EN 13956:2012
(Main)Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
This European Standard specifies the definitions and characteristics of plastic and rubber sheets including sheets made out of their blends and alloys (thermoplastic rubber) for which the intended use is roof waterproofing. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard.
NOTE For typical materials and applications, see Annex E.
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Definitionen und Eigenschaften
Diese Europäische Norm legt die Definitionen und Eigenschaften von Kunststoff- und Elastomerbahnen einschließlich der aus deren Gemischen und Mischungen (thermoplastische Elastomere) hergestellten Bahnen fest, die hauptsächlich für Dachsysteme verwendet werden. Sie legt die Anforderungen und Prüfverfahren fest und schafft die Voraussetzungen für die Bewertung der Konformität der Produkte mit den Anforderungen dieser Europäischen Norm.
ANMERKUNG Siehe Anhang E hinsichtlich üblicher Werkstoffe und Anwendungen.
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomères - Définitions et caractéristiques
La présente norme européenne spécifie les définitions et caractéristiques des feuilles plastiques et élastomères, y compris les feuilles composées de mélanges de plastiques et d’élastomères (caoutchouc thermoplastique) dont l’utilisation prévue est l’étanchéité des toitures. Elle spécifie les exigences et les méthodes d’essais et prévoit le cadre d’évaluation de la conformité des produits aux exigences de la présente norme.
NOTE Pour les matériaux et applications spécifiques, voir Annexe E.
Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Definicije in lastnosti
Ta evropski standard določa definicije in lastnosti polimernih in elastomernih trakov ter trakov iz mešanic in zlitin navedenih materialov (termoplastična guma) za tesnjenje streh. Določa zahteve in preskusne metode ter predvideva vrednotenje skladnosti proizvodov z zahtevami iz tega evropskega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Definicije in lastnostiAbdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Definitionen und EigenschaftenFeuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomères - Définitions et caractéristiquesFlexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofs01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13956:2012SIST EN 13956:2013en,fr,de01-februar-2013SIST EN 13956:2013SLOVENSKI
STANDARDSIST EN 13956:2005/AC:2006SIST EN 13956:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13956
December 2012 ICS 01.040.91; 91.100.50 Supersedes EN 13956:2005English Version
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomères - Définitions et caractéristiques
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Definitionen und Eigenschaften This European Standard was approved by CEN on 27 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13956:2012: ESIST EN 13956:2013
Applicability of characteristics . 14Annex B (normative)
Initial type test and frequencies of testing for factory production control. 16Annex C (informative)
Information about chemical resistance . 17Annex D (informative)
Example of a product data sheet. 19Annex E (informative)
Typical materials, structure of sheets and roofing systems . 21Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 25Bibliography . 38 SIST EN 13956:2013
new extended mounting and fixing rules;
introduction of indirect testing for factory production control. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
EN 1850-2, Flexible sheets for waterproofing — Determination of visible defects — Part 2: Plastic and rubber sheets for roof waterproofing EN 1928, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of watertightness EN 1931, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of water vapour transmission properties EN 12310-2, Flexible sheets for waterproofing — Determination of resistance to tearing — Part 2: Plastic and rubber sheets for roof waterproofing EN 12311-2, Flexible sheets for waterproofing — Determination of tensile properties — Part 2: Plastic and rubber sheets for roof waterproofing SIST EN 13956:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.