EN ISO/IEC 15416:2001

Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000)

Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung - Testspezifikationen für Strichcodedruckqualität, Lineare Symbole (ISO/IEC 15416:2000)

Diese Norm
¾ legt die Methode zur Messung spezifischer Attribute von Strichcodesymbolen fest;
¾ definiert ein Verfahren zur Bewertung dieser Messergebnisse und ermöglicht eine Gesamtbewertung der Symbolqualität;
¾ informiert über mögliche Ursachen für Abweichungen von der optimalen Klasse, um Anwendern die Möglichkeit zu entsprechenden Korrekturen zu geben.
Diese  Norm wird auf Symbologien angewendet, für die ein Referenzdecodieralgorithmus definiert ist und die unter Verwendung einer linearen Scanningmethode gelesen werden. Diese Methode kann aber ganz oder teilweise auch auf andere Symbologien übertragen werden.

Technologies de l'information - Techniques d'identification automatique et de capture des données - Spécifications pour essai de qualité d'impression des codes à barres - Symboles linéaires (ISO/IEC 15416:2000)

Informacijska tehnologija - Tehnike za samodejno identificiranje (razpoznavanje) in zajem podatkov - Specifikacija za preskušanje kakovosti tiska črtnih kod - Linearni simboli (ISO/IEC 15416:2000)

General Information

• Status: Published
• Publication Date: 11-Dec-2001
• ICS: 01.080.50 - Graphical symbols for use on information technology and telecommunications technical drawings and in relevant technical product documentation
• ICS: 35.040 - Information coding
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: CEN/TC 225 - AIDC technologies
• Drafting Committee: CEN/TC 225 - AIDC technologies
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 07-Sep-2009
• Completion Date: 07-Sep-2009
• Ref Project: SIST EN ISO/IEC 15416:2003 - Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000)

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2003
,QIRUPDFLMVNDWHKQRORJLMD7HKQLNH]DVDPRGHMQRLGHQWLILFLUDQMHUD]SR]QDYDQMHLQ
]DMHPSRGDWNRY6SHFLILNDFLMD]DSUHVNXãDQMHNDNRYRVWLWLVNDþUWQLKNRG/LQHDUQL
VLPEROL,62,(&
Information technology - Automatic identification and data capture techniques - Bar code
print quality test specification - Linear symbols (ISO/IEC 15416:2000)
Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung -
Testspezifikationen für Strichcodedruckqualität, Lineare Symbole (ISO/IEC 15416:2000)
Technologies de l'information - Techniques d'identification automatique et de capture des
données - Spécifications pour essai de qualité d'impression des codes a barres -
Symboles linéaires (ISO/IEC 15416:2000)
Ta slovenski standard je istoveten z: EN ISO/IEC 15416:2001
ICS:
01.080.50 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
WHKQLþQLKULVEDKY information technology and
LQIRUPDFLMVNLWHKQRORJLMLLQ telecommunications technical
WHOHNRPXQLNDFLMDKWHUY drawings and in relevant
XVWUH]QLWHKQLþQLSURL]YRGQL technical product
GRNXPHQWDFLML documentation
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO/IEC 15416
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 01.080.50; 35.040 Supersedes EN 1635:1997
English version
Information technology - Automatic identification and data
capture techniques - Bar code print quality test specification -
Linear symbols (ISO/IEC 15416:2000)
Technologies de l'information - Techniques d'identification Informationstechnik - Verfahren der automatischen
automatique et de capture des données - Spécifications Identifikation und Datenerfassung - Testspezifikationen für
pour essai de qualité d'impression des codes à barres - Strichcodedruckqualität, Lineare Symbole (ISO/IEC
Symboles linéaires (ISO/IEC 15416:2000) 15416:2000)
This European Standard was approved by CEN on 20 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 15416:2001 E
worldwide for CEN national Members.

CORRECTED  2002-03-27
Foreword
The text of the International Standard from Technical Committee ISO/IEC/JTC 1 "Information
technology" of the International Organization for Standardization (ISO) has been taken over as a
European Standard by Technical Committee CEN/TC 225 "Bar coding", the secretariat of which
is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2002, and conflicting national
standards shall be withdrawn at the latest by June 2002.
This document supersedes EN 1635:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO/IEC 15416:2000 has been approved by CEN as a
European Standard without any modifications.
INTERNATIONAL ISO/IEC
STANDARD 15416
First edition
2000-08-15
Information technology — Automatic
identification and data capture
techniques — Bar code print quality test
specification — Linear symbols
Technologies de l'information — Techniques d'identification automatique et
de capture des données — Spécifications pour essai de qualité
d'impression des codes à barres — Symboles linéaires
Reference number
ISO/IEC 15416:2000(E)
©
ISO/IEC 2000
ISO/IEC 15416:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO/IEC 2000 – All rights reserved

ISO/IEC 15416:2000(E)
Contents Page
Foreword.vi
Introduction.vii
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Symbols and abbreviated terms .3
4.1 Abbreviations.3
4.2 Symbols .3
5 Measurement methodology.4
5.1 General requirements.4
5.2 Reference reflectivity measurements.5
5.2.1 Measurement wavelength(s).5
5.2.2 Measuring aperture.5
5.2.3 Optical geometry.6
5.2.4 Inspection band .7
5.2.5 Number of scans.7
5.3 Scan reflectance profile .7
5.4 Scan reflectance profile assessment parameters.8
5.4.1 Element determination .9
5.4.2 Edge determination .9
5.4.3 Decode .10
5.4.4 Symbol contrast (SC) .10
5.4.5 Minimum reflectance (R ).10
min
5.4.6 Edge contrast (EC).10
5.4.7 Modulation (MOD).10
5.4.8 Defects .10
5.4.9 Decodability.10
5.4.10 Quiet zone check .11
6 Symbol grading.12
6.1 Scan reflectance profile grading.12
6.1.1 Decode .12
6.1.2 Reflectance parameter grading.12
6.1.3 Decodability.13
6.2 Expression of symbol grade.13
7 Substrate characteristics.13
Annex A (normative) Decodability.14
A.1 Two-width symbologies .14
A.2 Edge to similar edge decodable symbologies ((n, k) symbologies) .14
Annex B (normative) Example of symbol quality grading .16
B.1 Individual scan reflectance profile grading .16
B.2 Overall symbol grade .17
Annex C (informative) Symbol grading flowchart.18
Annex D (informative) Substrate characteristics.19
D.1 Substrate opacity.19
D.2 Gloss .19
D.3 Over-laminate.19
© ISO/IEC 2000 – All rights reserved iii

ISO/IEC 15416:2000(E)
D.4 Static reflectance measurements.19
D.4.1 Prediction of Symbol Contrast (SC).20
D.4.2 Prediction of Minimum Edge Contrast (EC ) and Modulation (MOD) .20
min
D.4.3 Acceptability of measured and derived values.22
Annex E (informative) Interpretation of the scan refle
...