replaced By
EN 438-3:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
EN 438-4:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater.
Effective Date
22-Dec-2008
Replaced By
EN 438-5:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
EN 438-7:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Effective Date
22-Dec-2008
Replaced By
EN 438-6:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater
Effective Date
22-Dec-2008

Buy Standard

EN 438-1:2000EN 438-1:2000
PreviousNext
Standard
EN 438-1:2000
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 1: Spezifikation (ISO 4586-1:1987, modifiziert)Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables - Partie 1: Spécifications (ISO 4586-1:1987, modifiée)Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 1: Specif
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19712-3:2022(Main)
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
SIST EN ISO 19712-3:2022

This document specifies the methods of test for determination of the properties of solid surfacing materials, as defined in Clause 3, in the form of shaped products. These methods are primarily intended for testing the materials specified in ISO 19712-1.
The tests can be carried out on finished products, but are generally carried out on test panels of a size sufficient to meet the requirements of the test, and of the same material and finish as the finished product.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-2:2016+A1:2018(Main + Amendment)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
SIST EN 438-2:2016+A1:2019

This European Standard specifies the methods of test for determination of the properties of high-pressure decorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheets specified in EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-8, and EN 438-9.
The precision of the test methods, specified in this European Standard, is not known because inter-laboratory data are not yet available. When inter-laboratory data will be obtained, precision statements will be added to the test method at the following revision. For those test methods having an end point determination based on subjective judgement, it is not meaningful to make a statement of precision.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-8:2018(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates
SIST EN 438-8:2019

This document specifies performance requirements for design laminates intended for interior use with a design effect surface having a phenolic based core and a decorative surface, not covered by EN 438-3 [1], EN 438-4 [2], EN 438-5 [3] and EN 438-6 [4]. Three surface layer types (metal, wood veneer and pearlescent decor) are defined in this part of EN 438.
EN 438-2 specifies the test methods relevant to this part of EN 438.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13655:2018(Main)
Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
SIST EN 13655:2018

This document specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films for mulching applications in agriculture and horticulture.
These mulch films are intended to be removed after use and not incorporated in the soil.
These mulch films are not intended to be used for soil disinfection by fumigation. Films for this application are in the scope of prEN 17098-1[1].
It specifies a classification for durability of mulching films and the test methods referred to in this document.
This document is applicable to thermoplastic mulch films, used for agriculture and horticulture in Europe, based on polyethylene and/or ethylene copolymers, of the following types:
-   transparent films;
-   black films;
-   reflective films (e.g. white films, black/white films and black/silver films);
-   films of other colour(s) for weed control (e.g. green, brown).
This document also defines installation, use and removal conditions of mulch films.
NOTE   Mulch films are considered as highly contaminated by soil and vegetal residues: the observed rates (or levels) of contamination of mulch films can vary from 70 % to 90 %. Therefore the film thickness is a key factor on the rate of contamination, the thinnest films (e.g. less than 25 µm) will be the mostly contaminated, difficult, expensive to remove, recover and recycle.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-9:2017(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
SIST EN 438-9:2018

This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438.
EN 438-2 specifies the test methods relevant to this part of EN 438.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-3:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
SIST EN 438-3:2016

This European Standard applies to laminates less than 2 mm thick produced by using an high pressure process, normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This European Standard also specifies requirements for the properties of the various types of laminates covered by this classification system.
High-pressure decorative laminates are characterised by their qualities, durability and functional performance. HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are resistant to wear, scratching, impact, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain.
EN 438-2 specifies the methods of test relevant to this European Standard. EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9 are reserved for special types of HPL materials.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-5:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
SIST EN 438-5:2016

This European Standard applies to six classes of flooring grade laminates less than 2 mm thick produced by using a high pressure process, intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329.
High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain.
The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product.
This European Standard applies only to decorative laminates as defined in Clause 3.
EN 438-2 specifies the methods of test relevant to this European Standard.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-1:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
SIST EN 438-1:2016

This part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9.
This European Standard is applicable to high-pressure decorative laminate(s) (HPL) produced by using a high pressure process.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-6:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
SIST EN 438-6:2016

This European Standard applies to Exterior-grade Compact laminates of thickness 2 mm and greater produced by using a high pressure process. It specifies requirements for standard and flame-retardant laminates intended for use under outdoor weather conditions such as direct sunlight rain and frost. Two levels of performance are specified; one for moderate exterior conditions, and the other for severe exterior conditions.
Laminates complying with this European Standard are referred to as Exterior-grade Compact laminates, and are characterized by their high tensile strength, high impact resistance, thermal shock resistance, and resistance to weather and corrosion. They are available in a variety of decorative colours, with high resistance to colour change and aging in outdoor applications. When they are self-supporting Exterior-grade Compact laminates are ready for installation, and only require cutting to size, drilling, etc. to suit the application. EN 438-2 specifies the methods of test relevant to this part of EN 438.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 438-4:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
SIST EN 438-4:2016

This European Standard specifies performance requirements for two types of compact laminate of thickness 2 mm or greater produced by using a high pressure process intended for interior use .
High-pressure decorative Compact laminates are characterised by their aesthetic qualities, strength, durability and functional performance. Compact HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are extremely strong, and resistant to wear, impact, scratching, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain.
EN 438-2 specifies the methods of test relevant to this European Standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day