iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 4817:2012

(Main)

Aerospace series - Passive UHF RFID tags intended for aircraft use

Aerospace series - Passive UHF RFID tags intended for aircraft use

The scope of this European Standard is to:
-   Provide a requirements document for RFID Tag Manufacturers to produce passive UHF tags for the Aerospace industry.
-   Identify the minimum performance requirements specific to passive UHF tags used on aircraft parts, accessed only during ground operations.
-   Specify the test requirements specific to passive UHF tags for airborne use, in addition to EUROCAE ED 14 / RTCA DO-160 latest issue compliance requirements separately called out in this document.
-   Identify existing standards applicable to passive UHF tags.
-   Provide a qualification standard for passive UHF tags which will use permanently-affixed installation on aircraft and aircraft parts.

Luft- und Raumfahrt - Passive UHF-RFID-Tags für Luftfahrtanwendungen

Anwendungsbereich dieser Europäischen Norm:
-   Aufstellung einer Anforderungsdokumentation für Hersteller von RFID-Tags für die Fertigung von passiven UHF-Tags zur Anwendung in der Luft- und Raumfahrt.
-   Festlegung von spezifischen Mindestleistungsanforderungen für passive UHF-Tags zur Verwendung an Luftfahrzeugteilen, wobei der Zugriff nur am Boden erfolgt
-   Festlegung zusätzlicher Prüfanforderungen speziell für passive UHF-Tags zum Einsatz in der Luft. Diese Anforderungen gelten neben den Konformitätsanforderungen nach EUROCAE ED-14 / RTCA DO 160 (aktuelle Version), die in diesem Dokument separat benannt sind.
-   Benennung bestehender Normen, die auf passive UHF-Tags anwendbar sind.
-   Aufstellung einer Qualifikationsnorm für passive UHF-Tags, die dauerhaft an Luftfahrzeugen oder Luft-fahrzeugteilen angebracht werden sollen.

Série aérospatiale - Tags passifs d'identification par radiofréquence Ultra Haute Fréquence (RFID UHF) pour usage aéronautique

Aeronavtika - Pasivne priponke UHF RFID za uporabo v letalstvu

Namen tega evropskega standarda je: – proizvajalcem priponk RFID zagotoviti dokument z zahtevami za izdelavo pasivnih priponk UHF za aeronavtični sektor; – določiti minimalne zahteve glede zmogljivosti, specifične za pasivne priponke UHF, ki se uporabljajo na delih letal, do katerih se dostopa le pri dejavnostih na tleh; – določiti preskusne zahteve, specifične za priponke UHF za uporabo med letenjem, poleg zahtev glede skladnosti iz zadnje izdaje EUROCAE ED-14 / RTCA DO-160, h katerim se v tem dokumentu ločeno poziva; – opredeliti obstoječe standarde, ki se lahko uporabljajo za pasivne priponke UHF; – določiti kvalifikacijski standard za pasivne priponke UHF, v zvezi s katerimi se bo na letalu ali njegovih delih uporabljala stalna namestitev.

General Information

Status
Withdrawn
Publication Date
15-May-2012
Withdrawal Date
24-Oct-2023
ICS
35.240.60 - IT applications in transport
49.035 - Components for aerospace construction
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 1 - General
Current Stage
Ref Project
SIST EN 4817:2012 - Aerospace series - Passive UHF RFID tags intended for aircraft use

Relations

Replaced By
EN 4905:2023 - Aerospace series - Passive UHF RFID for airborne use
Effective Date
18-Jan-2023

Buy Standard

EN 4817:2012EN 4817:2012
PreviousNext
Standard
EN 4817:2012
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4817:2012
01-september-2012
Aeronavtika - Pasivne priponke UHF RFID za uporabo v letalstvu
Aerospace series - Passive UHF RFID tags intended for aircraft use
Luft- und Raumfahrt - UHF Passiv RFID-Tags für Luftfahrtverwendung
Série aérospatiale - Tags passifs d'identification par radiofréquence Ultra Haute
Fréquence (RFID UHF) pour usage aéronautique
Ta slovenski standard je istoveten z: EN 4817:2012
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 4817:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4817:2012

---------------------- Page: 2 ----------------------

SIST EN 4817:2012


EUROPEAN STANDARD
EN 4817

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2012
ICS 35.240.60; 49.035
English Version
Aerospace series - Passive UHF RFID tags intended for aircraft
use
Série aérospatiale - Tags passifs d'identification par Luft- und Raumfahrt - UHF Passiv RFID-Tags für
radiofréquence Ultra Haute Fréquence (RFID UHF) pour Luftfahrtverwendung
usage aéronautique
This European Standard was approved by CEN on 25 February 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4817:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4817:2012
EN 4817:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 General requirements .9
5 General configuration . 10
6 Applicability . 10
7 Requirements . 10
Bibliography . 15

2

---------------------- Page: 4 ----------------------

SIST EN 4817:2012
EN 4817:2012 (E)
Foreword
This document (EN 4817:2012) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2012, and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 4905:2023(Main)
Aerospace series - Passive UHF RFID for airborne use
SIST EN 4905:2023

This document is applicable to new manufactured tags after publication of this document.
This document aims to:
-   provide specification for RFID tag manufacturers to design and manufacture passive UHF RFID tags for the aeronautical industry;
-   identify required performances for UHF RFID tags in order to be read/written during ground operations only, while being subject to the global flight environment;
-   identify functional and environmental validation tests to be performed on passive UHF RFID tags with associated pass/fail criteria as well as associated test methods;
-   check functionalities and resistance to environment for airborne passive UHF RFID tags.
This document does not apply to:
-   the reader (interrogator – readers). It will be addressed appropriately by individual applicants;
-   active RFID devices or battery assisted passive (BAP) RFID devices;
-   RFID tags designed to operate outside the 860 MHz to 960 MHz frequency range.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4906:2023(Main)
Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags
SIST EN 4906:2023

This document is applicable in the aeronautical domain to on-board parts and to equipment intended to be embedded or positioned on any civil or military airborne vehicle with a type certificate.
The purpose of this document is to guide design, manufacturing, maintenance and operations organizations in the installation, removal and replacement of RFID tags (UHF and HF) and Contact Memory Buttons (CMB), according to the environments defined in RTCA DO-160/EUROCAE ED-14 and according to the type of support and the expected fixation performances. This guide will provide help in the specification of the tag installation/removal functions and/or will enable the solutions on offer from tag suppliers to be enhanced.
The term "tag" used in this document covers all the tags used to store electronic data, including RFID tags and CMB tags. As a reminder, the tags can also contain information that can be read by devices other than RFID or CMB readers (e.g. bar codes - Data Matrix, QR codes, etc., and/or alphanumerical characters) and information that can be read by the naked eye without any tools (human-readable).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4819:2012(Main)
Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use
SIST EN 4819:2012

The scope of this European Standard is to:
•   Provide a requirements document for CMB Manufacturers to produce systems for the Aerospace and Defence industry.
•   Identify the minimum performance requirements specific to CMB used on Aerospace and Defence vehicle parts accessed only during ground operations.
•   Identify existing standards applicable to CMB.
•   Provide a qualification standard for CMB which will use permanently-affixed installation on systems.
•   Provide some patterns of data.
In addition to any relevant document from certification authorities, the following documents should be taken into account to define requirements concerning the technical specifications for CMB:
•   EUROCAE documents: ED-14, Environmental Conditions and Test Procedures for Airborne Equipment.
•   RTCA documents: DO-160, Environmental Conditions and Test Procedures for Airborne Equipment.
•   Military Standard: MIL-STD-810, Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4818:2012(Main)
Aerospace series - Passive HF RFID tags intended for aircraft use
SIST EN 4818:2012

The scope of this European Standard is to:
-   Provide a requirements document for RFID Tag Manufacturers to produce passive HF tags for the Aerospace industry.
-   Identify the minimum performance requirements specific to passive HF tags used on aircraft parts, accessed only during ground operations.
-   Specify the test requirements specific to passive HF tags for airborne use, in addition to EUROCAE ED-14 / RTCA DO-160 latest issue compliance requirements separately called out in this document.
-   Identify existing standards applicable to passive HF tags.
-   Provide a qualification standard for passive HF tags which will use permanently-affixed installation on aircraft and aircraft parts.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4905:2023(Main)
Aerospace series - Passive UHF RFID for airborne use
SIST EN 4905:2023

This document is applicable to new manufactured tags after publication of this document.
This document aims to:
-   provide specification for RFID tag manufacturers to design and manufacture passive UHF RFID tags for the aeronautical industry;
-   identify required performances for UHF RFID tags in order to be read/written during ground operations only, while being subject to the global flight environment;
-   identify functional and environmental validation tests to be performed on passive UHF RFID tags with associated pass/fail criteria as well as associated test methods;
-   check functionalities and resistance to environment for airborne passive UHF RFID tags.
This document does not apply to:
-   the reader (interrogator – readers). It will be addressed appropriately by individual applicants;
-   active RFID devices or battery assisted passive (BAP) RFID devices;
-   RFID tags designed to operate outside the 860 MHz to 960 MHz frequency range.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4906:2023(Main)
Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags
SIST EN 4906:2023

This document is applicable in the aeronautical domain to on-board parts and to equipment intended to be embedded or positioned on any civil or military airborne vehicle with a type certificate.
The purpose of this document is to guide design, manufacturing, maintenance and operations organizations in the installation, removal and replacement of RFID tags (UHF and HF) and Contact Memory Buttons (CMB), according to the environments defined in RTCA DO-160/EUROCAE ED-14 and according to the type of support and the expected fixation performances. This guide will provide help in the specification of the tag installation/removal functions and/or will enable the solutions on offer from tag suppliers to be enhanced.
The term "tag" used in this document covers all the tags used to store electronic data, including RFID tags and CMB tags. As a reminder, the tags can also contain information that can be read by devices other than RFID or CMB readers (e.g. bar codes - Data Matrix, QR codes, etc., and/or alphanumerical characters) and information that can be read by the naked eye without any tools (human-readable).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4819:2012(Main)
Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use
SIST EN 4819:2012

The scope of this European Standard is to:
•   Provide a requirements document for CMB Manufacturers to produce systems for the Aerospace and Defence industry.
•   Identify the minimum performance requirements specific to CMB used on Aerospace and Defence vehicle parts accessed only during ground operations.
•   Identify existing standards applicable to CMB.
•   Provide a qualification standard for CMB which will use permanently-affixed installation on systems.
•   Provide some patterns of data.
In addition to any relevant document from certification authorities, the following documents should be taken into account to define requirements concerning the technical specifications for CMB:
•   EUROCAE documents: ED-14, Environmental Conditions and Test Procedures for Airborne Equipment.
•   RTCA documents: DO-160, Environmental Conditions and Test Procedures for Airborne Equipment.
•   Military Standard: MIL-STD-810, Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4818:2012(Main)
Aerospace series - Passive HF RFID tags intended for aircraft use
SIST EN 4818:2012

The scope of this European Standard is to:
-   Provide a requirements document for RFID Tag Manufacturers to produce passive HF tags for the Aerospace industry.
-   Identify the minimum performance requirements specific to passive HF tags used on aircraft parts, accessed only during ground operations.
-   Specify the test requirements specific to passive HF tags for airborne use, in addition to EUROCAE ED-14 / RTCA DO-160 latest issue compliance requirements separately called out in this document.
-   Identify existing standards applicable to passive HF tags.
-   Provide a qualification standard for passive HF tags which will use permanently-affixed installation on aircraft and aircraft parts.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day