iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 12312-1:2022/A11:2024

(Amendment)

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use

Augen- und Gesichtsschutz - Sonnenbrillen und ähnlicher Augenschutz - Teil 1: Sonnenbrillen für den allgemeinen Gebrauch

Protection des yeux et du visage - Lunettes de soleil et articles de lunetterie associés - Partie 1: Lunettes de soleil pour usage général

Varovanje oči in obraza - Sončna očala in sorodna oprema za varovanje oči - 1. del: Sončna očala za splošno uporabo - Dopolnila A11

General Information

Status
Published
Publication Date
24-Sep-2024
ICS
13.340.20 - Head protective equipment
Technical Committee
CEN/TC 85 - Eye-protective equipment
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Sep-2024
Due Date
25-Sep-2024
Completion Date
25-Sep-2024
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
Mandate
M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
Ref Project
SIST EN ISO 12312-1:2022/A11:2025 - Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use

Relations

Amends
EN ISO 12312-1:2022 - Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
Effective Date
29-May-2024

Buy Standard

EN ISO 12312-1:2022/A11:2025EN ISO 12312-1:2022/A11:2025
PreviousNext
Amendment
EN ISO 12312-1:2022/A11:2025
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Varovanje oči in obraza - Sončna očala in sorodna oprema za varovanje oči - 1.
del: Sončna očala za splošno uporabo - Dopolnila A11
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for
general use
Augen- und Gesichtsschutz - Sonnenbrillen und ähnlicher Augenschutz - Teil 1:
Sonnenbrillen für den allgemeinen Gebrauch
Protection des yeux et du visage - Lunettes de soleil et articles de lunetterie associés -
Partie 1: Lunettes de soleil pour usage général
Ta slovenski standard je istoveten z: EN ISO 12312-1:2022/A11:2024
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12312-
EUROPEAN STANDARD
1:2022/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2024
ICS 13.340.20
English Version
Eye and face protection - Sunglasses and related eyewear -
Part 1: Sunglasses for general use
Protection des yeux et du visage - Lunettes de soleil et Augen- und Gesichtsschutz - Sonnenbrillen und
articles de lunetterie associés - Partie 1: Lunettes de ähnlicher Augenschutz - Teil 1: Sonnenbrillen für den
soleil pour usage général allgemeinen Gebrauch
This amendment A11 modifies the European Standard EN ISO 12312-1:2022; it was approved by CEN on 21 August 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12312-1:2022/A11:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation 2016/425 aimed to be covered . 4

European foreword
This document (EN ISO 12312-1:2022/A11:2024) has been prepared by Technical Committee
CEN/TC 85 “Eye protective equipment” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 12312-1:2022 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by March
2025, and conflicting national standards shall be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Icelan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12311:2023(Main)
Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)
SIST EN ISO 12311:2024

This document specifies reference's test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods can be used if proven to be equivalent.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
SIST EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
SIST EN ISO 18527-1:2022

This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities.
This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses.
It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer.
Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A.
This document does not apply to
a)   eye protectors for protection when operating or travelling on a motorized vehicle,
b)   eye protectors for protection against optical radiation from artificial sources, such as those used in solaria,
c)   eye protectors for direct observation of the sun, and
d)   eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-3:2022(Main)
Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
SIST EN ISO 16321-3:2022

This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321‑1.
This document also applies to mesh protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself".
This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321‑1 will be needed.
This document does not apply to mesh protectors used in sports such as fencing.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-1:2022(Main)
Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)
SIST EN ISO 16321-1:2022

This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.
Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively. ISO 16321-4 provides requirements and guidance on protectors against biological hazards1).
This document applies to:
— all plano as well as corrective and prescription lensed protectors and components;
— those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself";
— those eye and face protectors used in educational establishments.
This document does not apply to:
— protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies;
— protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;
— patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463);
— protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies;
— protectors specifically intended for sports for which the ISO 18527 series applies;
— laser protectors;
— face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;
— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.
1) In preparation.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-2:2021(Main)
Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
SIST EN ISO 16321-2:2021

This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards, such as optical radiation, impacts from flying particles and fragments, and hot solids during welding and related techniques. The other applicable requirements for welding protectors are given in ISO 16321‑1.
This document also applies to welding protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself".

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-2:2021(Main)
Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
SIST EN ISO 18527-2:2021

This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles.
It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer.
Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A.
This document does not apply to
a)   sports eye protectors designed for use over prescription spectacles,
b)   eye protectors for other occupational applications,
c)   eye protectors without lenses,
d)   eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and
e)   eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19818-1:2021(Main)
Eye and face protection - Protection against laser radiation - Part 1: Requirements and test methods (ISO 19818-1:2021)
SIST EN ISO 19818-1:2021

This document is applicable to protectors intended to provide protection against accidental exposure to laser radiation within the wavelength range 180 nm to 1 mm. It specifies the requirements, test methods and marking. Protectors intended for adjustment work on lasers are included in the scope of this document and are marked in the same way as other protectors, but selection of appropriate eyewear for a specific application is a choice of the user. Laser protective filters used as viewing windows in laser equipment machinery or incorporated into optical instruments such as operating microscopes and loupes that may be used for deliberate viewing of laser radiation as part of their function are outside the scope of this document.
Laser radiation in the wavelength range below 180 nm is absorbed in air, therefore eye and face protection should not be required.
This document is applicable to devices intended for patient protection during medical laser procedures except for treatment in the periorbital area. Guidance on eye protectors for patients (including those used for periorbital treatment) is given in ISO/TR 22463.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19734:2021(Main)
Eye and face protection - Guidance on selection, use and maintenance (ISO 19734:2021)
SIST EN ISO 19734:2021

This document gives guidance to specifiers and users on the control of eye and face hazards including physical, mechanical, chemical, optical radiation and biological and on the selection, use and maintenance of eye and face protectors.
This document applies to
—     occupational use,
—      tasks that are performed similarly to those in an occupation but not in the workplace, e.g. "do-it-yourself", and
—     schools, educational and research establishments.
This document does not apply to eye and face protection for
—     ionizing radiation,
—     low frequency radio waves,
—     microwaves,
—     sports or vehicular usage, and
—     sunglasses for general (not occupational) use ? see ISO 12312-1.
NOTE     The ISO 18527 (all parts) sets requirements for eye protectors for some sports.
Brief advice on protection when using lasers is included but for detailed advice, see IEC/TR 60825-14.
This document is neither a whole nor partial substitute for risk assessment, which is an essential part of any eye and face protection programme.
Although this document has been written to help specifiers and users, any recommendations in this document are to be interpreted as guidance only and not intended to replace any national regulatory requirements. Risk assessment is the sole responsibility of the employer and not the PPE manufacturer or its authorised representative.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18526-1:2020(Main)
Eye and face protection - Test methods - Part 1: Geometrical optical properties (ISO 18526-1:2020)
SIST EN ISO 18526-1:2020

This document specifies the reference test methods for determining the spherical, cylindrical, and prismatic refractive power properties of unmounted and mounted plano lenses (non-corrective lenses) for eye and face protectors.
This document does not apply to any eye and face protection product requirement standards for which other test methods are specified.
Other test methods can be used provided they have been shown to be equivalent and include uncertainties of measurement no greater than those required by the reference method.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day