EN ISO 12780-1:2011

Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)

ISO 12780-1:2011 defines the terms and concepts related to straightness of individual integral features and covers complete straightness profiles only.

Geometrische Produktspezifikation (GPS) - Geradheit - Teil 1: Begriffe und Kenngrößen der Geradheit (ISO 12780-1:2011)

Dieser Teil von ISO 12780 definiert Begriffe, die mit der Geradheit von Geometrieelementen zusammen-hängen, und gilt nur für Geradheitsprofile.
ANMERKUNG Die Geradheit einer erfassten abgeleiteten Achse eines Zylinders ist in ISO 12180-1 und ISO 12180-2 definiert.

Spécification géométrique des produits (GPS) - Rectitude - Partie 1: Vocabulaire et paramètres de rectitude (ISO 12780-1:2011)

L'ISO 12780-1:2011 définit les termes et concepts liés à la rectitude des éléments intégraux individuels et couvre uniquement les profils de rectitude complets.

Specifikacija geometrijskih veličin izdelka - Premost - 1. del: Slovar in parametri premosti (ISO 12780-1:2011)

Ta del ISO 12780 določa izraze in koncepte, povezane s premostjo posameznih vgrajenih funkcij, in zajema samo celotne preme profile.

General Information

• Status: Published
• Publication Date: 31-Mar-2011
• Withdrawal Date: 30-Oct-2011
• ICS: 01.040.17 - Metrology and measurement. Physical phenomena (Vocabularies)
• ICS: 17.040.01 - Linear and angular measurements in general
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN ISO 12780-1:2011 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)

Relations

• Replaces: CEN ISO/TS 12780-1:2007 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003)
• Effective Date: 09-Apr-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12780-1:2011
01-oktober-2011
1DGRPHãþD
SIST-TS CEN ISO/TS 12780-1:2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND3UHPRVWGHO6ORYDULQSDUDPHWUL
SUHPRVWL,62
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and
parameters of straightness (ISO 12780-1:2011)
Geometrische Produktspezifikation (GPS) - Geradheit - Teil 1: Begriffe und Kenngrößen
der Geradheit (ISO 12780-1:2011)
Spécification géométrique des produits (GPS) - Rectitude - Partie 1: Vocabulaire et
paramètres de rectitude (ISO 12780-1:2011)
Ta slovenski standard je istoveten z: EN ISO 12780-1:2011
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND*36 Specification (GPS)
SIST EN ISO 12780-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12780-1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12780-1:2011


EUROPEAN STANDARD
EN ISO 12780-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 01.040.17; 17.040.20 Supersedes CEN ISO/TS 12780-1:2007
English Version
Geometrical product specifications (GPS) - Straightness - Part
1: Vocabulary and parameters of straightness (ISO 12780-
1:2011)
Spécification géométrique des produits (GPS) - Rectitude - Geometrische Produktspezifikation (GPS) - Geradheit - Teil
Partie 1: Vocabulaire et paramètres de rectitude (ISO 1: Begriffe und Kenngrößen der Geradheit (ISO 12780-
12780-1:2011) 1:2011)
This European Standard was approved by CEN on 17 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12780-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12780-1:2011
EN ISO 12780-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12780-1:2011
EN ISO 12780-1:2011 (E)
Foreword
This document (EN ISO 12780-1:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 12780-1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12780-1:2011 has been approved by CEN as a EN ISO 12780-1:2011
...